MT29F1G08ABBEAH4-IT.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 MT29F1G08ABBEAH4-IT 데이타시트 다운로드

No Preview Available !

Micron Confidential and Proprietary
Preliminary
1Gb x8, x16: NAND Flash Memory
Features
NAND Flash Memory
MT29F1G08ABAEAWP-IT, MT29F1G08ABAEAWP, MT29F1G08ABAEAH4-IT
MT29F1G08ABAEAH4, MT29F1G08ABBEAH4-IT, MT29F1G08ABBEAH4,
MT29F1G16ABBEAH4-IT, MT29F1G16ABBEAH4, MT29F1G08ABBEAHC-IT,
MT29F1G08ABBEAHC, MT29F1G16ABBEAHC-IT, MT29F1G16ABBEAHC
Features
• Open NAND Flash Interface (ONFI) 1.0-compliant1
• Single-level cell (SLC) technology
• Organization
– Page size x8: 2112 bytes (2048 + 64 bytes)
– Page size x16: 1056 words (1024 + 32 words)
– Block size: 64 pages (128K + 4K bytes)
– Device size: 1Gb: 1024 blocks
• Asynchronous I/O performance
tRC/tWC: 20ns (3.3V), 25ns (1.8V)
• Array performance
– Read page: 25µs
– Program page: 200µs (TYP, 3.3V and 1.8V)
– Erase block: 700µs (TYP)
• Command set: ONFI NAND Flash Protocol
• Advanced command set
– Program page cache mode
– Read page cache mode
– One-time programmable (OTP) mode
– Read unique ID
– Internal data move
– Block lock (1.8V only)
• Operation status byte provides software method for
detecting
– Operation completion
– Pass/fail condition
– Write-protect status
• Internal data move operations supported within the
device from which data is read
• Ready/busy# (R/B#) signal provides a hardware
method for detecting operation completion
• WP# signal: write protect entire device
• First block (block address 00h) is valid when ship-
ped from factory with ECC. For minimum required
ECC, see Error Management.
• Block 0 requires 1-bit ECC if PROGRAM/ERASE cy-
cles are less than 1000
• RESET (FFh) required as first command after pow-
er-on
• Alternate method of device initialization (Nand_In-
it) after power up3 (contact factory)
• Quality and reliability
– Data retention: 10 years
– Endurance: 100,000 PROGRAM/ERASE cycles
• Operating Voltage Range
– VCC: 2.7–3.6V
– VCC: 1.7–1.95V
• Operating temperature:
– Commercial: 0°C to +70°C
– Industrial (IT): –40ºC to +85ºC
• Package
– 48-pin TSOP type 1, CPL2
– 63-ball VFBGA
Notes:
1. The ONFI 1.0 specification is available at
www.onfi.org.
2. CPL = Center parting line.
3. Available only in the 1.8V VFBGA package.
PDF: 09005aef847d5585
m68m_non_ecc.pdf – Rev. E 7/12 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.
‡Products and specifications discussed herein are for evaluation and reference purposes only and are subject to change by
Micron without notice. Products are only warranted by Micron to meet Micron’s production data sheet specifications.

No Preview Available !

Micron Confidential and Proprietary
Preliminary
1Gb x8, x16: NAND Flash Memory
Features
Part Numbering Information
Micron NAND Flash devices are available in different configurations and densities. Verify valid part numbers by
using Micron’s part catalog search at www.micron.com. To compare features and specifications by device type,
visit www.micron.com/products. Contact the factory for devices not found.
Figure 1: Marketing Part Number Chart
MT 29F 1G 08 A B B E A HC xx xx x ES :E
Micron Technology
Product Family
29F = NAND Flash memory
Density
1G = 1Gb
Device Width
08 = 8-bit
16 = 16-bit
Level
A= SLC
Classification
Mark Die nCE RnB I/O Channels
B1
11
1
Operating Voltage Range
A = 3.3V (2.7–3.6V)
B = 1.8V (1.7–1.95V)
Feature Set
E = Feature set E
Design Revision (shrink)
Production Status
Blank = Production
ES = Engineering sample
MS = Mechanical sample
QS = Qualification sample
Reserved for Future Use
Blank
Operating Temperature Range
Blank = Commercial (0°C to +70°C)
IT = Industrial (–40°C to +85°C)
Speed Grade
Blank
Package Code
WP = 48-pin TSOP 1
HC = 63-ball VFBGA (10.5 x 13 x 1.0mm)
H4 = 63-ball VFBGA (9 x 11 x 1.0mm)
Interface
A = Async only
PDF: 09005aef847d5585
m68m_non_ecc.pdf – Rev. E 7/12 EN
2 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.

