N140A1-L02.pdf 데이터시트 (총 27 페이지) - 파일 다운로드 N140A1-L02 데이타시트 다운로드

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
- CONTENTS -
REVISION HISTORY
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL
5.4 COLOR DATA INPUT ASSIGNMENT
5.5 EDID DATA STRUCTURE
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
8. PRECAUTIONS
8.1 ASSEMBLY AND HANDLING PRECAUTIONS
8.2 SAFETY PRECAUTIONS
9. DEFINITION OF LABELS
9.1 CMO MODULE LABEL
9.2 CMO CARTON LABEL
10. PACKAGING
10.1 Packing Specification
10.2 Packing Method
Issued Date: Feb. 21, 2005
Model No.: N140A1 - L02
Approval
2 / 27
Version 3.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Feb. 21, 2005
Model No.: N140A1 - L02
Approval
Version
3.0
3.1
Date
01,13,’05
02,21,’05
REVISION HISTORY
Page
(New)
Section
Description
All All Approval spec was first issued
last Add CCFL cable’s Kapton tape in outline drawing.
3 / 27
Version 3.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Feb. 21, 2005
Model No.: N140A1 - L02
Approval
1. GENERAL DESCRIPTION
1.1 OVERVIEW
N140A1 - L02 is a 14.0” TFT Liquid Crystal Display module with single CCFL Backlight unit and 30 pins
LVDS interface. This module supports 1280 x 768 XGA mode and can display 262,144 colors. The optimum
viewing angle is at 6 o’clock direction. The inverter module for Backlight is not built in.
1.2 FEATURES
- Thin and Light Weight
- XGA (1280 x 768 pixels) resolution
- DE only mode
- 3.3V LVDS (Low Voltage Differential Signaling) interface with 1 pixel/clock
1.3 APPLICATION
- TFT LCD Notebook
1.4 GENERAL SPECIFICATI0NS
Item
Active Area
Bezel Opening Area
Driver Element
Pixel Number
Pixel Pitch
Pixel Arrangement
Display Colors
Transmissive Mode
Surface Treatment
Specification
305.28(H) X 183.168(V)
308.48 (H) x 186.37 (V)
a-si TFT active matrix
1280 x R.G.B. x 768
0.2385 (H) x 0.2385 (V)
RGB vertical stripe
262,144
Normally white
Hard coating (2H), Glare type
Unit
mm
mm
-
pixel
mm
-
color
-
-
Note
(1)
-
-
-
-
-
-
-
1.5 MECHANICAL SPECIFICATIONS
Item
Min.
Typ.
Max.
Unit Note
Horizontal(H)
315.5
320
320.5
mm
Module Size Vertical(V)
198.7
199
199.3
mm (1)
Depth(D)
--
5.2 5.5 mm
Weight
-- 420 435 g -
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions.
4 / 27
Version 3.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Feb. 21, 2005
Model No.: N140A1 - L02
Approval
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Storage Temperature
Operating Ambient Temperature
Shock (Non-Operating)
Vibration (Non-Operating)
Symbol
TST
TOP
SNOP
VNOP
Value
Min. Max.
-20 +60
0 +50
- 200
- 2.0
Note (1) Temperature and relative humidity range is shown in the figure below.
Unit Note
ºC (1)
ºC (1), (2)
G (3), (5)
G (4), (5)
(a) 90 %RH Max. (Ta Љ 40 ºC).
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The ambient temperature means the temperature of panel surface.
Note (3) 2ms, half sine wave, 1 times for ± X, ± Y, ± Z.
Note (4) 10 ~ 500 ~ 10 Hz, Sweep rate 10min, 30min for X, Y, Z. The fixing condition is shown as below:
Side Mount Fixing Screw
gap=2mm
LCD Module
Bracket
Side Mount Fixing Screw
Stage
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid enough
so that the module would not be twisted or bent by the fixture.
Relative Humidity (%RH)
100
90
80
60
2.2 ELECTRICAL ABSOLUTE RATINGS
40
Operating Range
20
5 Storage Range
-40 -20
0 20 40 60 80
Temperature (ºC)
5 / 27
Version 3.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com