T-55532D104J-LW-A-AEN.pdf 데이터시트 (총 25 페이지) - 파일 다운로드 T-55532D104J-LW-A-AEN 데이타시트 다운로드

No Preview Available !

TENTATIVE
All information in this technical data sheet is tentative
and subject to change without notice.
Preliminary
10.4” VGA
TECHNICAL SPECIFICATION
T-55532D104J-LW-A-AEN
OPTREX CORPORATION
OPTREX Confidential
(1/25)
Date: Jul.8,’11
T-55532D104J-LW-A-AEN

No Preview Available !

CONTENTS
No. Item
-- COVER
-- CONTENTS
1 APPLICATION
2 OVERVIEW
3 ABSOLUTE MAXIMUM RATINGS
4 ELECTRICAL CHARACTERISTICS
5 INTERFACE PIN CONNECTION
6 INTERFACE TIMING
7 BLOCK DIAGRAM
8 MECHANICAL SPECIFICATION
9 OPTICAL CHARACTERISTICS
10 RELIABILITY TEST CONDITION
11 OTHER FEATURE
12 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
Page
1
2
3
4
5
5, 6, 7
8, 9
10, 11, 12, 13, 14
15
16, 17
18, 19, 20
21
22
23, 24, 25
OPTREX Confidential
(2/25)
T-55532D104J-LW-A-AEN

No Preview Available !

1. APPLICATION
This specification applies to color TFT-LCD module, T-55532D104J-LW-A-AEN.
These specification papers are the proprietary product of OPTREX CORPORATION (“OPTREX) and
include materials protected under copyright of OPTREX. No part of this document may be
reproduced in any form or by any means without the express written permission of OPTREX.
OPTREX does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a product specified in this document. No
license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual
property rights of OPTREX or of others.
OPTREX classifies the usage of the TFT-LCD module as follows. Please confirm the usage before
using the product.
(1) Standard Usage
Computers, office equipment, factory automation equipment, test and measurement
equipment, communications, transportation equipment(automobiles, ships, trains, etc.),
provided, however, that operation is not influenced by TFT-LCD directly.
(2) Special Usage
Medical equipment, safety equipment, transportation equipment, provided, however, that
TFT-LCD is necessary to its operation.
(3) Specific Usage
Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control
systems, life support systems and any other equipment. OPTREX should make a contract
that stipulate apportionment of responsibilities between OPTREX and our customer.
The product specified in this document is designed for “Standard Usage” unless otherwise specified
in this document. If customers intend to use the product for applications other than those specified
for “Standard Usage”, they should first contact OPTREX sales representative for it's intended use in
writing.
OPTREX has been making continuous effort to improve the reliability of its products. Customers
should implement sufficient reliability design of their application equipments such as redundant
system design, fail-safe functions, anti-failure features.
OPTREX assumes no responsibility for any damage resulting from the use of the product that does
not comply with the instructions and the precautions specified in this document.
Please contact and consult a OPTREX sales representative for any questions regarding this product.
OPTREX Confidential
(3/25)
T-55532D104J-LW-A-AEN

No Preview Available !

2. OVERVIEW
T-55532D104J-LW-A-AEN is 10.4” color TFT-LCD (Thin Film Transistor Liquid Crystal Display)
module composed of LCD panel, driver ICs, control circuit, LED driver and backlight unit.
By applying 6 bit or 8 bit digital data, 640 480, 262k-color or 16.7M-color images are displayed on
the 10.4” diagonal screen. Input power voltages are 3.3 V for LCD driving and 12.0 V for backlight
unit. The type of data and control signals are digital and transmitted via LVDS interface per Typ.
25 MHz clock cycle.
General specifications are summarized in the following table:
ITEM
Display Area (mm)
Number of Dots
Pixel Pitch (mm)
Color Pixel Arrangement
Display Mode
Number of Color
Luminance (cd/m2)
Viewing Angle (CR 10)
Surface Treatment
Electrical Interface
Viewing Direction
Module Size (mm)
Module Mass (g)
Backlight Unit
SPECIFICATION
211.2 (H) 158.4 (V)
(10.4-inch diagonal)
640 3 (H) 480 (V)
0.33 (H) 0.33 (V)
RGB vertical stripe
Normally white
262k(6 bit/color), 16.7M(8 bit/color)
800
7070(H), 6565(V)
Anti-glare and hard-coating 3H
LVDS (6 bit/8 bit)
Higher Contrast ratio: 6 o'clock
Less gray scale reversal: 12 o'clock
230.0 (W) 180.2 (H) 9.5 (D)
TBD
LED, edge-light, Unreplaceable
Characteristic value without any note is typical value.
OPTREX Confidential
(4/25)
T-55532D104J-LW-A-AEN

No Preview Available !

3. ABSOLUTE MAXIMUM RATINGS
ITEM
SYMBOL
MIN.
MAX.
UNIT
Power Supply Voltage for LCD
VCC
0.3
4.0
V
Logic Input Voltage
VI
0.3 VCC+0.3
V
Backlight Power Supply Input Voltage
VL
(0.3)
(14.0)
V
Backlight ON-OFF
Light Dimming Control (PWM) Input
Voltage
Operation Temperature (Panel)
Note 1,2)
BLEN
V PDIM
Top(Panel)
(0.3)
(0.3)
20
(VL)
(VL)
70
V
V
°C
Operation Temperature (Ambient) Note 2)
Top(Ambient)
20
70
°C
Storage Temperature
Note 2)
Tstg
20
80
°C
[Note]
1) Measured at the center of active area and at the center of panel back surface
2) Top,Tstg 40C : 90%RH max. without condensation
Top,Tstg > 40C : Absolute humidity shall be less than the value of 90%RH at 40C without
condensation.
4. ELECTRICAL CHARACTERISTICS
(1) TFT-LCD
ITEM
SYMBOL MIN.
TYP.
Ambient temperature: Ta = 25°C
MAX. UNIT
Remarks
Power Supply Voltages for LCD
VCC
3.0
3.3
3.6
V
*1)
Power Supply Currents for LCD
ICC
-- 250TBD
mA
*2)
Permissive Input Ripple Voltage VRP
--
-- 100 mVp-p VCC = +3.3V
Logic Input Voltage
High
Low
VIH 0.8VCC --
VCC
V
VIL 0 -- 0.2VCC V
MODE, SC
MODE, SC
*1) Power and signals sequence:
t1 10 ms
0 < t2 50 ms
0 < t3 50 ms
200 ms t4
200 ms t5
0 t6
LCD Power Supply
0.9VCC
Logic Signal
0.1VCC
VCC
data
0.9VCC
0.1VCC 0.1VCC
t1 t2
t3 t4
Backlight Power Supply
t5 t6
data: RGB DATA, DCLK, DENA, MODE, SC
OPTREX Confidential
(5/25)
T-55532D104J-LW-A-AEN