No Preview Available !

Micron Confidential and Proprietary
Preliminary
1Gb x8, x16: NAND Flash Memory
Features
Contents
General Description ......................................................................................................................................... 8
Signal Descriptions and Assignments ................................................................................................................ 8
Signal Assignments ........................................................................................................................................... 9
Package Dimensions ....................................................................................................................................... 12
Architecture ................................................................................................................................................... 15
Device and Array Organization ........................................................................................................................ 16
Asynchronous Interface Bus Operation ........................................................................................................... 18
Asynchronous Enable/Standby ................................................................................................................... 18
Asynchronous Commands .......................................................................................................................... 18
Asynchronous Addresses ............................................................................................................................ 20
Asynchronous Data Input ........................................................................................................................... 21
Asynchronous Data Output ......................................................................................................................... 22
Write Protect# ............................................................................................................................................ 23
Ready/Busy# .............................................................................................................................................. 23
Device Initialization ....................................................................................................................................... 28
Command Definitions .................................................................................................................................... 29
Reset Operations ............................................................................................................................................ 31
RESET (FFh) ............................................................................................................................................... 31
Identification Operations ................................................................................................................................ 32
READ ID (90h) ............................................................................................................................................ 32
READ ID Parameter Tables .............................................................................................................................. 33
READ PARAMETER PAGE (ECh) ...................................................................................................................... 35
Parameter Page Data Structure Tables ............................................................................................................. 36
READ UNIQUE ID (EDh) ................................................................................................................................ 39
Feature Operations ......................................................................................................................................... 40
SET FEATURES (EFh) .................................................................................................................................. 41
GET FEATURES (EEh) ................................................................................................................................. 42
Status Operations ........................................................................................................................................... 45
READ STATUS (70h) ................................................................................................................................... 46
Column Address Operations ........................................................................................................................... 47
RANDOM DATA READ (05h-E0h) ................................................................................................................ 47
RANDOM DATA INPUT (85h) ...................................................................................................................... 48
PROGRAM FOR INTERNAL DATA INPUT (85h) ........................................................................................... 48
Read Operations ............................................................................................................................................. 50
READ MODE (00h) ..................................................................................................................................... 51
READ PAGE (00h-30h) ................................................................................................................................ 51
READ PAGE CACHE SEQUENTIAL (31h) ...................................................................................................... 52
READ PAGE CACHE RANDOM (00h-31h) .................................................................................................... 53
READ PAGE CACHE LAST (3Fh) .................................................................................................................. 53
Program Operations ....................................................................................................................................... 55
PROGRAM PAGE (80h-10h) ......................................................................................................................... 55
PROGRAM PAGE CACHE (80h-15h) ............................................................................................................. 56
Erase Operations ............................................................................................................................................ 58
ERASE BLOCK (60h-D0h) ............................................................................................................................ 58
Internal Data Move Operations ....................................................................................................................... 59
READ FOR INTERNAL DATA MOVE (00h-35h) ............................................................................................. 59
PROGRAM FOR INTERNAL DATA MOVE (85h-10h) ..................................................................................... 61
Block Lock Feature ......................................................................................................................................... 62
WP# and Block Lock ................................................................................................................................... 62
UNLOCK (23h-24h) .................................................................................................................................... 62
PDF: 09005aef847d5585
m68m_non_ecc.pdf – Rev. E 7/12 EN
3 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.

No Preview Available !

