B116HAN03.3.pdf 데이터시트 (총 30 페이지) - 파일 다운로드 B116HAN03.3 데이타시트 다운로드

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
( ) Preliminary Specifications
(V ) Final Specifications
Module
Model Name
11.6”(11.58 ”) 16:9 Color TFT-LCD
with LED Backlight design
B116HAN03.3 (H/W:0A )
Note ( ) LED Backlight with driving circuit design
Customer
Date
Approved by
Date
Checked &
Approved by
Date
Note: This Specification is subject to change
without notice.
Kay Liu
2014/09/12
Prepared by
Date
Doremi Fang
2014/09/12
DMPBU Marketing Division
AU Optronics corporation
B116HAN03.3 Document Version : 1.1
1 of 32

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions...............................................................4
2. General Description .................................................................5
2.1 General Specification ......................................................................................................................... 5
2.2 Optical Characteristics ....................................................................................................................... 6
3. Functional Block Diagram ......................................................11
4. Absolute Maximum Ratings ..................................................12
4.1 Absolute Ratings of TFT LCD Module............................................................................................ 12
4.2 Absolute Ratings of Environment .................................................................................................... 12
5. Electrical Characteristics .......................................................13
5.1 TFT LCD Module ............................................................................................................................ 13
5.2 Backlight Unit .................................................................................................................................. 16
6. Signal Interface Characteristic ..............................................17
6.1 Pixel Format Image .......................................................................................................................... 17
6.2 Integration Interface Requirement.................................................................................................... 18
6.3 Interface Timing ............................................................................................................................... 20
6.4 Power ON/OFF Sequence ................................................................................................................ 21
7. Panel Reliability Test .............................................................24
7.1 Vibration Test ................................................................................................................................... 24
7.2 Shock Test ........................................................................................................................................ 24
7.3 Reliability Test ................................................................................................................................. 24
8. Mechanical Characteristics ....................................................25
8.1 LCM Outline Dimension ................................................................................................................. 25
9. Shipping and Package............................................................27
9.1 Shipping Label Format..................................................................................................................... 27
9.2 Carton Package................................................................................................................................. 28
9.3 Shipping Package of Palletizing Sequence ...................................................................................... 29
10. Appendix .............................................................................30
10.1 EDID Description........................................................................................................................... 30
B116HAN03.3 Document Version : 1.1
2 of 32

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page
Old description
0.1 2013/11/05 All First Edition for Customer
New Description
Remark
0.2 2014/07/28
5 25.6K colors
16.7M colors ( RGB 6-bit + FRC )
6 No color spec
Color spec updated
16 BLU power 1.97W
3.2W
18 Connector Description (w/ compatible) Connector Description (w/o compatible)
0.3 2014/08/18
20 Old Timing Characteristics
30 Old EDID
18 I-PEX 20453-030T-11
New Timing Characteristics
New EDID (Checksum=53)
I-PEX 20453-030T-11 or Equivalent
1.0 2014/08/29
20 Old Timing Characteristics
All Final Spec
New Timing Characteristics
1.1 2014/09/11
16
Add PWM input frequence limit range
(930~950Hz) at notes 4
B116HAN03.3 Document Version : 1.1
3 of 32

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt
the Interface Connector of the TFT Module.
10)After installation of the TFT Module into an enclosure (Notebook PC Bezel, for example),
do not twist nor bend the TFT Module even momentary. At designing the enclosure, it
should be taken into consideration that no bending/twisting forces are applied to the TFT
Module from outside. Otherwise the TFT Module may be damaged.
11)Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
12)Disconnecting power supply before handling LCD modules, it can prevent electric shock,
DO NOT TOUCH the electrode parts, cables, connectors and LED circuit part of TFT
module that a LED light bar build in as a light source of back light unit. It can prevent
electrostic breakdown.
B116HAN03.3 Document Version : 1.1
4 of 32

No Preview Available !

Product Specification
AU OPTRONICS CORPORATION
2. General Description
B116HAN03 V3 is a Color Active Matrix Liquid Crystal Display composed of a TFT LCD panel, a
driver circuit, and LED backlight system. The screen format is intended to support the 16:9 ,
1920(H) x1080(V) screen and 16.7M colors (RGB 6-bits + FRC data driver) with LED backlight
driving circuit. All input signals are eDP interface compatible.
B116HAN03 V3 is designed for a display unit of notebook style personal computer and industrial
machine.
2.1 General Specification
The following items are characteristics summary on the table at 25 condition:
Items
Screen Diagonal
Active Area
Pixels H x V
Pixel Pitch
Pixel Format
Display Mode
White Luminance (ILED=22mA)
(Note: ILED is LED current)
Luminance Uniformity
Contrast Ratio
Response Time
Nominal Input Voltage VDD
Power Consumption
Weight
Physical Size (Panel only)
without bracket
Electrical Interface
Glass Thickness
Surface Treatment
Support Color
B116HAN03.3 Document Version : 1.1
Unit
[mm]
[mm]
Specifications
294.09 (11.58W”)
256.32(H) x 144.18(V)
[mm]
1920 x 3(RGB) x 1080
0.1335 X 0.1335
R.G.B. Vertical Stripe
[cd/m2]
[ms]
[Volt]
[Watt]
AHVA, Normally Black
400 typ.
340 min. (5 points average)
1.25 max. (5 points)
800 typ
25 typ
+3.3 typ.
4.4 W(max.) (Including BLU & Logic Power)
[Grams] 140 max. (Panel only)
[mm]
Length
Width
Min.
269.5
159.5
Typ.
270.0
160.0
Thickness ---
---
[mm]
eDP 1.3 (2 lane)
0.2
HC, Hardness 3H
Reflection 4.3%
Max.
270.5
160.5
2.25 (Panel Side)
4.50 (PCBA Side)
16.7M colors ( RGB 6-bit + FRC )
5 of 32