B116HAN03.1.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 B116HAN03.1 데이타시트 다운로드

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
( v ) Final Specifications
Module
11.6”(11.58”) FHD 16:9 Color TFT-LCD
with LED Backlight design
Model Name B116HAN03.1
Note ( ) LED Backlight with driving circuit design
Customer
Date
Approved by
Date
Checked &
Approved
by
Date
Note: This Specification is subject to
change without notice.
Kevin KH Shen
07/26/2013
Prepared by
Michael WJ Sun
07/26/2013
MPBU Marketing Division
AU Optronics corporation
B116HAN03.1 Document Version : 1.1
1 of 33

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions .............................................................. 5
2. General Description ................................................................ 6
2.1 General Specification ....................................................................................................................6
2.2 Optical Characteristics..................................................................................................................7
3. Functional Block Diagram ..................................................... 12
4. Absolute Maximum Ratings................................................... 13
4.1 Absolute Ratings of TFT LCD Module....................................................................................13
4.2 Absolute Ratings of Environment...........................................................................................13
5. Electrical Characteristics....................................................... 14
5.1 TFT LCD Module............................................................................................................................14
5.3 Backlight Unit.................................................................................................................................17
6. Signal Interface Characteristic.............................................. 18
6.1 Pixel Format Image .....................................................................................................................18
6.2 Integration Interface Requirement .......................................................................................19
6.4 Interface Timing ...........................................................................................................................21
7. Panel Reliability Test ............................................................ 23
7.1 Vibration Test.................................................................................................................................23
7.2 Shock Test.......................................................................................................................................23
7.3 Reliability Test................................................................................................................................23
8. Mechanical Characteristics.................................................... 23
9. Shipping and Package ........................................................... 23
9.1 Shipping Label Format ...............................................................................................................23
9.2 Carton Package .............................................................................................................................23
9.3 Shipping Package of Palletizing Sequence .........................................................................23
10. Appendix............................................................................. 23
10.1 EDID Description .......................................................................................................................23
B116HAN03.1 Document Version : 1.1
2 of 33

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and
Date
Page
0.1 2012/9/24 All
Old description
First Edition for Customer
New Description
0.2 2012/10/1 18
Update Pin Assignment
20 Update Timing
Characteristics
0.3 2012/10/1 19
Update Pin Assignment
Drawing
20 Update Timing
Characteristics
25, 26. 27 Update 2D-Drawings
28 Update Label Format
29 Update Packing Sequence
30 Update EDID
0.4 2012/10/12 20
Update Clock Frequency
0.5 2012/10/26 5
26
Update thickness to
4.94mm max/ Update
pixel pitch to 0.1335 x
0.1335 mm/ Update power
consumption
Update 2D drawing
28 Update Label Information
29
0.6 2012/11/14 5
6
13
Update Carton Packing
Information
Add 13 point Luminance
Uniformity
Update LED current to
23mA
Add Min brightness
Update color croodinates
Update Power Specification
20 Update frame rate to 60Hz
0.7 2012/11/20 25
Update 2D drawing
0.8 2013/01/08 21
Update 6.4 Note description
1.0 2013/02/19 23
Remove T19/20
29 Update Label
Rema
rk
B116HAN03.1 Document Version : 1.1
3 of 33

No Preview Available !

1.1 2013/3/18 7
14
17
21
Product Specification
AU OPTRONICS CORPORATION
Update Min value of Viewing
angle and C/R
IDD current: 270
IDD current:300
Note1: Black pattern
LED life-time conditions is LED life-time conditions is
IF=19mA
IF=23mA
Timing characteristics
Timing characteristics
1920 x 1080 / 60MHz
1920 x 1080 / 60Hz
B116HAN03.1 Document Version : 1.1
4 of 33

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from
input connector.
3) Wipe off water drop immediately. Long contact with water may cause
discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other
soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or
bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and
insure human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any
directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not
to rotate nor tilt the Interface Connector of the TFT Module.
11)After installation of the TFT Module into an enclosure (Notebook PC
Bezel, for example), do not twist nor bend the TFT Module even
momentary. At designing the enclosure, it should be taken into
consideration that no bending/twisting forces are applied to the TFT
Module from outside. Otherwise the TFT Module may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD
module. The LCD module should be supplied by power complied with
requirements of Limited Power Source (IEC60950 or UL1950), or be applied
exemption.
13) Disconnecting power supply before handling LCD modules, it can prevent
electric shock, DO NOT TOUCH the electrode parts, cables, connectors and
LED circuit part of TFT module that a LED light bar build in as a light source of
back light unit. It can prevent electrostatic breakdown.
B116HAN03.1 Document Version : 1.1
5 of 33