B116XW05-V006.pdf 데이터시트 (총 22 페이지) - 파일 다운로드 B116XW05-V006 데이타시트 다운로드

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
( V ) Preliminary Specification
( ) Final Specification
Module
Model Name
Note
11.6” (11.56”) HD 16:9 Color TFT-LCD
B116XW05 V006
Without Backlight and LED driving circuit design
Customer
Date
Approved by
Date
Checked &
Approved by
Date
Ch Lin
05/27/2011
Prepared by
Date
Jonken Fan
05/27/2011
Note: This Specification is subject to change
without notice.
NBBU Marketing Division
AU Optronics corporation
B116XW05 V006 Document Version : 0.1
1 of 22

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions .............................................................. 4
2. General Description................................................................. 5
2.1 General Specification .......................................................................................................................... 5
2.2 Optical Characteristics ........................................................................................................................ 6
3. Functional Block Diagram........................................................ 7
4. Absolute Maximum Ratings .................................................... 8
4.1 Absolute Ratings of TFT LCD Module ............................................................................................... 8
4.2 Absolute Ratings of Environment ....................................................................................................... 8
5. Electrical Characteristics......................................................... 9
5.1 TFT LCD Module................................................................................................................................ 9
6. Signal Interface Characteristic ............................................. 10
6.1 Pixel Format Image ........................................................................................................................... 10
6.2 The Input Data Format...................................................................................................................... 11
6.3 Integration Interface Requirement .................................................................................................... 12
6.4 Interface Timing ................................................................................................................................ 13
6.5 Power ON/OFF Sequence ............................................................................................................. 15
7. Panel Reliability Test ............................................................ 16
7.1 Reliability Test................................................................................................................................... 16
8. Mechanical Characteristics.................................................... 17
8.1 LCM Outline Dimension ................................................................................................................... 17
9. Shipping Label Format .......................................................... 19
10. Appendix: EDID Description ................................................ 19
B116XW05 V006 Document Version : 0.1
2 of 22

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page
Old description
1 2011/05/27 0.1 All First Edition for Customer
New Description
Remark
B116XW05 V006 Document Version : 0.1
3 of 22

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt
the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example),
do not twist nor bend the TFT Module even momentary. At designing the enclosure, it
should be taken into consideration that no bending/twisting forces are applied to the TFT
Module from outside. Otherwise the TFT Module may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
13) Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO
NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module that
a LED light bar build in as a light source of back light unit. It can prevent electronic
breakdown.
B116XW05 V006 Document Version : 0.1
4 of 22

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
2. General Description
B116XW05 V006 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel.
The screen format is intended to support the 16:9 HD, 1366(H) x768(V) screen and 262k colors
(RGB 6-bits data driver) without backlight and LED driving circuit. All input signals are eDP
interface compatible.
B116XW05 V006 is designed for a display unit of notebook style personal computer and industrial
machine.
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Format
Display Mode
Transmittance
Response Time
Nominal Input Voltage VDD
Power Consumption
Weight
Electrical Interface
Glass Thickness
Top polarizer
Bottom polarizer
Support Color
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance
Unit
[mm]
[mm]
Specifications
11.568”
256.12 x 144.00
1366 x 3(RGB) x 768
[mm] 0.1875(V) x 3 x 0.0625(H) mm
1366 (RGB stripe, H) x 768 (V)
Normally White
% 5.3 % typ. / 5.0 % min.
[ms] 16 typ. / 20 Max.
[Volt] +3.3 typ.
[Watt] 1W max. (Logic)
[Grams] 100 max.
1 channel RVDS
[mm]
0.3
Glossy Surface, 3H Hard Coating, WV
ARGef,le4c0t%ionH%aze WV
262K colors ( RGB 6-bit )
[oC] 0 to +50
[oC] -20 to +60
RoHS Compliance
B116XW05 V006 Document Version : 0.1
5 of 22