F06U20S.pdf 데이터시트 (총 4 페이지) - 파일 다운로드
 No Preview Available !
Features
• Ultrafast with soft recovery
• Low forward voltage
Applications
• Power switching circuits
• Output rectifiers
• Freewheeling diodes
• Switching mode power supply
FFPF06U20S
12
TO-220F
1. Cathode 2. Anode
ULTRA FAST RECOVERY RECTIFIER
Absolute Maximum Ratings TC=25°C unless otherwise noted
Symbol
Parameter
VRRM
IF(AV)
IFSM
Peak Repetitive Reverse Voltage
Average Rectified Forward Current
@ TC = 100°C
Non-repetitive Peak Surge Current
60Hz Single Half-Sine Wave
TJ, TSTG
Operating Junction and StorageTemperature
Value
200
6
60
- 65 to +150
Thermal Characteristics
Symbol
RθJC
Parameter
Maximum Thermal Resistance, Junction to Case
Value
8.0
Electrical Characteristics TC=25 °C unless otherwise noted
Symbol
Parameter
VFM *
IRM *
Maximum Instantaneous Forward Voltage
I F = 6A
I F = 6A
Maximum Instantaneous Reverse Current
@ rated VR
trr Maximum Reverse Recovery Time
Irr Maximum Reverse Recovery Current
Qrr Maximum Reverse Recovery Charge
(IF =6A, di/dt = 200A/µs)
WAVL
Avalanche Energy
* Pulse Test: Pulse Width=300µs, Duty Cycle=2%
TC = 25 °C
TC = 100 °C
TC = 25 °C
TC = 100 °C
Min.
-
-
-
-
-
-
-
0.5
Typ.
-
-
-
-
-
-
-
-
Max.
1.2
1.0
6
60
35
2.5
45
-
Units
V
A
A
°C
Units
°C/W
Units
V
µA
ns
A
nC
mJ
Rev. F, September 2000
 No Preview Available !
Typical Characteristics
30
10 T = 100oC
C
TC = 25oC
1
0.1
0.0
0.5 1.0 1.5
Forward Voltage , VF [V]
2.0
Figure 1. Typical Forward Voltage Drop
vs. Forward Current
200
Typical Capacitance
at 0V = 159 pF
150
100
50
0
0.1 1
10 100
Reverse Voltage , V [V]
R
Figure 3. Typical Junction Capacitance
6
IF = 6A
5
T = 25oC
C
4
3
2
1
0
100
500
di/dt [A/µs]
Figure 5. Typical Reverse Recovery Current
vs. di/dt
1000
100
T = 100oC
C
10
1
T = 25oC
C
0.1
0.01
0.001
0
50 100 150
Reverse Voltage , VR [V]
Figure 2. Typical Reverse Current
vs. Reverse Voltage
200
40
IF = 6A
T = 25oC
C
35
30
25
20
100
di/dt [A/µs]
500
Figure 4. Typical Reverse Recovery Time
vs. di/dt
10
5
0
60 80 100 120 140 160
Case Temperature , T [oC]
C
Figure 6. Forward Current Derating Curve
Rev. F, September 2000
 No Preview Available !
Package Dimensions
TO-220F 2L
10.16 ±0.20
ø3.18 ±0.10
2.54 ±0.20
(0.70)
(1.00x45°)
MAX1.47
0.80 ±0.10
2.54TYP
[2.54 ±0.20]
0.35 ±0.10
2.54TYP
[2.54 ±0.20]
9.40 ±0.20
2.76 ±0.20
0.50
+0.10
0.05
Dimensions in Millimeters
Rev. F, September 2000
 No Preview Available !
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DOME™
E2CMOSTM
EnSignaTM
FACT™
FACT Quiet Series™
FAST®
FASTr™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
OPTOLOGIC™
OPTOPLANAR™
POP™
PowerTrench®
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SyncFET™
TinyLogic™
UHC™
VCX™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTENAPPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
2. A critical component is any component of a life
systems which, (a) are intended for surgical implant into
support device or system whose failure to perform can
the body, or (b) support or sustain life, or (c) whose
be reasonably expected to cause the failure of the life
failure to perform when properly used in accordance
support device or system, or to affect its safety or
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
effectiveness.
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Preliminary
Product Status
Formative or
In Design
First Production
No Identification Needed
Full Production
Definition
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Rev. F1