IND560.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 IND560 데이타시트 다운로드

No Preview Available !

IND560
Terminal
User’s Guide
www.mt.com
71209394
(09/2010).05

No Preview Available !

© METTLER TOLEDO 2010
No part of this manual may be reproduced or transmitted in any form or by any
means, electronic or mechanical, including photocopying and recording, for any
purpose without the express written permission of METTLER TOLEDO.
U.S. Government Restricted Rights: This documentation is furnished with
Restricted Rights.
Copyright 2010 METTLER TOLEDO. This documentation contains proprietary
information of METTLER TOLEDO. It may not be copied in whole or in part
without the express written consent of METTLER TOLEDO.
METTLER TOLEDO reserves the right to make refinements or changes to the
product or manual without notice.
COPYRIGHT
METTLER TOLEDO® is a registered trademark of Mettler-Toledo, Inc. All other
brand or product names are trademarks or registered trademarks of their
respective companies.
METTLER TOLEDO RESERVES THE RIGHT TO MAKE REFINEMENTS OR CHANGES
WITHOUT NOTICE.
FCC Notice
This device complies with Part 15 of the FCC Rules and the Radio Interference
Requirements of the Canadian Department of Communications. Operation is
subject to the following conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his or her expense.
Declaration of Conformity is located on the documentation CD.

No Preview Available !

NOTE ON FIRMWARE VERSIONS
This manual describes features and functions of the IND560 terminal with
version 4.xx firmware. Terminals with version 3.xx firmware or lower will differ
in some areas. The following list indicates the key differences between versions:
New in version 4.xx – optional USB host port; install, backup and restore
software via USB; calibration test reports.
New in version 3.xx –operation as a Remote Display, Drive-560 Application
Software, DYN-560 Application Software, EtherNet / IP PLC interface, repeat
print function, PLC messaging, analog section saturation test and warning,
supports selection of Tare or Target Table record via PC or PLC, Scale
branch accessibility (view only) when Approved, added a Reset Transaction
Counter softkey to home screen, updated MinWeigh™ formula, and added
various new Shared Data variables.
Version 3.01 firmware is specifically required for operation of the Modbus-
TCP interface
Statement regarding harmful substances
We do not make direct use of harmful materials such as asbestos, radioactive
substances or arsenic compounds. However, we purchase components from
third party suppliers, which may contain some of these substances in very small
quantities.

No Preview Available !

CUSTOMER FEEDBACK
Your feedback is important to us! If you have a problem with this product or its documentation, or a suggestion on how we
can serve you better, please fill out and send this form to us. Or, send your feedback via email to:
quality_feedback.mtwt@mt.com. If you are in the United States, you can mail this postpaid form to the address on the
reverse side or fax it to (614) 438-4355. If you are outside the United States, please apply the appropriate amount of
postage before mailing.
Your Name:
Organization Name:
Address:
Phone Number: ( )
E-mail Address:
Fax Number: ( )
Date:
METTLER TOLEDO Order Number:
Part / Product Name:
Part / Model Number:
Serial Number:
Company Name for Installation:
Contact Name:
Phone Number:
Please check the appropriate box to indicate how well this product met your expectations in its intended use?
Met and exceeded my needs
Met all needs
Met most needs
Met some needs
Did not meet my needs
Comments/Questions:
DO NOT WRITE IN SPACE BELOW; FOR METTLER TOLEDO USE ONLY
Retail
Light Industrial
Heavy Industrial
Response: Include Root Cause Analysis and Corrective Action Taken.
Custom

No Preview Available !

FOLD THIS FLAP FIRST
BUSINESS REPLY MAIL
FIRST CLASS PERMIT NO. 414 COLUMBUS, OH
POSTAGE WILL BE PAID BY ADDRESSEE
Mettler-Toledo, Inc.
Quality Manager - MTWT
P.O. Box 1705
Columbus, OH 43216
USA
Please seal with tape
NO POSTAGE
NECESSARY
IF MAILED IN THE
UNITED STATES