B070EW01-V0.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 B070EW01-V0 데이타시트 다운로드

No Preview Available !

www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
( V) Preliminary Specifications
( ) Final Specifications
Module
Model Name
Note ( )
7”(7”) 1280X800 16:10 Color TFT-LCD
with LED Backlight design
B070EW01 V0 (H/W:1A)
LED Backlight without driving circuit design
Customer
Date
Checked &
Approved by
Date
Note: This Specification is subject to change
without notice.
Approved by
Date
Trista Jiang
02/18/2011
Prepared by
Date
Wen Hwa
02/18/2011
NBBU Marketing Division
AU Optronics corporation
B070EW01 V0 Document Version : 0.5
1 of 30
www.panelook.com

No Preview Available !

www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Contents
+DQGOLQJ 3UHFDXWLRQV
*HQHUDO 'HVFULSWLRQ
2.1 General Specification ..........................................................................................................................6
2.2 Optical Characteristics ........................................................................................................................7
)XQFWLRQDO %ORFN 'LDJUDP
4.1 Absolute Ratings of TFT LCD Module.............................................................................................13
4.2 Absolute Ratings of Environment .....................................................................................................13
(OHFWULFDO &KDUDFWHULVWLFV
5.1 TFT LCD Module..............................................................................................................................14
5.2 Backlight Unit ...................................................................................................................................16
6LJQDO ,QWHUIDFH &KDUDFWHULVWLF
6.1 Pixel Format Image ...........................................................................................................................17
6.2 The Input Data Format ......................................................................................................................18
6.3 Integration Interface Requirement.....................................................................................................19
6.4 Interface Timing ................................................................................................................................21
3DQHO 5HOLDELOLW\ 7HVW
7.1 Vibration Test ....................................................................................................................................23
7.2 Shock Test .........................................................................................................................................23
7.3 Reliability Test...................................................................................................................................23
0HFKDQLFDO &KDUDFWHULVWLFV
8.1 LCM Outline Dimension...................................................................................................................24
6KLSSLQJ DQG 3DFNDJH
9.1 Shipping Label Format ......................................................................................................................25
9.2 Carton Package..................................................................................................................................26
$SSHQGL[ (',' 'HVFULSWLRQ………………………………………………
B070EW01 V0 Document Version : 0.5
2 of 30
www.panelook.com

No Preview Available !

www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page
Old description
0.1 20100930
First Edition for Customers
New Description
Remark
0.2 20101004
Front Page Note
Front Page Note
LED Backlight with driving circuit design LED Backlight without driving circuit
design
0.3 20101129 5 2.1 General Specification
White Luminance (ILED=20 mA)
2.1 General Specification
White Luminance (ILED=22 mA)
Update
5 2.1 General Specification
Luminance Uniformity
2.1 General Specification
Update
Luminance Uniformity : 1.25 max (5 points)
5 2.1 General Specification
Response Time : 25ms
2.1 General Specification
Response Time : 25ms typ
Update
5 2.1 General Specification
2.1 General Specification
Update
Power Consumption
Note 1, Logic Power is 0.85W at mosaic
Power Consumption
Note1 Logic Power preliminary estimated
pattern & backlight light unit power is 1.35W value is 0.7W at mosaic pattern & backlight
@400nits. This does not count LED driver, light unit preliminary estimated value power
designed in the system side, efficiency. The is 1.45W @400nits.
total power consumption will change with
different LED driver design
Note2: LED driver on system
5 2.1 General Specification
Weight: 100g max
2.1 General Specification
Weight: 90g max
Update
5 2.1 General Specification
Physical Size
Include bracket
2.1 General Specification
Physical Size
Include bracket
Update
Length
Width
Min.
143.90
106.25
Typ.
144.20
106.75
Max.
144.50
107.25
7 2.2 Optical Characteristics
White Luminance : ILED=20mA
7 2.2 Optical Characteristics
View Angle
(șR ,șL ,ȥH,ȥL):=Typ (80,80,80,80)
7 2.2 Optical Characteristics
Luminance Uniformityį5P
7 2.2 Optical Characteristics
Luminance Uniformityį13P
7 2.2 Optical Characteristics
Response Time
Length
Width
Min.
163.90
106.45
Typ.
164.20
106.75
Max.
164.50
107.05
2.2 Optical Characteristics
White Luminance :ILED=22mA
2.2 Optical Characteristics
View Angle
(șR ,șL ,ȥH,ȥL):=Typ (85,85,85,85)
(șR ,șL ,ȥH,ȥL):=Min(80,80,80,80)
2.2 Optical Characteristics
Luminance Uniformityį5 = 1.25 max
2.2 Optical Characteristics
Luminance Uniformityį13 = 1.43 max
2.2 Optical Characteristics
Response Time = 35 ms, max
Update
Update
Update
Update
Update
B070EW01 V0 Document Version : 0.5
3 of 30
www.panelook.com

No Preview Available !

www.panelook.com
0.4 20110211
0.5 20110218
Product Specification
AU OPTRONICS CORPORATION
13 4. Absolute Maximum Ratings
4. Absolute Maximum Ratings
Update
4.1 Absolute Ratings of TFT LCD Module 4.1 Absolute Ratings of TFT LCD Module
Vin (Typ, Max) = (3.3, 3.6)
14 5. Electrical Characteristics
5. Electrical Characteristics
Update
5.1 TFT LCD Module
5.1 TFT LCD Module
5.1.1 Power Specification
5.1.1 Power Specification
Symble Parameter Min Typ Max Symble Parameter Min Typ Max
PDD
IDD
VDD
IPDD
Current
- 0.9 TB
-
270
TDB
D
PDD
IDD
VDD
IPDD
Current
-
-
0.7
212
14 5.2 Backlight Unit
5.2.1 LED characteristics
14 5.2.2 Backlight output to LCM signal
characteristics
5.2 Backlight Unit
5.2.1 LED characteristics
PLED = 1.45, Max
5.2.2 Backlight output to LCM signal
characteristics
Update
Update
16 6.3 Integration Interface Requirement
6.3.1 Connector Description
6.3 Integration Interface Requirement
6.3.1 Connector Description
Update
20 6.3.2 Pin assignment
6.3.2 Pin assignment
Update
Pin 35~37 Enable
Pin 35~37 NC & Ground
7 2.2 Optical characteristics
Color TBD
2.2 Optical characteristics
Color update
Update
3 2.2 Optical Characteristics
Luminance Uniformityį5 = 1.43 max
22 6.5 Power ON/OFF Sequence
Chart & table (T1~T12)
2.2 Optical Characteristics
Luminance Uniformityį13 = 1.43 max
6.5 Power ON/OFF Sequence
Chart & table (T1~T7)
Update
Update
B070EW01 V0 Document Version : 0.5
4 of 30
www.panelook.com

No Preview Available !

www.panelook.com
Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
10) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example),
do not twist nor bend the TFT Module even momentary. At designing the enclosure, it
should be taken into consideration that no bending/twisting forces are applied to the TFT
Module from outside. Otherwise the TFT Module may be damaged.
11) Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
12) Disconnecting power supply before handling LCD modules, it can prevent electric shock, DO NOT
TOUCH the electrode parts, cables, connectors and LED circuit part of TFT module that a LED
light bar build in as a light source of back light unit. It can prevent electrostatic breakdown.
B070EW01 V0 Document Version : 0.5
5 of 30
www.panelook.com