Micron Confidential and Proprietary
Preliminary
1Gb x8, x16: NAND Flash Memory
Features
LOCK (2Ah) ................................................................................................................................................ 65
LOCK TIGHT (2Ch) ..................................................................................................................................... 66
BLOCK LOCK READ STATUS (7Ah) .............................................................................................................. 67
One-Time Programmable (OTP) Operations .................................................................................................... 69
OTP DATA PROGRAM (80h-10h) ................................................................................................................. 70
RANDOM DATA INPUT (85h) ...................................................................................................................... 71
OTP DATA PROTECT (80h-10) ..................................................................................................................... 72
OTP DATA READ (00h-30h) ......................................................................................................................... 74
Error Management ......................................................................................................................................... 76
Electrical Specifications .................................................................................................................................. 77
Electrical Specifications – AC Characteristics and Operating Conditions ........................................................... 79
Electrical Specifications – DC Characteristics and Operating Conditions ........................................................... 82
Electrical Specifications – Program/Erase Characteristics ................................................................................. 84
Asynchronous Interface Timing Diagrams ....................................................................................................... 85
Revision History ............................................................................................................................................. 95
Rev. E, Preliminary – 7/12 ............................................................................................................................ 95
Rev. D, Preliminary – 2/12 ........................................................................................................................... 95
Rev. C, Preliminary – 2/12 ........................................................................................................................... 95
Rev. B, Preliminary – 11/11 .......................................................................................................................... 95
Rev. A, Preliminary – 08/11 .......................................................................................................................... 95
PDF: 09005aef847d5585
m68m_non_ecc.pdf – Rev. E 7/12 EN
4 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.

No Preview Available !

Micron Confidential and Proprietary
Preliminary
1Gb x8, x16: NAND Flash Memory
Features
List of Tables
Table 1: Asynchronous Signal Definitions ......................................................................................................... 8
Table 2: Array Addressing (x8) ........................................................................................................................ 16
Table 3: Array Addressing (x16) ...................................................................................................................... 17
Table 4: Asynchronous Interface Mode Selection ............................................................................................ 18
Table 5: Command Set .................................................................................................................................. 29
Table 6: READ ID Parameters for Address 00h ................................................................................................. 33
Table 7: READ ID Parameters for Address 20h ................................................................................................. 34
Table 8: Parameter Page Data Structure .......................................................................................................... 36
Table 9: Feature Address Definitions .............................................................................................................. 40
Table 10: Feature Address 90h – Array Operation Mode ................................................................................... 41
Table 11: Feature Addresses 01h: Timing Mode ............................................................................................... 43
Table 12: Feature Addresses 80h: Programmable I/O Drive Strength ................................................................ 44
Table 13: Feature Addresses 81h: Programmable R/B# Pull-Down Strength ...................................................... 44
Table 14: Status Register Definition ................................................................................................................ 45
Table 15: Block Lock Address Cycle Assignments ............................................................................................ 64
Table 16: Block Lock Status Register Bit Definitions ........................................................................................ 67
Table 17: Error Management Details .............................................................................................................. 76
Table 18: Absolute Maximum Ratings ............................................................................................................. 77
Table 19: Recommended Operating Conditions .............................................................................................. 77
Table 20: Valid Blocks .................................................................................................................................... 77
Table 21: Capacitance .................................................................................................................................... 78
Table 22: Test Conditions ............................................................................................................................... 78
Table 23: AC Characteristics: Command, Data, and Address Input (3.3V) ......................................................... 79
Table 24: AC Characteristics: Command, Data, and Address Input (1.8V) ......................................................... 79
Table 25: AC Characteristics: Normal Operation (3.3V) ................................................................................... 80
Table 26: AC Characteristics: Normal Operation (1.8V) ................................................................................... 80
Table 27: DC Characteristics and Operating Conditions (3.3V) ........................................................................ 82
Table 28: DC Characteristics and Operating Conditions (1.8V) ........................................................................ 83
Table 29: ProgramErase Characteristics .......................................................................................................... 84
PDF: 09005aef847d5585
m68m_non_ecc.pdf – Rev. E 7/12 EN
5 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2011 Micron Technology, Inc. All rights reserved.