DYP-ME007TX.pdf 데이터시트 (총 2 페이지) - 파일 다운로드 DYP-ME007TX 데이타시트 다운로드

No Preview Available !

DYP serial Ultrasonic Sensor
DYP-ME007TX ultrasonic sensor is non-contact
distance measurement module, which
is also compatible with electronic brick.
Output is Serial ports output
It’s designed for easy modular project
usage with industrial performance.
Features
Detecting range: 3cm-4m
Best in 30 degree angle
Electronic brick compatible interface
5VDC power supply
Breadboard friendly
Dual transducer
Arduino library ready
Specifications

No Preview Available !

Supply voltage
5v
Global Current Consumption 15 mA
Ultrasonic Frequency
40k Hz
Maximal Range
400 cm
Minimal Range
3 cm
Resolution
1 cm
Baud rate
9600 n,8,1
Outline Dimension
Serial out format
43x20x15 mm
Practical test of performance,
Best in 30 degree angle
This module in use of single chip will occupy a IO mouth, connect power
supply, module 50ms a location inside each, and from the pin OUT a frame,
including 4 8 bits of data and frame format 0XFF + H_DATA + for: L_DATA +
SUM
1. 0XFF: for a frame to start data for judgment.
2. H_DATA: distance data of high eight.
3. L_DATA: distance data of low 8 bits.
4. SUM: data and, used to come to pass. Its 0XFF H_DATA + + L_DATA =
SUM (only low 8)
Note: H_DATA and L_DATA synthetic 16 data, namely to unit of millimeter
distance value.