Global LCD Panel Exchange Center
This 15.0 XGA TFT-LCD module specification are the proprietary product of SHARP
CORPORATION and Backlight module made by. Do not reproduce or cause any third party to
reproduce them in any form or by any means, electronic or mechanical, for any purpose, in whole or in
part, without the express written permission of SHARP.
The device listed in this technical literature was designed and manufactured for use in OA equipment.
In case of using the device for applications such as control and safety equipment for transportation
(aircraft, trains, automobiles, etc. ), rescue and security equipment and various safety related equipment
which require higher reliability and safety, take into consideration that appropriate measures such as
fail-safe functions and redundant system design should be taken.
Do not use the device for equipment that requires an extreme level of reliability, such as aerospace
applications, telecommunication equipment(trunk lines), nuclear power control equipment and medical
or other equipment for life support.
We assumes no responsibility for any damage resulting from the use of the device which does not
comply with the instructions and the precautions specified in these specification sheets.
This module is a color active matrix LCD module incorporating amorphous silicon TFT (Thin Film
Transistor). It is composed of a color TFT-LCD panel, driver ICs, control circuit, power supply circuit and
a back light unit. Graphics and texts can be displayed on a 102 RG 768 dots panel with about 16
million colors by using LVDS (Low Voltage Differential Signaling) and supplying +3.3V DC supply
voltages for TFT-LCD panel driving and supply voltage for backlight.
3. Mechanical Specifications
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com