AA104XD12.pdf 데이터시트 (총 25 페이지) - 파일 다운로드 AA104XD12 데이타시트 다운로드

No Preview Available !

Preliminary
TENTATIVE
All information in this technical data sheet is tentative
and subject to change without notice.
10.4” XGA
TECHNICAL SPECIFICATION
AA104XD12
MITSUBISHI ELECTRIC Corp.
MITSUBISHI Confidential
(1/25)
Date: Jul.2,’09
AA104XD12_02_00

No Preview Available !

CONTENTS
No. Item
-- COVER
-- CONTENTS
1 APPLICATION
2 OVERVIEW
3 ABSOLUTE MAXIMUM RATINGS
4 ELECTRICAL CHARACTERISTICS
5 INTERFACE PIN CONNECTION
6 INTERFACE TIMING
7 BLOCK DIAGRAM
8 MECHANICAL SPECIFICATION
9 OPTICAL CHARACTERISTICS
10 RELIABILITY TEST CONDITION
11 OTHER FEATURE
12 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
Page
1
2
3
4
5
5, 6
7, 8, 9
10, 11, 12, 13, 14
15
16, 17
18, 19, 20
21
22
23, 24, 25
MITSUBISHI Confidential
(2/25)
AA104XD12_02_00

No Preview Available !

1. APPLICATION
This specification applies to color TFT-LCD module, AA104XD12.
These specification papers are the proprietary product of Mitsubishi Electric Corporation
(“MITSUBISHI) and include materials protected under copyright of MITSUBISHI. No part of this
document may be reproduced in any form or by any means without the express written permission
of MITSUBISHI.
MITSUBISHI does not assume any liability for infringement of patents, copyrights or other
intellectual property rights of third parties by or arising from use of a product specified in this
document. No license, express, implied or otherwise, is granted under any patents, copyrights or
other intellectual property rights of MITSUBISHI or of others.
MITSUBISHI classifies the usage of the TFT-LCD module as follows. Please confirm the usage
before using the product.
(1) Standard Usage
Computers, office equipment, factory automation equipment, test and measurement
equipment, communications, transportation equipment(automobiles, ships, trains, etc.),
provided, however, that operation is not influenced by TFT-LCD directly.
(2) Special Usage
Medical equipment, safety equipment, transportation equipment, provided, however, that
TFT-LCD is necessary to its operation.
(3) Specific Usage
Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control
systems, life support systems and any other equipment. MITSUBISHI should make a
contract that stipulate apportionment of responsibilities between MITSUBISHI and our
customer.
The product specified in this document is designed for “Standard Usage” unless otherwise specified
in this document. If customers intend to use the product for applications other than those specified
for “Standard Usage”, they should first contact MITSUBISHI sales representative for it's intended
use in writing.
MITSUBISHI has been making continuous effort to improve the reliability of its products.
Customers should implement sufficient reliability design of their application equipments such as
redundant system design, fail-safe functions, anti-failure features.
MITSUBISHI assumes no responsibility for any damage resulting from the use of the product that
does not comply with the instructions and the precautions specified in this document.
Please contact and consult a MITSUBISHI sales representative for any questions regarding this
product.
MITSUBISHI Confidential
(3/25)
AA104XD12_02_00

No Preview Available !

2. OVERVIEW
AA104XD12 is 10.4” color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module
composed of LCD panel, driver ICs, control circuit, and backlight unit.
By applying 6 bit or 8 bit digital data, 1024 × 768, 262k-color or 16.7M-color images are displayed
on the 10.4” diagonal screen. Input power voltage is 3.3 V for LCD driving.
The type of data and control signals are digital and transmitted via LVDS interface per Typ. 65
MHz clock cycle.
Driver circuit for LED backlight is not included in this module. General specifications are
summarized in the following table:
ITEM
Display Area (mm)
Number of Dots
Pixel Pitch (mm)
Color Pixel Arrangement
Display Mode
Number of Color
Luminance (cd/m2)
Wide Viewing Angle Technology
Viewing Angle (CR 10)
Surface Treatment
Electrical Interface
Optimum Viewing Angle (Contrast ratio)
Module Size (mm)
Module Mass (g)
Backlight Unit
SPECIFICATION
210.4 (H) × 157.8 (V)
(10.4-inch diagonal)
1024 × 3 (H) × 768 (V)
0.2055 (H) × 0.2055 (V)
RGB vertical stripe
Normally white TN
262k(6 bit/color) 16.7M(8 bit/color)
1000
Optical Compensation Film
80~80°(H) 65~65°(V)
Anti-glare and hard-coating 3H
LVDS
6 o’clock
230.0 (W) × 180.2 (H) × 10.5 (D)
520
LED, edge-light, replaceable
Characteristic value without any note is typical value.
MITSUBISHI Confidential
(4/25)
AA104XD12_02_00

No Preview Available !

3. ABSOLUTE MAXIMUM RATINGS
ITEM
SYMBOL
MIN.
MAX
UNIT
Power Supply Voltage for LCD
VCC
0
4.0 V
Logic Input Voltage
VI
0.3 VCC+0.3
V
Backlight (LED) Current
IF 0 180 mA
Operation Temperature (Panel)
Note 1,2)
Top(Panel)
30
80
°C
Operation Temperature (Ambient) Note 2)
Top(Ambient)
30
80
°C
Storage Temperature Note 2)
Tstg 30 80 °C
[Note]
1) Measured at the center of active area and at the center of panel back surface
2) Top,Tstg 40°C : 90%RH max. without condensation
Top,Tstg > 40°C : Absolute humidity shall be less than the value of 90%RH at 40°C without
condensation.
4. ELECTRICAL CHARACTERISTICS
(1) TFT-LCD
ITEM
SYMBOL MIN.
Ambient temperature: Ta = 25
TYP. MAX. UNIT Remarks
Power Supply Voltages for LCD
Power Supply Currents for LCD
Permissive Input Ripple Voltage
Logic Input Voltage
High
Low
VCC 3.0 3.3 3.6 V
*1)
ICC -- 440 800 mA *2)
VRP
--
-- 100 mVp-p VCC = +3.3 V
VIH 2.4
--
VCC
V MODE, SC
VIL 0
-- 0.8 V MODE, SC
*1) Power and signals sequence:
t1 10ms
0 < t2 50ms
0 < t3 50ms
200ms t4
200ms t5
0 t6
LCD Power Supply
Logic Signal
0.9VCC
0.1VCC
VCC
data
0.9VCC
0.1VCC 0.1VCC
t1 t2
t3 t4
Backlight Power Supply
t5 t6
data: RGB DATA, DCLK, DENA, MODE, SC
MITSUBISHI Confidential
(5/25)
AA104XD12_02_00