G070VTN01.0.pdf 데이터시트 (총 25 페이지) - 파일 다운로드 G070VTN01.0 데이타시트 다운로드

No Preview Available !

Preliminary Specifications
Final Specifications
Module
Model Name
7.0 Inch Color TFT-LCD
G070VTN01.0
G070VTN01.0
Customer
Date
Approved by
Date
Checked &
Approved by
Note: This Specification is subject to change
without notice.
Grace Hung
2013/12/02
Prepared by
Yilan Hsu
2013/12/02
Audio-Video Business Unit /
AU Optronics corporation
Data M odul AG - www.data-modul.com
G070VTN01.0 rev. 1.0
1/25

No Preview Available !

G070VTN01.0
Contents
1. Operating Precautions.....................................................................................5
2. General Description .........................................................................................6
2.1 Display Characteristics...........................................................................................................6
2.2 Optical Characteristics ...........................................................................................................7
3. Functional Block Diagram .............................................................................10
4. Absolute Maximum Ratings ..........................................................................11
4.1 Absolute Ratings of TFT LCD Module ................................................................................. 11
5. Electrical Characteristics ..............................................................................12
5.1 TFT LCD Module ..................................................................................................................12
5.2 Backlight Unit........................................................................................................................14
6. Signal Characteristic .....................................................................................15
6.1 Pixel Format Image ..............................................................................................................15
6.2 Signal Description ................................................................................................................16
6.4 The Input Data Format .........................................................................................................18
6.5 Interface Timing ....................................................................................................................19
6.6 Power ON/OFF Sequence ...................................................................................................20
7. Connector & Pin Assignment ........................................................................21
7.1 TFT LCD Signal (CN1): LVDS Connector ...........................................................................21
7.2 LED Backlight Unit: LED Connector ....................................................................................21
8. Reliability Test Criteria ..................................................................................22
9. Mechanical Characteristics ...........................................................................23
9.1 LCM Outline Dimension .......................................................................................................23
10. Label and Packaging....................................................................................24
10.1 Shipping Label (on the rear side of TFT-LCD display) ......................................................24
10.2 Carton Package .................................................................................................................24
11 Safety.............................................................................................................25
11.1 Sharp Edge Requirements.................................................................................................25
11.2 Materials .............................................................................................................................25
11.3 Capacitors...........................................................................................................................25
11.4 National Test Lab Requirement..........................................................................................25
Data M odul AG - www.data-modul.com
G070VTN01.0 rev. 1.0
2/25

No Preview Available !

Record of Revision
Version Date
V 0.2
Page
Old description
20 LED Backlight Unit:
V 0.3
V 0.4
22,23 Original 2D outline
21 LED Cable Maker changed
20
G070VTN01.0
New Description
LED Backlight Unit:
Updated 2D outline including:
1. New 2D outline with mounting holes
2. New LED cable length defined
JST connector chosen
Note : Control signal indicates UD, LR and
SEL68.
V 0.5
16 Pin3 is revised and named by GND.
17 The UD/RL pin setting should follow the The RL pin setting should follow the power
power on sequence in Section 6.6.
on sequence in Section 6.6.
Fig. 1 Normal scan (Pin3, UD = Low or
NC ; Pin4, RL = Low or NC)
Fig. 2 Reverse scan (Pin3, UD = Low or
NC ; Pin4, RL = High)
Fig. 3 Reverse scan (Pin3, UD = High ;
Pin4, RL = Low or NC)
Fig. 4 Reverse scan (Pin3, UD = High ;
Pin4, RL = High)
Fig. 1 Normal scan (Pin4, RL = Low or NC)
Fig. 2 Reverse scan (Pin4, RL = High)
Data M odul AG - www.data-modul.com
G070VTN01.0 rev. 1.0
3/25

No Preview Available !

G070VTN01.0
Version Date
V0.5
Page
Old description
11 Absolute Ratings of Environment
New Description
Remove Absolute Ratings of
Environment
19 .
Timing table and diagram update
V0.6
20
Note : Control signal indicates UD, LR and Note : Control signal indicates LR and
SEL68
SEL68
Pin3 is revised and named by GND.
21
7 WeightTBD
23 Mechanical CharacteristicsX0
Color / Chromaticity Coordinates: TBD
7
Weight180
Mechanical CharacteristicsX1
Fill in color coordinate value:
21
Connector Model Number (Contact) :
JST SSH003T-P0.2
Mating Model Number (Housing) : JST
SHR-02V-BK-B-HF
22 Reliability Test Criteria
Connector Model Number (Contact) :
ENTERY 3802K-Q02N-01L
Mating Model Number (Housing) : ENTERY
H201K-P02N-02B
Updated Reliability Test Criteria
V1.0
23 Mechanical CharacteristicsX1
23 Mechanical CharacteristicsX3
Mechanical CharacteristicsX3
Mechanical CharacterisGtic0s70VXTN501.0 rev. 1.0
Data M odul AG - www.data-modul.com
4/25

No Preview Available !

G070VTN01.0
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard
surface.
6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling
TFT-LCD Module.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken out
from the container, do not press the center of the LED Reflector edge. Instead, press at the
far ends of the LED Reflector edge softly. Otherwise the TFT Module may be damaged.
10)At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example), do
not twist nor bend the TFT Module even momentary. At designing the enclosure, it should be
taken into consideration that no bending/twisting forces are applied to the TFT Module from
outside. Otherwise the TFT Module may be damaged.
12)Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
13)Severe temperature condition may result in different luminance, response time.
14)Continuous operating TFT-LCD Module under high temperature environment may accelerate
LED light bar exhaustion and reduce luminance dramatically.
15)The data on this specification sheet is applicable when LCD module is placed in landscape
position.
16)Continuous displaying fixed pattern may induce image sticking. It is recommended to use
screen saver or shuffle content periodically if fixed pattern is displayed on the scree n.
Data M odul AG - www.data-modul.com
G070VTN01.0 rev. 1.0
5/25