CPSL03.pdf 데이터시트 (총 3 페이지) - 파일 다운로드 CPSL03 데이타시트 다운로드

No Preview Available !

www.vishay.com
CPSL
Vishay Dale
Wirewound Resistors, Commercial Power,
Four Terminal, Low Value
FEATURES
• Low inductance
• Extremely low resistance values
• Current sensing
• Low temperature coefficients
• High power to size ratio
• Ceramic cases are available with circuit board
stand-offs (designated with a -3 model ending)
• Superior surge capability
• Complete welded construction
• Special inorganic potting compound and
ceramic case provide high thermal conductivity in a
fireproof package
• Compliant to RoHS Directive 2002/95/EC
Notes
* Pb containing terminations are not RoHS compliant, exemptions may apply
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
SCHEMATIC
Sense
leads
Current
leads
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
POWER RATING P40 °C
W
CPSL03...5
CPSL-3-5
3
CPSL03...3
CPSL-3-3
3
CPSL05...5
CPSL-5-5
5
CPSL05...3
CPSL-5-3
5
CPSL07...5
CPSL-7-5
7
CPSL10...5
CPSL-10-5
10
CPSL15...5
CPSL-15-5
15
RESISTANCE RANGE
Ω
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
0.01 to 0.10
TOLERANCE
±%
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
1, 3, 5, 10
WEIGHT (typical)
g
4.0
4.2
5.2
5.4
7.6
10.2
18.9
TECHNICAL SPECIFICATIONS
PARAMETER
Temperature Coefficient
Short Time Overload
Maximum Working Voltage
Operating Temperature Range
Terminal Strength
Dielectric Withstanding Voltage
UNIT
ppm/°C
-
V
°C
lb
VAC
CPSL RESISTOR CHARACTERISTICS
± 100 maximum
5 x rated power for 5 s
(P x R)1/2
- 65 to + 275
10 minimum
1000
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: CPSL05R0500JB143
CPSL 0 5R0 5 0 0 JB1 4 3
GLOBAL MODEL
VALUE
TOLERANCE
CPSL03
CPSL05
CPSL07
CPSL10
CPSL15
R = Decimal
R1000 = 0.10 Ω
F = ± 1.0 %
G = ± 2.0 %
H = ± 3.0 %
J = ± 5.0 %
K = ± 10.0 %
Historical Part Numbering example: CPSL-5-3 0.05 Ω 5 % B14
CPSL-5-3
0.05 Ω
HISTORICAL MODEL
RESISTANCE VALUE
PACKAGING
E14 = Lead (Pb)-free bulk
E31 = Lead (Pb)-free four layer bulk
B14 = Tin/lead bulk
B31 = Tin/lead four layer bulk
SPECIAL
(Dash Number)
(up to 3 digits)
From 1 to 999
as applicable
5%
TOLERANCE CODE
B14
PACKAGING
Revision: 22-Dec-11
1 Document Number: 30217
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

www.vishay.com
DIMENSIONS in inches [millimeters]
CPSLxx...5
1.0 [25.4]
min.
A
1.50 ± 0.062
[38.1 ±1.57]
E
F
B
C
CPSLxx...3
1.0 [25.4]
min.
1.50 ± 0.062
[38.1 ± 1.57]
E
A
F
CPSL
Vishay Dale
C
DB
GLOBAL
MODEL
CPSL03...5
CPSL03...3
CPSL05...5
CPSL05...3
CPSL07...5
CPSL10...5
CPSL15...5
A (1)
± 0.031 [0.794]
0.875 [22.22]
0.875 [22.22]
0.875 [22.22]
0.875 [22.22]
1.391 [35.32]
1.875 [47.62]
1.875 [47.62]
B
± 0.031 [0.794]
0.313 [7.94]
0.313 [7.94]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.375 [9.52]
0.500 [12.70]
DIMENSIONS in inches [millimeters]
C
± 0.031 [0.794]
D
± 0.031 [0.794]
0.313 [7.94]
-
0.313 [7.94]
0.375 [9.52]
0.344 [8.73]
-
0.344 [8.73]
0.438 [11.11]
0.344 [8.73]
-
0.344 [8.73]
-
0.500 [12.70]
-
Note
(1) Potting compound may extend outside of ceramic case up to 0.060 [1.52] maximum per side.
MATERIAL SPECIFICATIONS
Element: Self-supporting copper-nickel alloy or nickel-
chrome alloy, depending on resistance value
Body: Steatite ceramic case with inorganic potting
compound
Terminals: Tinned copper
Part Marking: Dale, model, wattage, value, tolerance, date
code
DERATING
120
100
80
60
40
20
0
- 65 - 25
25
40
E
± 0.001 [0.025]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
0.036 [0.914]
F
± 0.063 [1.59]
0.563 [14.30]
0.563 [14.30]
0.563 [14.30]
0.563 [14.30]
1.000 [25.40]
1.375 [34.93]
1.375 [34.93]
75 125 175 225 275
AMBIENT TEMPERATURE IN °C
PERFORMANCE
TEST
Thermal Shock
Short Time Overload
Dielectric Withstanding Voltage
Low Temperature Operation
Bias Humidity
Load Life
Terminal Strength
Resistance to Solder Heat
CONDITIONS OF TEST
- 55 °C to + 275 °C, 5 cycles, 30 min dwell time
5 x rated power for 5 s
1000 VRMS for 1 min
- 65 °C, full rated working voltage for 45 min
75 °C, 90 % to 100 % RH, 240 h
1000 h at rated power, + 40 °C, 1.5 h “ON”, 0.5 h “OFF”
5 s to 10 s 10 pound pull test, torsion test - 3 alternating directions, 360° each
Terminal immersed 3.5 s in molten solder at 1/8" to 3/16" from body
TEST LIMITS
± (5.0 % + 0.05 Ω) ΔR
± (4.0 % + 0.05 Ω) ΔR
± (2.0 % + 0.05 Ω) ΔR
± (3.0 % + 0.05 Ω) ΔR
± (5.0 % + 0.05 Ω) ΔR
± (5.0 % + 0.05 Ω) ΔR
± (1.0 % + 0.05 Ω) ΔR
± (1.0 % + 0.05 Ω) ΔR
Revision: 22-Dec-11
2 Document Number: 30217
For technical questions, contact: ww2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000