OB3396
High Precision Off-line Primary-Side PWM Power Switch
GENERAL DESCRIPTION
OB3396 is a primary side regulation off-line LED
lighting controller which can achieve accurate LED
current. It significantly simplifies LED lighting
system design by eliminating the secondary side
feedback circuitry. Proprietary Constant Voltage
(CV) and Constant Current (CC) control is
integrated as shown in the figure below.
The LED current (CC control) can be adjusted
externally by the resistor Rs at SOURCE pin.
Device operates in PFM in CC mode as well at
large load condition and it operates in PWM with
frequency reduction at light/medium load.
OB3396 offers comprehensive protection
coverage with auto-recovery features including
Cycle-by-Cycle current limiting, VDD OVP, VDD
clamp and UVLO. Excellent EMI performance is
achieved with On-Bright proprietary frequency
shuffling technique.
OB3396 is offered in DIP8 package.
FEATURES
High Precise Constant Current Regulation at
Universal AC input
Primary-side Sensing and Regulation Without
TL431 and Opto-coupler
Programmable CC Regulation
Adjustable Constant Current and Output
Power Setting
Built-in Secondary Constant Current Control
with Primary Side Feedback
Built-in Adaptive Current Peak Regulation
Built-in Primary winding inductance
compensation
Power on Soft-start
Built-in Leading Edge Blanking (LEB)
Cycle-by-Cycle Current Limiting
VDD Under Voltage Lockout with Hysteresis
(UVLO)
VDD OVP
VDD Clamp
APPLICATIONS
Low Power AC/DC offline SMPS for
LED applications
Fig.1. Typical CC/CV Curve
TYPICAL APPLICATION
.
©On-Bright Electronics
Confidential
-1-
Preliminary Datasheet
OB_DOC_DS_339600