B101EW05-V110.pdf , 데이터시트 , 데이타시트

No Preview Available !

Product Specification

AU OPTRONICS CORPORATION

(V ) Preliminary Specifications

( ) Final Specifications

Module

Model Name

Note

10.1”(10.07”) WXGA 16:10 Color TFT-LCD

with LED Backlight design

B101EW05 V110 ( HW: 0A)

LED Backlight with driving circuit design

Color Management (Virtual and Rich Color Solution )

Dynamic Contrast Ratio (Power Saving Solution)

Customer

Date

Approved by

Date

Checked &

Approved by

Date

Note: This Specification is subject to change

without notice.

Boris Chu

01/25/2011

Prepared by

Rod Lee

01/25/2011

NBBU Marketing Division

AU Optronics corporation

B101EW05 V1 Document Version : 0.1

1 of 30

No Preview Available !

Product Specification

AU OPTRONICS CORPORATION

Contents

1. Handling Precautions .............................................................. 4

2. General Description ................................................................ 5

2.1 General Specification ..........................................................................................................................5

2.2 Optical Characteristics ........................................................................................................................6

3. Functional Block Diagram ..................................................... 11

4. Absolute Maximum Ratings................................................... 12

4.1 Absolute Ratings of TFT LCD Module.............................................................................................12

4.2 Absolute Ratings of Environment .....................................................................................................12

5. Electrical Characteristics....................................................... 13

5.1 TFT LCD Module..............................................................................................................................13

5.2 Backlight Unit ...................................................................................................................................15

6. Signal Interface Characteristic.............................................. 17

6.1 Pixel Format Image ...........................................................................................................................17

6.2 The Input Data Format ......................................................................................................................18

6.3 Integration Interface Requirement ................................................................................... 19

6.4 LVDS Interface Timing

6.5 Power ON/OFF Sequence............................................................................................... 23

7. Panel Reliability Test ............................................................ 24

7.1 Reliability Test.......................................................................................................................................

8. Mechanical Characteristics.................................................... 25

8.1 LCM Outline Dimension...................................................................................................................25

9. Shipping and Package ........................................................... 25

9.1 Shipping Label Format ......................................................................................................................25

9.2 Carton Package..................................................................................................................................26

9.3 Shipping Package of Palletizing Sequence........................................................................................26

10. Appendix............................................................................. 27

10.1 EDID Description................................................................................................................................

B101EW05 V1 Document Version : 0.1

2 of 30

No Preview Available !

Product Specification

AU OPTRONICS CORPORATION

Record of Revision

Version and Date Page

0.1 2011/01/25 All

Old description

First Edition for Customer

New Description

Remark

B101EW05 V1 Document Version : 0.1

3 of 30

No Preview Available !

Product Specification

AU OPTRONICS CORPORATION

1. Handling Precautions

1) Since front polarizer is easily damaged, pay attention not to scratch it.

2) Be sure to turn off power supply when inserting or disconnecting from input connector.

3) Wipe off water drop immediately. Long contact with water may cause discoloration or

spots.

4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.

5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard

surface.

6) Since CMOS LSI is used in this module, take care of static electricity and insure

human earth when handling.

7) Do not open nor modify the Module Assembly.

8) Do not press the reflector sheet at the back of the module to any directions.

9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor

tilt the Interface Connector of the TFT Module.

11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for

example), do not twist nor bend the TFT Module even momentary. At designing the

enclosure, it should be taken into consideration that no bending/twisting forces are

applied to the TFT Module from outside. Otherwise the TFT Module may be

damaged.

12)Small amount of materials having no flammability grade is used in the LCD module. The

LCD module should be supplied by power complied with requirements of Limited Power

Source (IEC60950 or UL1950), or be applied exemption.

13)Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO

NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module

that a LED light bar build in as a light source of back light unit. It can prevent electrostic

breakdown.

B101EW05 V1 Document Version : 0.1

4 of 30

No Preview Available !

Product Specification

AU OPTRONICS CORPORATION

2. General Description

B101EW05 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a

driver circuit, and LED backlight system. The screen format is intended to support the 16:10

WXGA, 1280(H) x800(V) screen and 262k colors (RGB 6-bits data driver) with LED backlight

driving circuit. All input signals are LVDS interface compatible.

B101EW05 is designed for a display unit of notebook style personal computer and industrial

machine.

2.1 General Specification

℃The following items are characteristics summary on the table at 25 condition:

Items

Screen Diagonal

Active Area

Pixels H x V

Pixel Pitch

Pixel Format

Display Mode

White Luminance (ILED=21mA)

(Note: ILED is LED current)

Unit

[mm]

Specifications

255.85 (10.07W”)

216.96(H) x 135.6(V)

[mm]

1280 x 3(RGB) x 800

0.1695 X 0.1695

R.G.B. Vertical Stripe

[cd/m2]

Normally Black

350 typ. (5 points average )

297 min. (5 points average )

Luminance Uniformity

Contrast Ratio

Response Time

Nominal Input Voltage VDD

Power Consumption

Weight

Physical Size

without bracket

Electrical Interface

1.25 max. (5 points)

1300 typ, 1000 min.

[ms] 25 typ / 35 Max

[Volt] +3.3 typ.

[Watt] 3.4 max. (Include Logic and BLU power)

[Grams] 180max

[mm]

Min. Typ. Max.

Length 228.96 229.46 229.95

Width

148.6

149.1

149.6

Thickness

---

--- 5.2

1 channel LVDS

B101EW05 V1 Document Version : 0.1

5 of 30