A060SE02-V5.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 A060SE02-V5 데이타시트 다운로드

No Preview Available !

CUSTOMER APPROVAL SHEET
Company Name
MODEL
A060SE02 V5
CUSTOMER
APPROVED
APPROVAL FOR SPECIFICATIONS ONLY (Spec. Ver. 0.2)
APPROVAL FOR SPECIFICATIONS AND ES SAMPLE (Spec. Ver. 0.2)
APPROVAL FOR SPECIFICATIONS AND CS SAMPLE (Spec. Ver. 0.2)
CUSTOMER REMARK :
AUO PM : Ken CM Chen
P/N :
Comment :
1 Li-Hsin Rd. 2. Science-Based Industrial Park
Hsinchu 300, Taiwan, R.O.C.
Tel: +886-3-500-8899
Fax: +886-3-577-2730

No Preview Available !

Doc. version : 0.1
Total pages :
35
Date :
2010/07/13
Product Specification
6" EPD with touch panel MODULE
Model NameA060SE02 V5
Planned Lifetime: From 2010/May. To 2011/May.
Phase-out Control: From 2011/Feb. To 2011/May.
EOL Schedule:
2011/May.
< >Preliminary Specification
< >Final Specification
Note: The content of this
specification is subject to
change.
© 2010 AU Optronics
All Rights Reserved,
Do Not Copy.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

Version:
Page:
0.1
1/35
Version Revise Date Page
Record of Revision
Content
0.0 2010/05/19 All First Draft.
0 Modify Life Time, phase out control and EOL Time
3 Modify general information, overall dimension, and number of gray levels.
10 Add item “Image Update Time” to “D. Electrical Characteristic”
10 Update power consumption format
17 Update power on/off sequence
Modify value of “Reflectance” and remark
0.1 2010/6/10
Modify value of “Contrast Ratio” and remark
18, 19
Modify item “Response Time” to “Update Time”,
Remove definition of “Response Time”
Add Reliability Test Item “UV Exposure Resistance”, remove some items
20, 21
and modify remarks and notes
26 Add precaution items 19~21.
30 Update INT_SETTING default value
10 Update typical power consumption measured pattern
0.2 2010/7/13 20,21 Reliability Test Items number typo modify
26 Add precaution items 22,23
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

Version:
Page:
0.1
2/35
Contents
A. General Information..............................................................................................3
B. Outline Dimension ................................................................................................4
C. Electrical Specifications ........................................................................................5
1. Pin Assignment .................................................................................................................................................. 5
2. Touch Panel Pin Assignment ........................................................................................................................... 9
3. Absolute Maximum Ratings ............................................................................................................................ 9
D. Electrical Characteristics .....................................................................................10
E. Input timing AC Characteristics .......................................................................11
1. Horizontal input timing ...................................................................................................................................... 11
1.1 Relation ship of input data and source output voltage................................................................................ 12
2. Vertical input timing ............................................................................................................................................ 13
3. VCOM voltage definition ................................................................................................................................... 14
4. VCOM relationship.............................................................................................................................................. 14
5. Touch panel timing............................................................................................................................................... 15
F. Power On/Off Characteristics............................................................................17
1. Recommended Power On/off Sequence........................................................................................................ 17
G. Optical Specification ...........................................................................................18
H. Reliability Test Items.........................................................................................20
I. Packing and Marking ..........................................................................................22
1. Packing Form ...................................................................................................................................................... 22
2. Module/Panel Label Information ................................................................................................................... 23
3. Carton Label Information................................................................................................................................. 23
J. Application Note ..................................................................................................24
1. Application Circuit............................................................................................................................................ 24
2. Touch panel pin assign circuit............................................................................................................................ 25
L. Touch Panel Command and Register Map ........................................................27
1. I2C Protocol Definition ....................................................................................................................................... 27
2. Coordinate Register Map .................................................................................................................................... 29
3. Sensitivity .............................................................................................................................................................. 29
4. Interrupt Operation Mode .................................................................................................................................. 29
5. Power Mode ........................................................................................................................................................... 33
6. Calibration ............................................................................................................................................................. 35
7. Power On/Off Sequence...................................................................................................................................... 35
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

Version:
Page:
0.1
3/35
A. General Information
This display is a active matrix electrophoretic display (EPD), which comprises a-si TFT substrace,
electrophoretic front plane, protective anti-glare top-sheet, driver ICs, and FPC. It is designed for
applications such as e-book or e-reader.
NO.
Item
Unit
Specification
Remark
1
Screen Size
inch
6 (Diagonal)
2
Display Resolution
dot
800 (H)× 600(V)
3
Overall Dimension
mm 131.4(H) × 105.39(V) × (1.84) (T) Note 1
4
Active Area
mm 122.4(H)×90.6(V)
5
Dot Pitch
mm 0.153 (H)x 0.151(V)
6 Gray Level --
8
7 Weight g
8 Surface Treatment
(52)
AG (7.5 ± 2%)
Hard coating (3H)
Note 2
Note 1: Not include FPC and label. Refer to next page to get further information.
Note 2: 750 g load force on UNI/JPIA 3H pencil, speed is 3.5mm/s on the AG film and scratch
length is 1cm and write 5 handwriting, Scratch no. 2 is OK
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.