LA5756.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 LA5756 데이타시트 다운로드

No Preview Available !

Ordering number : ENA1438B
LA5756
Monolithic Linear IC
Separately-excited Step-down
Switching Regulator (Variable Type)
Overview
The LA5756 is a separately-excited step-down switching regulator (variable type).
Features
Output smoothing condenser can use a Low ESR condenser for the reliability improvement
High efficiency
Four external parts
Time-base generator (80kHz) incorporated
Current limiter incorporated
Thermal shutdown circuit incorporated
Soft start circuit incorporated
Specifications
Maximum Ratings at Ta = 25°C
Parameter
Input voltage
Output current
SW pin application reverse
Allowable power dissipation
Operating temperature
Storage temperature
Symbol
VIN max
IO max
VSW
Pd max1
Pd max2
Topr
Tstg
Conditions
Infinite heat sink.
No heat sink.
Ratings
34
3.5
-1
7.5
1.75
-30 to +125
-40 to +150
Unit
V
A
V
W
W
°C
°C
Recommended Operating Conditions at Ta = 25°C
Parameter
Input voltage range
Symbol
VIN
Conditions
Ratings
4.5 to 32
Unit
V
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment (home appliances, AV equipment,
communication device, office equipment, industrial equipment etc.). The products mentioned herein shall not be
intended for use for any "special application" (medical equipment whose purpose is to sustain life, aerospace
instrument, nuclear control device, burning appliances, transportation machine, traffic signal system, safety
equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives in case
of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any guarantee
thereof. If you should intend to use our products for applications outside the standard applications of our
customer who is considering such use and/or outside the scope of our intended standard applications, please
consult with us prior to the intended use. If there is no consultation or inquiry before the intended use, our
customer shall be solely responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
62409 SY 20090611-S00001 / 41509 MS / 40809 MS 20090326-S00003 No.A1438-1/4

No Preview Available !

LA5756
Electrical Characteristics at Ta = 25°C, VO = 3.3V
Parameter
Symbol
Conditions
Reference voltage
Efficiency
VOS
η
Switching frequency
f
Line regulation
Load regulation
Output voltage temperature coefficient
Ripple attenuation factor
ΔVOLINE
ΔVOLOAD
ΔVO/ΔTa
RREJ
Current limiter operating voltage
IS
Thermal shutdown operating temperature TSD
Thermal shutdown hysteresis width
ΔTSD
* Designed target value: No measurement made.
VIN = 15V, IO = 1.0A
VIN= 8 to 20V, IO=1.0A
VIN = 15V, IO = 0.5 to 1.5A
Designed target value*
f = 100 to 120Hz
VIN = 15V
Designed target value*
Designed target value*
min
1.235
60
4.2
Ratings
typ
1.26
78
80
40
10
±0.5
45
165
15
max
1.285
100
100
30
Unit
V
%
kHz
mV
mV
mV/°C
dB
A
°C
°C
Package Dimensions
unit : mm (typ)
3376
10.4 MAX
3.6 10.0
4.5
1.3
0.9
12 5
(1.6) 1.7
0.8
0.4
3.15
7.05
Pd max -- Ta
10.0
8.0 100×100×1.5mm3
7.5
Infinite heat sink θjc=5°C
6.0 50×50×1.5mm3
5.6
4.0 30×30×1.5mm3
3.3
2.0 No heat sink
1.75
Al heat
sink
mounting
torque
39Ncm
silicone
grease
applied
0
-30 -20
0 20 40 60 80 100 120 140 160
Ambient temperature, Ta -- °C MSG07021
SANYO : 220-5HMDB
Pin Assignment
(1)VIN (2)SWOUT (3)GND (4)VOS (5)SS
No.A1438-2/4

No Preview Available !

Block Diagram
LA5756
VIN 1
Constnt
Current
Circuit
Reg.
OSC
OCP
RESET
DRIVE
2 SWOUT
ON/OFF Comp.
0.4V
Comp.
TSD
Amp.
VREF
4 VOS
5
SS
Application Circuit Example
VIN
3
GND
SWOUT
L1
LA5756
C1
D1 C2
SS GND
C3
VOS
R2
R1
Notes: C3 is for the soft start function. Delete C3 and keep the SS pin open when the soft function is not necessary.
Description of Functional Settings
1. Calculation equation to set the output voltage
This IC controls the switching output so that the VOS pin voltage becomes 1.26V (typ).
The equation to set the output voltage is as follows:
VO =
1+
R2
R1
× 1.26V(typ)
The VOS pin has the inrush current of 1μA (typ). Therefore, the error becomes larger when R1 and R2 resistance
values are large.
No.A1438-3/4

No Preview Available !

LA5756
2. Start delay function
The SS pin has the internally-connected 10μA (typ) constant-current supply. When the voltage of SS pin exceeds
the threshold voltage, the regulator starts operation. As the threshold is 0.62V(typ), the start delay time can be
calculated as follows:
ex. For setting at 1μF
Td
=
C
×
i
V
=
1μ × 0.4
10μ
= 40 msec
Timing Chart
VIN
SWOUT
VOUT
Td Tss
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed
for volume production.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellctual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of June, 2009. Specifications and information herein are subject
to change without notice.
PS No.A1438-4/4