U2GWJ2C42.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 U2GWJ2C42 데이타시트 다운로드

No Preview Available !

2GWJ2C42,U2GWJ2C42
TOSHIBA SCHOTTKY BARRIER RECTIFIER STACK SCHOTTKY BARRIER TYPE
2GWJ2C42,U2GWJ2C42
SWITCHING MODE POWER SUPPLY APPLICATION
CONVERTER & CHOPPER APPLICATION
Unit: mm
l Average Output Rectified Current : IO = 2 A
l Repetitive Peak Reverse Voltage : VRRM = 40 V
l Low Switching Losses and Output Noise
MAXIMUJM RATAINGS (Ta = 25°C)
CHARACTERISTIC
Repetitive Peak Reverse Voltage
Average Output Rectified Current
Peak One Cycle Surge Forward
Current (Sine Wave)
Junction Temparature
Storage Temparature Range
SYMBOL
VRRM
IO
IFSM
Tj
Tstg
RATING
40
2
15 (50Hz)
16.5 (60Hz)
40~125
40~150
UNIT
V
A
A
°C
°C
JEDEC
JEITA
TOSHIBA
127B1A
ELECTRICALl CHARACTERISTICS (Ta = 25°C)
CHARACTERISTIC
Peak Forward
Voltage
(Note 1)
Repetitive Peak
ReverseCurrent
(Note 1)
Junction Capacitance
(Note 1)
Thermal Resistance
(Junction to Case)
Thermal Resistance
(junction to Ambient)
SYMBOL
VFM
IRRM
Cj
Rth (jc)
Rth (ja)
TEST CONDITION TYP.
IFM = 1.0A
VRRM = 40V
VR = 10 V,
f = 1 MHz
45
DC
DC (250 mm
× 0.8 mm Ceramic)
MAX UNIT
0.55 V
1.0 mA
pF
8 °C / W
125 °C / W
Note 1: A value of one cell.
POLARITY
MARKING
JEDEC
JEITA
TOSHIBA
Weight: 0.55 g
127B2A
1 2001-07-09

No Preview Available !

2GWJ2C42,U2GWJ2C42
2 2001-07-09

No Preview Available !

2GWJ2C42,U2GWJ2C42
3 2001-07-09

No Preview Available !

2GWJ2C42,U2GWJ2C42
RESTRICTIONS ON PRODUCT USE
000707EAA
· TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc..
· The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this
document shall be made at the customer’s own risk.
· The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other
rights of the third parties which may result from its use. No license is granted by implication or otherwise under
any intellectual property or other rights of TOSHIBA CORPORATION or others.
· The information contained herein is subject to change without notice.
4 2001-07-09