B101EW05-V6.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 B101EW05-V6 데이타시트 다운로드

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
( ) Final Specifications
Module
Model Name
Note
10.1”(10.07”) WXGA 16:10 Color TFT-LCD
with LED Backlight design
B101EW05 V6 (H/W:1A )
LED Backlight with driving circuit design
Color Management (Virtual and Rich Color Solution )
Dynamic Contrast Ratio (Power Saving Solution)
Customer
Date
Checked &
Approved by
Date
Note: This Specification is subject to
change without notice.
Approved by
Date
Boris Chu
1/17/2011
Prepared by
Jay Lin
01/17/2011
NBBU Marketing Division
AU Optronics corporation
B101EW05 V0 Document Version : 0.1
1 of 33
Studio Technology Co. Ltd. ( www.yslcd.com.tw )

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions........................................................................................4
2. General Description..........................................................................................5
2.1 General Specification......................................................................................................... 5
2.2 Optical Characteristics ....................................................................................................... 6
3. Functional Block Diagram ..............................................................................11
4. Absolute Maximum Ratings ...........................................................................12
4.1 Absolute Ratings of TFT LCD Module .............................................................................. 12
4.2 Absolute Ratings of Touch Sensor ................................................................................... 12
4.3 Absolute Ratings of Environment .................................................................................... 12
5. Electrical Characteristics................................................................................13
5.1 TFT LCD Module.................................................................................................................. 13
5.3 Backlight Unit ...................................................................................................................... 16
6. Signal Interface Characteristic ......................................................................17
6.1 Pixel Format Image............................................................................................................ 17
6.2 The Input Data Format ...................................................................................................... 18
6.3 Integration Interface Requirement ................................................................................. 19
6.5 LVDS Interface Timing ....................................................................................................... 21
6.6 Power ON/OFF Sequence................................................................................................ 22
7. Panel Reliability Test........................................................................................23
7.1 Vibration Test ...................................................................................................................... 23
7.2 Shock Test............................................................................................................................ 23
7.3 Reliability Test...................................................................................................................... 23
8. Mechanical Characteristics...........................................................................24
8.1 LCM Outline Dimension .................................................................................................... 24
9. Shipping and Package...................................................................................28
9.1 Shipping Label Format ...................................................................................................... 28
9.2 Carton Package ................................................................................................................ 29
9.3 Shipping Package of Palletizing Sequence .................................................................. 29
10. Appendix .......................................................................................................30
10.1 EDID Description............................................................................................................... 30
B101EW05 V0 Document Version : 0.1
2 of 33
Studio Technology Co. Ltd. ( www.yslcd.com.tw )

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page
0.1 2011/01/17 All
Old description
First Edition for Customer
New Description
Remark
B101EW05 V0 Document Version : 0.1
3 of 33
Studio Technology Co. Ltd. ( www.yslcd.com.tw )

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input
connector.
3) Wipe off water drop immediately. Long contact with water may cause
discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to
rotate nor tilt the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing
the enclosure, it should be taken into consideration that no bending/twisting
forces are applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
12)Small amount of materials having no flammability grade is used in the LCD module.
The LCD module should be supplied by power complied with requirements of Limited
Power Source (IEC60950 or UL1950), or be applied exemption.
13)Disconnecting power supply before handling LCD modules, it can prevent electric
shock, DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of
TFT module that a LED light bar build in as a light source of back light unit. It can
prevent electrostic breakdown.
B101EW05 V0 Document Version : 0.1
4 of 33
Studio Technology Co. Ltd. ( www.yslcd.com.tw )

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
2. General Description
B101EW05 V0 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel,
a driver circuit, and LED backlight system. The screen format is intended to support the
16:10 WXGA, 1280(H) x800(V) screen and 262k colors (RGB 6-bits data driver) with LED
backlight driving circuit. All input signals are LVDS interface compatible.
B101EW05 V0 is designed for a display unit of notebook style personal computer and
industrial machine.
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Format
Display Mode
White Luminance (ILED=21mA)
(Note: ILED is LED current)
Luminance Uniformity
Contrast Ratio
Response Time
Nominal Input Voltage VDD
Power Consumption
Weight
Physical Size
without bracket
Electrical Interface
Glass Thickness
Surface Treatment
Support Color
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance
Unit
[mm]
[mm]
[mm]
[cd/m2]
Specifications
255.85 (10.07W”)
216.96(H) x 135.6(V)
1280 x 3(RGB) x 800
0.1695 X 0.1695
R.G.B. Vertical Stripe
Normally Black
350 typ. (5 points average w/o touch panel)
297 min. (5 points average w/o touch panel)
[ms]
[Volt]
[Watt]
[Grams]
[mm]
[mm]
[oC]
[oC]
1.25 max. (5 points)
1300 typ, 1000 min.
25 typ / 35 Max
+3.3 typ.
3.4 max. (Include Logic and Blu power)
180 max.
Min.
Typ.
Length
228.96
229.46
Width
148.7
149.2
Thickness
---
---
1 channel LVDS
0.3
Anti-Reflection 1.5%, Hardness 3H
262K colors ( RGB 6-bit )
0 to +50
-20 to +60
RoHS Compliance
Max.
229.95
149.7
5.2
B101EW05 V0 Document Version : 0.1
5 of 33
Studio Technology Co. Ltd. ( www.yslcd.com.tw )