B101EAN01.0.pdf 데이터시트 (총 25 페이지) - 파일 다운로드 B101EAN01.0 데이타시트 다운로드

No Preview Available !

(V ) Preliminary Specifications
( ) Final Specifications
Module
Model Name
Note ( )
10.1”(10.01”) WXGA 16:10 Color TFT-LCD
B101EAN01.0 (H/W: 0A) LCM
Customer
Date
Approved by
Date
Checked &
Approved by
Date
YW Lee
August 28, 2013
Prepared by
Bing Ho
August 28th, 2013
Note: This Specification is subject to change
without notice.
MPBU Marketing Division
AU Optronics corporation

No Preview Available !

Contents
1. Handling Precautions......................................................... 4
2. General Description ........................................................... 5
2.1 Display Specification ................................................................................................................. 5
2.2 Optical Characteristics ............................................................................................................... 7
3. Functional Block Diagram ................................................ 12
4. Absolute Maximum Ratings ............................................. 13
4.1 Absolute Ratings of TFT LCD Module.................................................................................... 13
4.2 Absolute Ratings of Environment ............................................................................................ 13
5. Electrical Characteristics ................................................. 14
5.1 TFT LCD Module .................................................................................................................... 14
6. Signal Interface Characteristic ........................................ 16
6.1 Pixel Format Image .................................................................................................................. 16
6.2 The Input Data Format ............................................................................................................. 17
6.3 Integration Interface Requirement............................................................................................ 18
6.5 Power ON/OFF Sequence ........................................................................................................ 21
7. Panel Reliability Test ....................................................... 22
7.1 Vibration Test ........................................................................................................................... 22
7.2 Shock Test ................................................................................................................................ 22
7.3 Reliability Test ......................................................................................................................... 22
8. Mechanical Characteristics .............................................. 23
8.1 Standard Front View................................................................................................................. 23
8.2 Standard Rear View.................................................................................................................. 24
9. Shipping and Package...................................................... 25
9.1 Shipping Label Format............................................................................................................. 25
9.2 Carton Label Format ................................................................................................................ 25
9.3 hipping Package of Palletizing Sequence ................................................................................ 25

No Preview Available !

Version and Date Page
0.1 8/28/2013
Record of Revision
Old description
New Description
1st version
Remark

No Preview Available !

1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt
the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example),
do not twist nor bend the TFT Module even momentary. At designing the enclosure, it
should be taken into consideration that no bending/twisting forces are applied to the TFT
Module from outside. Otherwise the TFT Module may be damaged.
12)Disconnecting power supply before handling LCD , it can prevent electric shock, DO NOT
TOUCH the electrode parts, cables, connectors. It can prevent electrostatic breakdown.

No Preview Available !

2. General Description
This specification applies to the 10.1 inch-wide Color a-Si TFT-LCD Module B101EAN01.0.
The display supports the 16:10 WXGA, 1280(H) x800(V) screen and 16.7M colors (RGB 6-bits
data driver with FRC). All input signals are LVDS interface compatible and this module doesn’t
contain an inverter board for backlight.
2.1 Display Specification
The following items are characteristics summary on the table at 25 condition:
Items
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Format
Display Mode
White Luminance
(ILED=17.2mA)
(Note: ILED is LED current)
Luminance Uniformity
Contrast Ratio
Response Time
Nominal Input Voltage VDD
Power Consumption
Unit
[mm]
[mm]
Specifications
10.07
216.96(H) x 135.6(V)
[mm]
1280 x 3(RGB) x 800
0.1695 X 0.1695
R.G.B. Vertical Stripe
[cd/m2]
AHVA, Normally Black
450 typ. (Center Point)
[ms]
[Volt]
[Watt]
TYP. 90% / MIN.80%
9 points measure (W/R/G/B/Gray)
TYP. 900:1 / Min 700:1
Typ. 30 (White to black)
3.3V typ
Logic: 0.79 W@ full white pattern
BLU: 2.064W max. , w/o effi.
* 40ea x 17.2mA x 3.0V
Weight
[Grams] 145g Max
Physical Size
Include bracket
Electrical Interface
Glass Thickness
Surface Treatment
(panel only)
Support Color
[mm]
[mm]
Min
Length 228.01
Width 148.66
Thicknes -
s1 channel LVDS
0.25/0.25 (w/o PF)
HCLR
Typ
228.21
148.86
2.39
Max
228.41
149.06
2.59
16.7M colors ( RGB 6-bit +FRC )