B116XW05-V1.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 B116XW05-V1 데이타시트 다운로드

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specification
( V ) Final Specification
Module
Model Name
Note ( )
11.6” (11.56”) HD 16:9 Color TFT-LCD
B116XW05 V1 (0A)
LED Backlight without driving circuit design
Customer
Date
Approved by
Date
Checked &
Approved by
Date
Note: This Specification is subject to change
without notice.
CH Lin
06/30/2011
Prepared by
Date
Jonken Fan
06/30/2011
NBBU Marketing Division
AU Optronics corporation
B116XW05 V1 Document Version : 0.2
1 of 30

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions .............................................................. 4
2. General Description ................................................................ 5
2.1 General Specification ..........................................................................................................................5
2.2 Optical Characteristics ........................................................................................................................6
3. Functional Block Diagram ....................................................... 6
4. Absolute Maximum Ratings..................................................... 6
4.1 Absolute Ratings of TFT LCD Module...............................................................................................6
4.2 Absolute Ratings of Environment .......................................................................................................6
5. Electrical Characteristics......................................................... 6
5.1 TFT LCD Module................................................................................................................................6
5.2 Backlight Unit .....................................................................................................................................6
6. Signal Interface Characteristic................................................ 6
6.1 Pixel Format Image .............................................................................................................................6
6.2 The Input Data Format ........................................................................................................................6
6.3 Integration Interface Requirement....................................... 6
6.4 Interface Timing ..................................................................................................................................6
7. Panel Reliability Test .............................................................. 6
7.1 Vibration Test ......................................................................................................................................6
7.2 Shock Test ...........................................................................................................................................6
7.3 Reliability Test.....................................................................................................................................6
8. Mechanical Characteristics...................................................... 6
8.1 LCM Outline Dimension.....................................................................................................................6
9. Shipping and Package ............................................................. 6
9.1 Shipping Label Format ........................................................................................................................6
9.2 Carton Package....................................................................................................................................6
9.3 Shipping Package of Palletizing Sequence..........................................................................................6
10. Appendix: EDID Description.................................................. 6
B116XW05 V1 Document Version : 0.2
2 of 30

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page
Old description
1 2010/12/03 0.1 All First Edition for Customer
2 2011/04/11 0.2 All First Edition for Customer
3 2011/06/30 0.3 All
New Description
Final Specification
Remark
B116XW05 V1 Document Version : 0.2
3 of 30

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration
or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate
nor tilt the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be
damaged.
12)Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13)Disconnecting power supply before handling LCD modules, it can prevent electric shock,
DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT
module that a LED light bar build in as a light source of back light unit. It can prevent
electronic breakdown.
B116XW05 V1 Document Version : 0.2
4 of 30

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
2. General Description
B116XW05 V1 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel,
a driver circuit, and LED backlight system. The screen format is intended to support the 16:9
HD, 1366(H) x768(V) screen and 262k colors (RGB 6-bits data driver) without LED backlight
driving circuit.
B116XW05 V1 is designed for a display unit of notebook style personal computer and
industrial machine.
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Format
Display Mode
White Luminance (ILED=20mA)
(Note: ILED is LED current)
Luminance Uniformity
Contrast Ratio
Response Time
Nominal Input Voltage VDD
Power Consumption
Weight
Physical Size
Include bracket
Electrical Interface
Glass Thickness
Polarizer
Top
Bottom
Support Color
Unit
[mm]
[mm]
Specifications
11.568”
256.12 x 144.00
1366 x 3(RGB) x 768
[mm] 0.1875(V) x 3 x 0.0625(H) mm
1366 (RGB stripe, H) x 768 (V)
[cd/m2]
[ms]
Normally White
200 typ. (5 points average)
170 min. (5 points average)
1.25 max. (5 points)
600 typ, 500 min.
16 typ / 20 Max
[Volt] +3.3 typ.
[Watt] Logic 1.0 Max
[Grams] 210 max.
[mm]
Length
Width
Thickness
Min.
282.5
166.5
-
1 channel eDP
Typ.
283.0
167.0
-
Max.
283.5
167.5
3.6
[mm]
0.3
Glossy Surface, 4H Hard Coating, EWV
,AG, 40% Haze, EWV
262K colors ( RGB 6-bit )
B116XW05 V1 Document Version : 0.2
5 of 30