A036QN02-V0.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 A036QN02-V0 데이타시트 다운로드

No Preview Available !

Doc. Version
Tota l P ag es
Date
0.1
30
2005/09/08
Product Specification
3.6COLOR TFT-LCD MODULE
MODEL NAME: A036QN02 V0
<>Preliminary Specification
< >Final Specification
© 2005 AU Optronics
All Rights Reserved.
DO NOT COPY
Note: The content of this specification is subject to change.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

Version:
Page:
0.1
1/30
Version Revise Date
0 22/Jul/2005
0.1 08/Sep/2005
Page
Record of Revision
Content
First draft.
3
6-7
9-13
15-16
17
18
20
21
A036QN02 V0 only support CCIR-656, and serial 8bit. RGB
Modify I/O descrption
Modify register default value
Correct application circuit
Delete Note 2 of 3.5.1
Correct 3.5.1.3 (a) figure, and delete (b).
Add item “Vsync to 1st active line” of 3.5.2.1
Add “3-wire serial communication AC timing” figure
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

Contents
Version:
Page:
0.1
2/30
GENERAL DESCRIPTION
FEATURES
1. GENERAL INFORMATION
2. ELECTRICAL SPECIFICATIONS
2.1 FPC PIN ASSIGNMENT
2.2 ABSOLUTE MAXIMUM RATINGS
3. ELECTRICAL CHARACTERISTICS
3.1 TFT- LCD TYPICAL OPERATION CONDITION
3.2 REGISTER INFORMATION
3.2.1 REGISTER SETTING
3.3 BACKLIGHT DRIVING CONDITIONS
3.4 SUGGESTED APPLICATION CIRCUIT
3.4.1 SUGGESTED APPLICATION CIRCUIT
3.4.2 APPLICATION CIRCUIT WITH USING EXTERNAL LED POWER SOURCE
3.5 AC TIMING
3.5.1 TIMING DIAGRAM
3.5.2 TIMING CONDITION
3.6 POWER ON/OFF SEQUENCE
3.6.1 ENTERNAL AVDD
3.6.2 EXTERNAL AVDD
5. ABSOLUTE RATINGS OF AMBIENT ENVIRONMENT
6. PACKING FORM
3
3
4
6
6
8
8
8
9
9
13
15
15
16
17
17
20
23
23
25
29
30
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

Version:
Page:
0.1
3/30
General Description
A036QN02 V0 is a amorphous transmissive type TFT (Thin Film Transistor) LCD (Liquid
crystal Display). This model is composed of TFT-LCD, drive IC, FPC (flexible printed circuit),
and backlight unit.
Features
3.6-inch display size
QVGA resolution and stripe dot arrangement
Premium SIA (Smart Integration Advance). Support below functions
Video brightness adjustable
Video contrast adjustable
Backlight current adjustable
Gamma adjustable
Hue adjustable
Built in timing controller and two DC-DC controller
Single 3.3V power supply
Standby mode supported
VCOM amplitude selected
3-wire register setting
Low power consumption
Various interface support:
CCIR-656;
Serial 8-bit RGB
NTSC and PAL standard supported
2-in-1 FPC
Wide viewing angle
Slim 3.22mm thickness design
Green design
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

Version:
Page:
0.1
4/30
1. General Information
NO. Item Unit
1
Display Resolution
dot
2
Active Area
mm
3
Screen Size
inch
4
Dot Pitch
mm
5 Color Configuration --
6 Color Depth --
7
Overall Dimension
mm
8 Weight g
9 Panel surface treatment --
10 Display Mode
--
Note 1: Below figure shows dot stripe arrangement.
Specification
Remark
960(H)×240(V)
72.96(H)×54.72(V)
3.59(Diagonal)
0.076(H)×0.228(V)
R. G. B. Stripe
Note 1
16.7M Colors
Note 2
84.55(H) × 65.5(V) × 3.22(T) Note 3
TBD (Typical)
Anti-Glare
Normally White
Note 2: The full color display depends on 8-bit data signal (pin13~36).
Note 3: Not include FPC. Refer next page to get further information.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.