L-7113P3C.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 L-7113P3C 데이타시트 다운로드

No Preview Available !

PHOTOTRANSISTOR
Part Number: L-7113P3C
Features
z Mechanically and spectrally matched to the infrared emitting
LED lamp .
z RoHS compliant.
Description
Made with NPN silicon phototransistor chips.
KingbrightPackage Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAC9295
APPROVED: WYNEC
REV NO: V.13
CHECKED: Allen Liu
DATE: APR/09/2013
DRAWN: Y.Liu
PAGE: 1 OF 5
ERP: 1101005148

No Preview Available !

Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Min.
Typ.
Max.
Units Test Conditions
VBR CEO
Collector-to-Emitter Breakdown Voltage
VBR ECO
Emitter-to-Collector Breakdown Voltage
VCE (SAT)
Collector-to-Emitter Saturation Voltage
I CEO
Collector Dark Current
30
5
V
IC=100uA
Ee=0mW/cm2
V
IE=100uA
Ee=0mW/cm2
0.8
V
IC=2mA
Ee=20mW/cm2
100
nA
VCE=10V
Ee=0mW/cm2
TR Rise Time (10to 90% )
TF Fall Time (90to 10% )
15 us VCE = 5V
IC=1mA
15 us RL=1000
I (ON)
2θ1/2
On State Collector Current
Angle of half sensitivity
0.5 2.5
- 20
VCE = 5V
mA Ee=1mW/cm2
λ=940nm
- deg
-
rightAbsolute Maximum Ratings at TA=25°C
Parameter
bCollector-to-Emitter Voltage
gEmitter-to-Collector Voltage
Power Dissipation at (or below) 25°C Free Air Temperature
inOperating Temperature
KStorage Temperature
Max.Ratings
30V
5V
100mW
-40°C To +85°C
-40°C To +85°C
Lead Soldering Temperature (>5mm for 5sec)
260°C
SPEC NO: DSAC9295
APPROVED: WYNEC
REV NO: V.13
CHECKED: Allen Liu
DATE: APR/09/2013
DRAWN: Y.Liu
PAGE: 2 OF 5
ERP: 1101005148

No Preview Available !

PACKING & LABEL SPECIFICATIONS
L-7113P3C
Kingbright
SPEC NO: DSAC9295
APPROVED: WYNEC
REV NO: V.13
CHECKED: Allen Liu
DATE: APR/09/2013
DRAWN: Y.Liu
PAGE: 3 OF 5
ERP: 1101005148