K1068.pdf 데이터시트 (총 3 페이지) - 파일 다운로드 K1068 데이타시트 다운로드

No Preview Available !

Ordering number:EN2748
N-Channel Junction Silicon FET
2SK1068
Impedance Conversion Applications
Applications
· Impedance conversion.
· Infrared sensor.
Features
· Small IGSS.
· Small Crss.
· Ultrasmall-sized package permitting 2SK1068-
applied sets to be made smaller and slimmer.
Package Dimensions
unit:mm
2058
[2SK1068]
0.3
3
0.15
0 to 0.1
12
0.65 0.65
2.0
0.3 0.6
0.9
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Drain-to-Source Voltage
Gate-to-Drain Voltage
Gate Current
Drain Current
Allowable Power Dissipation
Junction Temperature
Storage Temperature
Symbol
VDSX
VGDS
IG
ID
PD
Tj
Tstg
Conditions
Electrical Characteristics at Ta = 25˚C
Parameter
Symbol
Conditions
Gate-to-Drain Breakdown Voltage
Gate-to-Source Leakage Current
Zero-Gate Voltage Drain Current
Cutoff Voltage
Forward Transfer Admittance
V(BR)GDS
IGSS
IDSS
VGS(off)
| yfs |
* : The 2SK1068 is classified by IDSS as follows (unit : µA) :
IG=–10µA, VDS=0
VGS=–20V, VDS=0
VDS=10V, VGS=0
VDS=10V, ID=1µA
VDS=10V, VGS=0, f=1kHz
30 10 80 60 11 180 150 12 300
(Note) Marking : B
IDSS rank : 10, 11, 12
• For CP package version, use the 2SK545.
1 : Source
2 : Drain
3 : Gate
SANYO : MCP
Ratings
40
–40
10
1
100
150
–55 to +150
Unit
V
V
mA
mA
mW
˚C
˚C
Ratings
min typ max
Unit
–40 V
–500 pA
30* 300* µA
–0.4 –1.5 –4.0 V
0.05 0.13
mS
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
51099TH (KT)/4298TA, TS No.2748–1/3

No Preview Available !

Continued from preceding page.
Parameter
Input Capacitance
Reverse Transfer Capacitance
2SK1068
Symbol
Ciss
Crss
Conditions
VDS=10V, VGS=0, f=1MHz
VDS=10V, VGS=0, f=1MHz
Ratings
1.7
0.7
Unit
pF
pF
No.2748–2/3

No Preview Available !

2SK1068
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of May, 1999. Specifications and information herein are subject to
change without notice.
PS No.2748–3/3