N141I1-L08.pdf 데이터시트 (총 28 페이지) - 파일 다운로드 N141I1-L08 데이타시트 다운로드

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Global LCD Panel Exchange Center
www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov 23, 2005
Model No.: N141I1 - L08
Preliminary
- CONTENTS -
REVISION HISTORY
-------------------------------------------------------
1. GENERAL DESCRIPTION
1.1 OVERVIEW
1.2 FEATURES
1.3 APPLICATION
1.4 GENERAL SPECIFICATIONS
1.5 MECHANICAL SPECIFICATIONS
-------------------------------------------------------
2. ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
2.2 ELECTRICAL ABSOLUTE RATINGS
2.2.1 TFT LCD MODULE
2.2.2 BACKLIGHT UNIT
-------------------------------------------------------
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LCD MODULE
3.2 BACKLIGHT UNIT
-------------------------------------------------------
4. BLOCK DIAGRAM
4.1 TFT LCD MODULE
4.2 BACKLIGHT UNIT
-------------------------------------------------------
5. INPUT TERMINAL PIN ASSIGNMENT
5.1 TFT LCD MODULE
5.2 BACKLIGHT UNIT
5.3 TIMING DIAGRAM OF LVDS INPUT SIGNAL
5.4 COLOR DATA INPUT ASSIGNMENT
5.5 EDID DATA STRUCTURE
-------------------------------------------------------
6. INTERFACE TIMING
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
6.2 POWER ON/OFF SEQUENCE
-------------------------------------------------------
7. OPTICAL CHARACTERISTICS
7.1 TEST CONDITIONS
7.2 OPTICAL SPECIFICATIONS
-------------------------------------------------------
8. PRECAUTIONS
8.1 HANDLING PRECAUTIONS
8.2 STORAGE PRECAUTIONS
8.3 OPERATION PRECAUTIONS
-------------------------------------------------------
9. PACKING
9.1 CARTON
9.2 PALLET
-------------------------------------------------------
10. DEFINITION OF LABELS
10.1 CMO MODULE LABEL
10.2 CMO CARTON LABE
-------------------------------------------------------
3
4
5
7
11
12
18
20
24
25
27
2 / 28
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version 1.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov 23, 2005
Model No.: N141I1 - L08
Preliminary
REVISION HISTORY
Version
1.0
1.1
Date
Aug 26,’05
Nov 23,’05
Page
(New)
Section
Description
All All Preliminary specification was first issued.
4 1.5 Update weight spec from 400g typical to 395g typical.
6 2.2.2 Define lamp currency and frequency
7 3.1 Define power supply current at while and black pattern. Update EBL.
9 3.2 Define backlight unit basic parameters
15~17
18
5.5 Update EDID Code
6.1 Update DE signal
20 7.2 Update optical specification
3 / 28
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version 1.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov 23, 2005
Model No.: N141I1 - L08
Preliminary
1 GENERAL DESCRIPTION
1.1OVERVIEW
N141I1 - L08 is a 14.1” TFT Liquid Crystal Display module with single CCFL Backlight unit and 30 pins
LVDS interface. This module supports 1280 x 800 WXGA mode and can display 262,144 colors. The
optimum viewing angle is at 6 o’clock direction. The inverter module for Backlight is not built in.
1.2 FEATURES
- Thin and Light Weight
- WXGA (1280 x 800 pixels) resolution
- DE only mode
- 3.3V LVDS (Low Voltage Differential Signaling) interface with 1 pixel/clock
- RoHS Compliance
1.3 APPLICATION
- TFT LCD Notebook
1.4 GENERAL SPECIFICATI0NS
Item
Active Area
Bezel Opening Area
Driver Element
Pixel Number
Pixel Pitch
Pixel Arrangement
Display Colors
Transmissive Mode
Surface Treatment
Specification
303.36(H) X 189.6(V)
306.76 (H) x 192.8 (V)
a-si TFT active matrix
1280 x R.G.B. x 800
0.237 (H) x 0.237 (V)
RGB vertical stripe
262,144
Normally white
Glare, ReflectionІ2%,3H
Unit
mm
mm
-
pixel
mm
-
color
-
-
Note
(1)
-
-
-
-
-
-
-
1.5 MECHANICAL SPECIFICATIONS
Item
Horizontal(H)
Module Size Vertical(V)
Depth(D)
Weight without inverter
Min.
319
205
--
--
Typ.
319.5
205.5
5.2
395
Max.
320
206
5.5
410
Unit Note
mm
mm (1)
mm
g
Note (1) Please refer to the attached drawings for more information of front and back outline dimensions
4 / 28
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version 1.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
Issued Date: Nov 23, 2005
Model No.: N141I1 - L08
Preliminary
2 ABSOLUTE MAXIMUM RATINGS
2.1 ABSOLUTE RATINGS OF ENVIRONMENT
Item
Symbol
Storage Temperature
Operating Ambient Temperature
Shock (Non-Operating)
Vibration (Non-Operating)
TST
TOP
SNOP
VNOP
Note (1) (a) 90 %RH Max. (Ta Љ 40 ºC).
Value
Min. Max.
-20 +60
0 +50
- 220/2
- 1.5
Unit
ºC
ºC
G/ms
G
(b) Wet-bulb temperature should be 39 ºC Max. (Ta > 40 ºC).
(c) No condensation.
Note (2) The temperature of panel display surface area should be 0 ºC Min. and 60 ºC Max..
Note
(1)
(1), (2)
(3), (5)
(4), (5)
Relative Humidity (%RH)
100
90
80
60
Operating Range
40
20
10 Storage Range
-40 -20
0 20 40 60 80
Temperature (ºC)
Note (3) 1 time for ± X, ± Y, ± Z. for Condition (220G / 2ms) is half Sine Wave,.
Note (4) 10 ~ 500 Hz, Sweep rate 10min, 30min for X, Y, Z
Note (5) At testing Vibration and Shock, the fixture in holding the module has to be hard and rigid
enough so that the module would not be twisted or bent by the fixture.
The fixing condition is shown as below:
At Room Temperature
LCD Module
Side Mount Fixing Screw
Gap=2mm
Bracket
Side Mount Fixing Screw
Stage
5 / 28
The information described in this technical specification is preliminary and it is possible to be changed without prior
notice. Please contact CMO ’s representative while your product design is based on this specification. Version 1.1
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com