A040FL01-V2.pdf 데이터시트 (총 29 페이지) - 파일 다운로드 A040FL01-V2 데이타시트 다운로드

No Preview Available !

Doc. Version
To t al P a ge s
Date
0.1
29
2006/11/06
Product Specification
4.0COLOR TFT-LCD MODULE
MODEL NAME: A040FL01 V2
<>Preliminary Specification
< > Final Specification
© 2006 AU Optronics
All Rights Reserved.
DO NOT COPY
Note: The content of this specification is subject to change.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

Version Revise Date
0 02/Sep/2006
0.1 06/Nov/2006
Page
Record of Revision
Content
First draft.
14 Update TBD value of 3.4.2.1 Timing Parameter.
17 Add 3.5.3 Low-voltadge set.
20 Uodate D5, D6 setting of R0.
23 Update contrast ratio and brightness spec.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

Versi on:
Page:
0.1
3/29
Contents
GENERAL DESCRIPTION
FEATURES
1. GENERAL INFORMATION
2. ELECTRICAL SPECIFICATIONS
2.1 FPC PIN ASSIGNMENT
2.2 ABSOLUTE MAXIMUM RATINGS
3. ELECTRICAL CHARACTERISTICS
3.1 TFT- LCD TYPICAL OPERATION CONDITION
3.2 BACKLIGHT DRIVING CONDITIONS
3.3 SUGGESTED APPLICATION CIRCUIT
3.3.1 SUGGESTED APPLICATION CIRCUIT (NOT USE SPI CONTROL)
3.3.2 SUGGESTED APPLICATION CIRCUIT (USE SPI CONTROL)
3.4 AC TIMING
3.4.1 TIMING DIAGRAM
3.4.2 TIMING CONDITION
3.5 POWER ON/OFF SEQUENCE
3.5.1 POWER-ON (DISPLAY ON; STANDBY DISABLING)
3.5.2 POWER-OFF (DISPLAY OFF; STANDBY ENABLING)
3.5.3 LOW-VOLTAGE RESET
3.6 SERIAL CONTROL SETTING
3.6.1 INPUT TIMING SPECIFICATIONS (REFER TO FIG. 1)
3.6.2 SERIAL SETTING TABLE
4. OPTICAL SPECIFICATION
5. TOUCH SCREEN PANEL SPECIFICATIONS
5.1 FPC PIN ASSIGNMENT
5.2 ELECTRICAL CHARACTERISTICS
5.3 MECHANICAL CHARACTERISTICS
5.4 LIFE TEST CONDITION
5.5 ATTENTION
6. ABSOLUTE RATINGS OF AMBIENT ENVIRONMENT
7. PACKING FORM
4
4
5
7
7
9
9
9
10
11
11
12
13
13
14
14
15
16
17
18
18
19
23
25
25
25
26
26
27
28
29
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

Versi on:
Page:
0.1
4/29
General Description
A040FL01 V2 is a color TFT (Thin Film Transistor) LCD (Liquid crystal Display). This
model is composed of TFT-LCD, drive IC, FPC (flexible printed circuit), backlight unit, and
Touch Panel.
Features
l 4-inch display size
l QQHDTV resolution and wide aspect ratio
l 16.7M colors
l System Integration
Timing controller
Charge pump for VGH, VGL
2-in-1 FPC
l SYNC + DE input mode
l Parallel digital 8-bit data interface
l ATR-MVA (Advanced TRansflective Multi-domain Vertical Alignment)
Wide view angle
No Gray Scale Inverison
High contrast ratio
l Touch Screen. Surface coating: anti-fingerprint , anti-glare, hardcoating
l VCOM, brightness, contrast control by SPI register
l Green design
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.

No Preview Available !

Versi on:
Page:
0.1
5/29
1. General Information
NO. Item Unit
1
Display Resolution
dot
2
Active Area
mm
3
Screen Size
inch
4
Dot Pitch
mm
5 Color Configuration --
6 Color Depth --
7
Overall Dimension
mm
8 Weight g
Touch Panel
9 --
surface treatment
10 Display Mode
--
Note 1: Below figure shows dot stripe arrangement.
Specification
480RGB(H)×272(V)
87.84(H)×49.776(V)
4.0(Diagonal)
0.061(H)×0.183(V)
R. G. B. Stripe
16.7M Colors
98.3(H) × 62.6(V) × 4.85(T)
50 (Typical)
Hard Coating 3H
Anti-Glare, Anti-fingerprint
Normally Black
Remark
Note 1
Note 2
Note 3
Note 2: The full color display depends on 8-bit data signal (pin5~28).
Note 3: Not include FPC. Refer next page to get further information.
.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.