D1411A.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 D1411A 데이타시트 다운로드

No Preview Available !

TOSHIBA Transistor Silicon NPN Triple Diffused Type
2SD1411A
High-Current Switching Applications
Power Amplifier Applications
2SD1411A
Unit: mm
Low saturation voltage: VCE (sat) = 0.5 V (max) at IC = 4 A
Complementary to 2SB1018A
Absolute Maximum Ratings (Tc = 25°C)
Characteristics
Symbol
Rating
Unit
Collector-base voltage
VCBO 100 V
Collector-emitter voltage
VCEO 80 V
Emitter-base voltage
VEBO 5 V
Collector current
IC 7 A
Base current
IB 1 A
Collector power
dissipation
Ta = 25°C
Tc = 25°C
PC
2.0
W
30
JEDEC
Junction temperature
Storage temperature range
Tj 150 °C
Tstg
55 to 150
°C
JEITA
TOSHIBA
2-10R1A
Note: Using continuously under heavy loads (e.g. the application of high
temperature/current/voltage and the significant change in
Weight: 1.7 g (typ.)
temperature, etc.) may cause this product to decrease in the
reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are
within the absolute maximum ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report
and estimated failure rate, etc).
1 2006-11-21

No Preview Available !

Electrical Characteristics (Tc = 25°C)
2SD1411A
Characteristics
Collector cut-off current
Emitter cut-off current
Collector-emitter breakdown voltage
DC current gain
Collector-emitter saturation voltage
Base-emitter saturation voltage
Transition frequency
Collector output capacitance
Symbol
Test Condition
ICBO
VCB = 100 V, IE = 0
IEBO
VEB = 5 V, IC = 0
V (BR) CEO IC = 50 mA, IB = 0
hFE (1)
(Note)
VCE = 1 V, IC = 1 A
hFE (2)
VCE (sat)
VCE = 1 V, IC = 4 A
IC = 4 A, IB = 0.4 A
VBE (sat) IC = 4 A, IB = 0.4 A
fT VCE = 4 V, IC = 1 A
Cob VCB = 10 V, IE = 0, f = 1 MHz
Min Typ. Max Unit
― ― 5 μA
― ― 5 μA
80 ― ―
V
70 240
30 ― ―
0.25 0.5
V
0.9 1.4
V
10 MHz
200
pF
Turn-on time
ton
20 μs
Input IB1
Output
0.4
Switching time Storage time
tstg
IB2
Fall time
VCC = 30 V
tf
IB1 = IB2 = 0.3 A, duty cycle 1%
Note: hFE (1) classification O: 70 to 140, Y: 120 to 240
2.5
μs
0.5
Marking
D1411A
Characteristics
indicator
Part No. (or abbreviation code)
Lot No.
A line indicates
lead (Pb)-free package or
lead (Pb)-free finish.
2 2006-11-21

No Preview Available !

IC – VCE
8
160 100
Common emitter
Tc = 25°C
6 80
60
4
40
30
2
IB = 10 mA
0
0
0 2 4 6 8 10
Collector-emitter voltage VCE (V)
VCE – IC
1.2
Common emitter
Tc = 100°C
1.0
0.8 IB = 20 mA
100 200 300
0.6
0.4 400
500
0.2 700 600
0
012345678
Collector current IC (A)
2SD1411A
1.2
1.0
0.8
IB = 30 mA
0.6
0.4
0.2
VCE – IC
Common emitter
Tc = 25°C
60 100 150 200 300 400
500
600
700
0
012345678
Collector current IC (A)
VCE – IC
1.2
Common emitter
Tc = 55°C
1.0
0.8 IB = 30 mA
150 200 300 400
60 100
0.6
0.4
500
0.2 700 600
0
012345678
Collector current IC (A)
hFE – IC
500
Common emitter
300 VCE = 1 V
Tc = 100°C
25
100
50 55
30
10
5
0.03
0.1 0.3 1 3
Collector current IC (A)
10
VCE (sat) – IC
1
Common emitter
0.5 IC/IB = 10
0.3
0.1
0.05
0.03
Tc = 100°C
55
25
0.01
0.03
0.1 0.3 1 3
Collector current IC (A)
10
3 2006-11-21

No Preview Available !

VBE (sat) – IC
10
Common emitter
5 IC/IB = 10
3
1 Tc = 55°C
0.5 25 100
0.3
0.1
0.03
0.1 0.3 1 3
Collector current IC (A)
10
Safe Operating Area
20
IC max (pulsed)*
10
5 IC max
(continuous)
3
DC operation
Tc = 25°C
1
1 ms*
10 ms*
100 ms*
0.5 *: Single nonrepetitive pulse
0.3 Tc = 25°C
Curves must be derated
linearly with increase in
temperature.
0.1
1 3 10
VCEO max
30
100
Collector-emitter voltage VCE (V)
2SD1411A
IC – VBE
8
Common emitter
VCE = 1 V
6
4
2 Tc = 100°C
55
25
0
0 0.4 0.8 1.2 1.6
Base-emitter voltage VBE (V)
2.0
4 2006-11-21

No Preview Available !

2SD1411A
RESTRICTIONS ON PRODUCT USE
The information contained herein is subject to change without notice.
20070701-EN
TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
5 2006-11-21