IAQS80.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 IAQS80 데이타시트 다운로드

No Preview Available !

Engineering Specification
Engineering Specification
Type 21.3 QSXGA Monochrome TFT/LCD Module
Model Name:IAQS80
Document Control Number : OEM I-980-03
Note:Specification is subject to change without notice. Consequently it is better to contact to
International Display Technology before proceeding with the design
of your product incorporating this module.
Sales Support
International Display Technology
(C) Copyright International Display Technology 2002 All Rights reserved.
October 8,2002
OEM I-980-03
1/33

No Preview Available !

Engineering Specification
i Contents
i Contents
ii Record of Revision
1.0 Handling Precautions
2.0 General Description
2.1 Characteristics
2.2 Functional Block Diagram
3.0 Absolute Maximum Ratings
4.0 Optical Characteristics
5.0 Physical Interface
5.1 Signal Connectors
5.2 Back Light Connector
5.3 Interface Signal Description
5.4 Interface Signal Electrical Characteristics
5.4.1 Signal Electrical Characteristics for LVDS Receiver
5.4.2 Back Light Control Signal Electrical Characteristics
5.4.3 Recommended Guidelines for Motherboard PCB Design and Cable Selection
6.0 Pixel format image
7.0 Interface Timings
7.1 Timing Characteristics
8.0 Power Consumption
9.0 Power ON/OFF Sequence
10.0 Mechanical Characteristics
11.0 National Test Lab Requirement
(C) Copyright International Display Technology 2002 All Rights reserved.
October 8,2002
OEM I-980-03
2/33

No Preview Available !

Engineering Specification
ii Record of Revision
Date
May 22,2002
Document
Revision
OEM I-980-01
Page
All
September 4,2002 OEM I-980-02
(Preliminary)
October 8,2002
OEM I-980-03
6
6, 9
6, 27
18, 26
28
29, 30
8
9
14
22
32
33
Summary
First Edition for customer.
Based on Internal Spec. as of May 15,2002.
To release as Preliminary.
To update Weight.
To update Optical Rise Time/Fall Time.
To update Power Consumption.
To delete (TBD).
To update Power ON/OFF Sequence.
To update Reference Drawings.
To add Note for Absolute Maximum Ratings.
To update Note for Optical Characteristics.
To update Description for BLON in Backlight Power
Connector Signal Description for CN-1.
To update Inverter Input Signal Electrical Characteristics.
To update VDIM versus Dimming Range.
To add Active Area/Sensor Area.
To update National Test Lab Requirement.
(C) Copyright International Display Technology 2002 All Rights reserved.
October 8,2002
OEM I-980-03
3/33