GT10.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 GT10 데이타시트 다운로드

No Preview Available !

Programmable Display
GT10/GT30
Technical Manual
Includes installation guide for GTWIN screen
creation software.
Applicable Models
GT10 (Ver. 1/Ver. 2)
GT30
is a global brand name of Matsushita Electric Works.

No Preview Available !

SAFETY PRECAUTIONS
[ALWAYS OBSERVE THESE PRECAUTIONS]
Before installing, operating, servicing or inspecting this product, please make sure
you have read this manual and the explanations of how procedures are carried out,
and make sure the product is used correctly.
This manual uses two safety standard levels: “WARNING” and “CAUTION”.
WARNING
Erroneous handling of an item marked with this label can cause fatal or critical
injury to the user.
w If this product is used in applications where accidents involving bodily
injury and/or significant damage may be conceivable, measures should
be taken to ensure adequate safety, such as the use of duplicate safety
mechanisms.
w The functions of the GT main unit should not be used to design systems
which may pose a threat to human life or which may cause severe injury
or damage. Designs should include safety mechanisms for use in the
event that switch functions do not function correctly.
w Do not use this product in an environment where combustible gases are
present. This can cause explosion.
w Do not dispose of it by incineration. This can cause it to explode.
CAUTION
Erroneous handling of an item marked with this label can cause injury to the
user, or physical damage to property.
w This product should not be used outside of the stated specifications
ranges for ratings, service life, configuration factors and other
elements. This can cause abnormal generation of heat and smoke.
w The operational force of the touch panel should be kept to 0.98 N or
lower. Operating the touch panel at a higher force could cause damage.
w Never touch terminals while the power supply is on. This can cause
electric shock.
w Never disassemble or alter this product. This can cause electric shock
and smoke generation.

No Preview Available !

How This Manual Is Configured
GT10/GT30 Main Unit
Before Using the GT series
This section describes items that should be confirmed and precautions that should
be observed before the GT series are used.
Chapter 1. Specifications
This chapter contains the names and specifications of the various parts of the GT se-
ries, as well as a table of functions, wiring diagrams, and dimensions.
Chapter 2. Installation and Wiring
This chapter explains how the GT series should be installed and how wiring should be
connected.
Chapter 3. Setup
This chapter describes the setup procedures necessary when using the GT series for
the first time.
Chapter 4. Connecting and Communicating with the PLC
This chapter explains how to connect the GT series to the PLC and the FP series by
Matsushita, and how to set up communications between the units.
Chapter 5. GT10 Configuration Settings
This chapter describes the configuration settings for the GT10, and how they should
be entered.
Chapter 6. GT30 Configuration Settings
This chapter describes the configuration settings for the GT30, and how they should
be entered.
Chapter 7. How the Various Functions Are Used
Functions such as switching GT series screens, backlighting, and buzzer control are
explained here.
Chapter 8. Servicing and Maintenance
This chapter describes servicing and maintenance procedures for the GT series, as
well as how optional items are handled.
Chapter 9. Troubleshooting
This explains what to do if there appears to be something wrong with the GT series,
or an error occurs.
Screen Creation Tool Terminal GTWIN
Before Using Terminal GTWIN
This section contains special precautions that should be read if you are using GTWIN.
Chapter 10. Preparing GTWIN
This section explains how to install GTWIN in the personal computer, how to boot it,
and how to exit it.
ii

No Preview Available !

Table of Contents
How This Manual Is Configured . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii
Part I
GT10, GT30 Main Unit
Before Using the GT10/GT30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GT10/GT30 Usage Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Confirming the Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
GT Series System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Products for the GT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
x
xi
xiii
xvii
xix
xx
Chapter 1 Specifications
1.1 GT10/GT30 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.1 General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.2 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.3 Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.4 Touch Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.5 Memory (1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.6 Memory (2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1.7 Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2 GT10 Names and Functions of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.1 GT10 (front) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.2 GT10 (rear) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2.3 Names and Functions of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3 GT30 Names and Functions of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3.1 GT30 (front) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3.2 GT30 (rear) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3.3 Names and Functions of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4 Internal Wiring Connections for Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4.1 COM. Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4.2 TOOL Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.4.3 Power Supply Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5.1 GT10 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5.2 GT10 Panel Cutout Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5.3 GT30 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.5.4 GT30 Panel Cutout Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2
2
2
2
3
3
3
4
5
5
5
5
7
7
7
7
9
9
9
10
11
11
12
12
13
iii

No Preview Available !

GT10/GT30
Table of Contents
Chapter 2 Installation and Wiring
2.1 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.1 Installation Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.2 GT10 Installation Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1.3 GT30 Installation Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.2 Wiring the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3 Wiring the COM. Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3.1 Wiring Method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.3.2 Precautions Concerning Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
16
17
19
21
23
24
24
Chapter 3 Setup
3.1 Setup Procedure for the GT10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.2 Setting the Basic Communication Area, GT10 and PLC . . . . . . . . . . . . . . . .
3.2.1 What is the Basic Communication Area? . . . . . . . . . . . . . . . . . . . . .
3.2.2 GT10 Basic Communication Area Map . . . . . . . . . . . . . . . . . . . . . . .
3.3 Setup Procedure for the GT30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4 Setting the Basic Communication Area, GT30 and PLC . . . . . . . . . . . . . . . .
3.4.1 What is the Basic Communication Area? . . . . . . . . . . . . . . . . . . . . .
3.4.2 GT30 Basic Communication Area Map . . . . . . . . . . . . . . . . . . . . . . .
26
29
29
30
34
37
37
38
Chapter 4 Connecting and Communicating with the PLC
4.1 Connecting the FPSigma . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1.1 Connecting to the COM. Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1.2 Connecting to the TOOL Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2 Connecting the FP0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2.1 Connecting to the COM. Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2.2 Connecting to the TOOL Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3 Connecting the FP1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.3.1 Connecting to the COM. Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4 Connecting the FP2/FP2SH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4.1 Connecting to the COM. Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.4.2 Connecting to the TOOL Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.5 Connecting the FP2/FP2SH CCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.6 Connecting the FP10SH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.6.1 Connecting to the COM. Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.6.2 Connecting to the TOOL Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.7 Connecting the FP10SH/FP3 CCU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
42
42
43
45
45
46
48
48
49
49
50
51
52
52
53
55
iv