PS9313L.pdf 데이터시트 (총 17 페이지) - 파일 다운로드 PS9313L 데이타시트 다운로드

No Preview Available !

PHOTOCOUPLER
PS9313L,PS9313L2
1 Mbps, OPEN COLLECTOR OUTPUT TYPE,
HIGH CMR, INTELLIGENT POWER MODULE DRIVE NEPOC Series
8 mm CREEPAGE 6-PIN SDIP PHOTOCOUPLER
DESCRIPTION
The PS9313L and PS9313L2 are optical coupled isolators containing a GaAlAs LED on the input side and a photo
diode and a signal processing circuit on the output side on one chip.
The PS9313L and PS9313L2 are specified high CMR, high CTR and pulse width distortion with operating
temperature. It is suitable for IPM drive.
The PS9313L is lead bending type (Gull-wing) for surface mounting.
The PS9313L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.
FEATURES
• High common mode transient immunity (CMH, CML = ±15 kV/µs MIN.)
• Half size of 8-pin DIP
• Long creepage distance (8 mm MIN. : PS9313L2)
• High-speed response (tPHL = 500 ns MAX., tPLH = 750 ns MAX.)
• Maximum propagation delays (tPLH tPHL = 220 ns TYP.)
• Pulse width distortion (tPHL tPLH= 220 ns TYP.)
• High isolation voltage (BV = 5 000 Vr.m.s.)
• Open collector output
• Pb-Free product
• Safety standards
• UL approved: No. E72422
<R> • CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
• DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40024069 (Option)
APPLICATIONS
• IPM Driver
• General purpose inverter
PIN CONNECTION
(Top View)
654
1. Anode
2. NC
3. Cathode
4. GND
5. VO
6. VCC
123
TRUTH TABLE
LED
ON
OFF
Output
L
H
Document No. PN10689EJ05V0DS (5th edition)
Date Published June 2009 NS
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
2007, 2009

No Preview Available !

PACKAGE DIMENSIONS (UNIT: mm)
Lead Bending Type (Gull-wing) For Surface Mount
(0.82)
4.58±0.3
PS9313L
PS9313L,PS9313L2
9.7±0.3
7.62
0.4±0.1
1.27
0.25 M
0.8±0.25
Lead Bending Type For Long Creepage Distance (Gull-wing) For Surface Mount
(0.82)
4.58±0.3
PS9313L2
11.5±0.3
7.62
0.4±0.1
1.27
0.25 M
0.75±0.25
2 Data Sheet PN10689EJ05V0DS

No Preview Available !

<R> MARKING EXAMPLE
PS9313L,PS9313L2
No. 1 pin Mark
9313
N931
Type Number
Assembly Lot
N 9 31
Week Assembled
Year Assembled
(Last 1 Digit)
Rank Code
PHOTOCOUPLER CONSTRUCTION
Parameter
Air Distance (MIN.)
Outer Creepage Distance (MIN.)
Isolation Distance (MIN.)
PS9313L
7 mm
7 mm
0.4 mm
PS9313L2
8 mm
8 mm
0.4 mm
ORDERING INFORMATION
Part Number
Order Number
PS9313L
PS9313L-AX
PS9313L-E3
PS9313L-E3-AX
PS9313L2
PS9313L2-AX
PS9313L2-E3 PS9313L2-E3-AX
PS9313L-V
PS9313L-V-AX
PS9313L-V-E3 PS9313L-V-E3-AX
PS9313L2-V
PS9313L2-V-AX
PS9313L2-V-E3 PS9313L2-V-E3-AX
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application Part
Number*1
Pb-Free
20 pcs (Tape 20 pcs cut)
Standard products PS9313L
(Ni/Pd/Au)
Embossed Tape 2 000 pcs/reel (UL, CSA approved)
20 pcs (Tape 20 pcs cut)
PS9313L2
Embossed Tape 2 000 pcs/reel
20 pcs (Tape 20 pcs cut)
DIN EN60747-5-2 PS9313L
Embossed Tape 2 000 pcs/reel (VDE0884 Part2)
20 pcs (Tape 20 pcs cut)
Approved (Option) PS9313L2
Embossed Tape 2 000 pcs/reel
*1 For the application of the Safety Standard, following part number should be used.
Data Sheet PN10689EJ05V0DS
3