D1213A-01LP4.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 D1213A-01LP4 데이타시트 다운로드

No Preview Available !

D1213A-01LP4
1 CHANNEL LOW CAPACITANCE TVS DIODE ARRAY
Features
IEC 61000-4-2 (ESD): Air ±15kV, Contact ±8kV
1 Channel of ESD Protection
Low Channel Input Capacitance of 0.85pF Typical
Ultra-low Profile (0.4mm max) Leadless Surface Mount Package
Suitable for Compact Portable Electronics
Typically Used at High Speed Ports such as USB 2.0,
IEEE1394, Serial ATA, DVI, HDMI, PCI
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
Case: X2-DFN1006-2
Case Material: Molded Plastic, "Green" Molding Compound. UL
Flammability Classification Rating 94V-0
Moisture Sensitivity: Level 1 per J-STD-020
Terminals: NiPdAu over Copper leadframe. Solderable per MIL-
STD-202, Method 208 e4
Weight: 0.001 grams (Approximate)
X2-DFN1006-2
Pin 1
Bottom View
Pin 2
Device Schematic
Ordering Information (Note 4)
Notes:
Part Number
D1213A-01LP4-7B
Case
X2-DFN1006-2
Packaging
10,000/Tape & Reel
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
4. For packaging details, go to our website at http://www.diodes.com.
Marking Information
U1 U1 = Product Type Marking Code
Line Denotes Pin 1
D1213A-01LP4
Document number: DS35760 Rev. 5 - 2
1 of 4
www.diodes.com
August 2012
© Diodes Incorporated

No Preview Available !

D1213A-01LP4
Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Characteristic
Peak Pulse Current
ESD Protection – Contact Discharge
ESD Protection – Air Discharge
Symbol
IPP
VESD_Contact
VESD_Air
Value
5
±8
±15
Unit Conditions
A 8/20μs, Per Figure 2
kV Standard IEC 61000-4-2
kV Standard IEC 61000-4-2
Thermal Characteristics
Characteristic
Package Power Dissipation (Note 5)
Thermal Resistance, Junction to Ambient (Note 5)
Operating and Storage Temperature Range
Symbol
PD
RθJA
TJ, TSTG
Value
250
500
-65 to +150
Unit
mW
°C/W
°C
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Characteristic
Reverse working voltage
Reverse current (Note 6)
Reverse breakdown voltage
Forward voltage
Reverse clamping voltage, Positive Transients
Reverse clamping voltage, Negative Transients
Dynamic resistance
Capacitance
Symbol
VRWM
IR
VBR
VF
VCL1
VCL2
RDYN
CT
Min
6.0
0.6
Typ
0.1
0.8
10.0
-1.7
0.9
0.85
Max
3.3
1.0
0.95
1.2
Unit
V
μA
V
V
V
V
pF
Test Conditions
VR = VRWM = 3.3V
IR = 1mA
IF = 8mA
IPP = 1A, tp = 8/20μs
IPP = -1A, tp = 8/20μs
IR = 1A, tp = 8/20μs
VR = 1.65V, f = 1MHz
Notes:
5. Device mounted on FR-4 PCB pad layout (2oz copper) as shown on Diodes, Inc. suggested pad layout AP02001, which can be found on our website at
http://www.diodes.com.
6. Short duration pulse test used to minimize self-heating effect.
100
100
75
50
25
0
0 25 50 75 100 125 150 175 200
TA, AMBIENT TEMPERATURE (°C)
Fig. 1 Pulse Derating Curve
50
0
0
D1213A-01LP4
Document number: DS35760 Rev. 5 - 2
2 of 4
www.diodes.com
20 40
t, TIME (μs)
Fig. 2 Pulse Waveform
60
August 2012
© Diodes Incorporated

No Preview Available !

1,000
100
10
1
0.1
0.01
TA = 150°C
TA = 125°C
TA = 85°C
TA = 25°C
TA = -55°C
0.001
0.2 0.4 0.6 0.8 1.0 1.2
VF, INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 3 Typical Forward Characteristics
2.0
f = 1MHz
1.5
D1213A-01LP4
100
10
1
TA = 150°C
TA = 125°C
TA = 85°C
TA = 25°C
TA = -55°C
0.1
0
1.0 2.0 3.0 4.0 5.0
VR, INSTANTANEOUS REVERSE VOLTAGE (V)
Fig. 4 Typical Reverse Characteristics
1.0
0.5
0
0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
VR, REVERSE VOLTAGE (V)
Fig. 5 Typical Total Capacitance vs. Reverse Voltage
Package Outline Dimensions
A
A1
E
D
R
Le
D1213A-01LP4
Document number: DS35760 Rev. 5 - 2
X2-DFN1006-2
Dim Min Max Typ
A 0.34 0.4 0.37
A1 0 0.05 0.03
b 0.45 0.55 0.50
D 0.95 1.075 1.00
E 0.55 0.675 0.60
E
0.40
b L 0.20 0.30 0.25
R 0.05 0.15 0.10
All Dimensions in mm
3 of 4
www.diodes.com
August 2012
© Diodes Incorporated

No Preview Available !

Suggested Pad Layout
X
Y
C
G
Z
D1213A-01LP4
Dimensions
Z
G
X
Y
C
Value (in mm)
1.1
0.3
0.7
0.4
0.7
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2012, Diodes Incorporated
www.diodes.com
D1213A-01LP4
Document number: DS35760 Rev. 5 - 2
4 of 4
www.diodes.com
August 2012
© Diodes Incorporated