D121S-L01.pdf 데이터시트 (총 22 페이지) - 파일 다운로드 D121S-L01 데이타시트 다운로드

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
TENTATIVE
All information in this technical data sheet is tentative
and subject to change without notice.
12.1” SVGA
TECHNICAL SPECIFICATION
D006L
D121S-L01
Melco Display Technology Inc.
Date: Jun.19,’06
MDTI Confidential
(1/22)
D121S-L01_02_00
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
CONTENTS
No. Item
-- COVER
-- CONTENTS
1 APPLICATION
2 OVERVIEW
3 ABSOLUTE MAXIMUM RATINGS
4 ELECTRICAL CHARACTERISTICS
5 INTERFACE PIN CONNECTION
6 INTERFACE TIMING
7 BLOCK DIAGRAM
8 MECHANICAL SPECIFICATION
9 OPTICAL CHARACTERISTICS
10 RELIABILITY TEST CONDITION
11 HANDLING PRECAUTIONS FOR TFT-LCD MODULE
Page
1
2
3
4
5
5, 6, 7
8, 9
10, 11, 12, 13
14
15, 16
17, 18
19
20, 21, 22
MDTI Confidential
(2/22)
D121S-L01_02_00
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
1. APPLICATION
This specification applies to color TFT-LCD module, D006L / D121S-L01.
These specification papers are the proprietary product of Melco Display Technology Inc. (“MDTI”)
and include materials protected under copyright of MDTI. No part of this document may be
reproduced in any form or by any means without the express written permission of MDTI.
MDTI does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from use of a product specified in this document. No
license, express, implied or otherwise, is granted under any patents, copyrights or other
intellectual property rights of MDTI or of others.
MDTI classifies the usage of the TFT-LCD module as follows. Please confirm the usage before using
the product.
(1) Standard Usage
Computers, office equipment, factory automation equipment, test and measurement
equipment, communications, transportation equipment(automobiles, ships, trains, etc.),
provided, however, that operation is not influenced by TFT-LCD directly.
(2) Special Usage
Medical equipment, safety equipment, transportation equipment, provided, however, that
TFT-LCD is necessary to its operation.
(3) Specific Usage
Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control
systems, life support systems and any other equipment. MDTI should make a contract
that stipulate apportionment of responsibilities between MDTI and our customer.
The product specified in this document is designed for “Standard Usage” unless otherwise specified
in this document. If customers intend to use the product for applications other than those specified
for “Standard Usage”, they should contact MDTI sales representative in advance.
MDTI has been making continuous effort to improve the reliability of its products. Customers
should implement sufficient reliability design of their application equipments such as redundant
system design, fail-safe functions, anti-failure features.
MDTI assumes no responsibility for any damage resulting from the use of the product that does not
comply with the instructions and the precautions specified in this document.
MDTI Confidential
(3/22)
D121S-L01_02_00
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
2. OVERVIEW
D006L / D121S-L01 is 12.1” color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module
composed of LCD panel, driver ICs, control circuit, and backlight unit.
By applying 6 bit digital data, 800 × 600, 262 K-color images are displayed on the 12.1” diagonal
screen. Input power voltage is single 3.3V or 5.0V for LCD driving.
The type of data and control signals are digital and transmitted via CMOS interface per Typ. 40
MHz clock cycle.
Inverter for backlight is not included in this module. General specifications are summarized in the
following table:
ITEM
Display Area (mm)
Number of Dots
Pixel Pitch (mm)
Color Pixel Arrangement
Display Mode
Number of Color
Brightness (cd/m2)
Wide Viewing Angle Technology
Surface Treatment
SPECIFICATION
246.0(H) × 184.5(V)
(12.106-inch diagonal)
800 × 3 (H) × 600 (V)
0.3075 (H) × 0.3075 (V)
RGB vertical stripe
Normally white TN
262 K
400
Optical compensation film
Antiglare and hard-coating 3H
Viewing Angle (CR 10)
-6565° (H) -75~45° (V)
Electrical Interface
Optimum Viewing Angle(Contrast ratio)
Module Size (mm)
Module Mass (g)
Backlight Unit
CMOS
6 o’clock
280.0 (W) × 210.0 (H) × 12.0 (D)
720
CCFL, 2-tubes, edge-light, replaceable
Characteristic value without any note is typical value.
MDTI Confidential
(4/22)
D121S-L01_02_00
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com

No Preview Available !

Global LCD Panel Exchange Center
www.panelook.com
3. ABSOLUTE MAXIMUM RATINGS
ITEM
SYMBOL
MIN.
MAX
UNIT
Power Supply Voltage for LCD
VCC
0
6.0
V
Logic Input Voltage
VI -0.3 6.5
V
Lamp Voltage
VL
0
2000
Vrms
Lamp Current
IL 0 18 mArms
Lamp Frequency
FL --
80 kHz
Operation Temperature(Panel)
Note 1,2)
Top(Panel)
-20
70
°C
Operation Temperature(Ambient) Note 2) Top(Ambient)
-20
70
°C
Storage Temperature
Note 2)
Tstg
-20
80
°C
[Note]
1) Measured at the center of active area and at the center of panel back surface
2) Top,Tstg 40°C : 90%RH max. without condensation
Top,Tstg > 40°C : Absolute humidity shall be less than the value of 90%RH at 40°C without
condensation.
4. ELECTRICAL CHARACTERISTICS
(1) TFT-LCD
Ambient temperature: Ta = 25
ITEM
SYMBOL MIN. TYP. MAX. UNIT
Remarks
Power Supply
3.3V powered
Voltage for LCD 5.0V powered
VCC
VCC
3.0 3.3 3.6
4.5 5.0 5.5
V
V
*1)
*1)
Power Supply
3.3V powered
Current for LCD 5.0V powered
ICC
ICC
-- 340 500 mA
-- 220 340 mA
*2)
*2)
Permissive Input Ripple Voltage
VRP
-- -- 100 mVp-p VCC = +3.3V/5.0V
Logic Input
Voltage
High
Low
VIH
VIL
2.0 -- 5.5
0 -- 0.8
V
V
*1) Power and signals sequence:
t1 10 ms
0 < t2 50 ms
0 < t3 50 ms
200 ms t4
200 ms t5
0 t6
LC D Power Supply
0 .9 VC C
Logic Signal
0.1VCC
VCC
data
0 .9 VC C
0.1VCC 0.1VCC
t1 t2
Backlight
t3
t4
Backlight Power Supply
t5 t6
data: RGB DATA, DCLK, HD, VD, DENA
MDTI Confidential
(5/22)
D121S-L01_02_00
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com