INR18650-13L.pdf 데이터시트 (총 19 페이지) - 파일 다운로드 INR18650-13L 데이타시트 다운로드

No Preview Available !

Model
-SAMSUNG SDI Confidential Proprietary
INR18650-13L Version No.
3.1
Sang-Uck Kim
SPECIFICATION OF PRODUCT
Lithium-ion rechargeable cell for power tools
Model name: INR18650-13L
NMC version
Jun., 2010
Samsung SDI Co.,Ltd.
Energy Business Division

No Preview Available !

- SAMSUNG SDI Confidential Proprietary
Model INR18650-13L Version No.
3.1
Sang-Uck Kim
Contents
1. Scope
2. Description and model name
2.1. Description
2.2. Model name
3. Nominal specification
4. Outline dimensions
5. Appearance
6. Standard test conditions
6.1. Environmental conditions
6.2. Measuring equipments
7. Characteristics
7.1. Standard charge
7.2. Standard discharge capacity
7.3 Standard rated discharge capacity
7.4. Initial internal impedance
7.5. Temperature dependence of discharge capacity
7.6. Temperature dependence of charge capacity
7.7. Charge rate capabilities
7.8. Discharge rate capabilities
7.9. Cycle life
7.10. Storage characteristics
7.11. Status of the cell as of ex-factory
8. Mechanical Characteristics
8.1. Drop test
8.2. Vibration test
9. Safety
9.1 Overcharge test
9.2 External short-circuit test
9.3 Reverse charge test
9.4 Heating test
10. Warranty
11. Others
11.1 Storage for a long time
11.2 Others
12. Packing
Proper use and handling of lithium ion cells
Handling precaution and prohibitions of lithium Ion rechargeable cells and batteries
Samsung SDI emergency contact information
Additional remarks
Revision history
- 1 /18 -

No Preview Available !

Model
- SAMSUNG SDI Confidential Proprietary
INR18650-13L Version No.
3.1
Sang-Uck Kim
1. Scope
This product specification has been prepared to specify the rechargeable lithium-ion cell
('cell') to be supplied to the customer by Samsung SDI Co., Ltd.
2. Description and model
2.1 Description
Cell (lithium-ion rechargeable cell, NMC version)
2.2 Model name
INR18650-13L
3. Nominal Specifications
Item
Specification
3.1 Nominal capacity
1,300mAh
(standard charge /0.2C discharge, 2.5V cut-off)
3.2 Minimum capacity
1,250mAh (1C, 2.5V cut-off discharge)
3.3 Charging voltage
4.2±0.05 V
3.4 Nominal voltage
3.5 Charging method
3.6 Charging current
3.6V
CC-CV
(100mA cut-off)
Standard charge: 0.5C
Rapid charge: 4A
3.7 Charging time
3.8 Max. discharge current
(continuous)
3.9 Discharge cut-off voltage
3.10 Cell weight
3.11 Cell dimension
3.12 Operating temperature
(surface temperature)
3.13 Storage temperature
Standard charge : 150min
Rapid charge: 40min (at 25)
18A(at 25), 60% at 250cycle
2.5V
43.0g max
Height : 64.60±0.15mm
Diameter : 18.15 ± 0.10mm
Charge : 0 to 50
(recommended recharge release < 45)
Discharge: -20 to 75
(recommended re-discharge release < 60)
1 year : -20~25(1*)
3 months : -30~45(1*)
1 month : -30~60(1*)
Note (1): If the cell is kept as ex-factory status (50% of charge),
the capacity recovery rate is more than 90% of standard discharge capacity.
- 2 /18 -

No Preview Available !

- SAMSUNG SDI Confidential Proprietary
Model INR18650-13L Version No.
3.1
Sang-Uck Kim
4. Outline dimensions
See the attachment (Fig. 1)
5. Appearance
There shall be no such defects as scratch, rust, discoloration, leakage which
may adversely affect commercial value of the cell.
6. Standard test conditions
6.1 Environmental conditions
Unless otherwise specified, all tests stated in this specification are conducted at
temperature 25±5and humidity 65±20%.
6.2 Measuring equipment
(1) Amp-meter and volt-meter
The amp-meter and volt-meter should have an accuracy of the grade 0.5 or higher.
(2) Slide caliper
The slide caliper should have 0.01 mm scale.
(3) Impedance meter
The impedance meter with AC 1kHz should be used.
7. Characteristics
7.1 Standard charge
This "Standard charge" means charging the cell with charge current 0.5CmA and
then with constant voltage 4.2V 100mA cut-off at 25.
7.2 Standard discharge capacity
The standard discharge capacity is the initial discharge capacity of the cell, which is
measured with discharge current of 1CmA(1,300mA) with 2.5V cut-off at 25within
1hour after the standard charge.
Standard discharge capacity 1,250mAh
7.3 Standard rated discharge capacity
The standard discharge capacity is the initial discharge capacity of the cell, which is
measured with discharge current of 10A with 2.5V cut-off at 25within 1hour after
the standard charge.
Standard rated discharge capacity 1,250mAh
7.4 Initial internal impedance
Initial internal impedance measured at AC 1kHz after standard charge.
Initial internal impedance 30m
7.5 Temperature dependence of discharge capacity
Capacity comparison at each temperature, measured with discharge
constant current 10A and 2.5V cut-off after the standard charge is as follows.
Discharge temperature
-20
-10
0
25
60
60%
75%
80%
100%
95%
Note: If charge temperature and discharge temperature is not the same,
the interval for temperature change is 3 hours.
Percentage as an index of the capacity at 25(=1,250mAh) is 100%.
7.6 Temperature dependence of charge capacity
Capacity comparison at each temperature, measured with discharge constant current
10A and 2.5V cut-off after the standard charge is as follows.
- 3 /18 -

No Preview Available !

Model
- SAMSUNG SDI Confidential Proprietary
INR18650-13L Version No.
3.1
Sang-Uck Kim
Charge temperature
Discharge temperature
05254550
Relative capacity 80% 90% 100% 95% 95%
25
Note: If charge temperature and discharge temperature is not the same,
the interval for temperature change is 3 hours.
Percentage as an index of the capacity at 25(=1,250mAh) is 100%.
7.7 Charge rate capabilities
Discharge capacity is measured with constant current 10A and 2.5V cut-off 25
after the cell is charged with 4.2V as follows.
Charge Condition
Current
0.5C
Rapid 4A
Cut-off
100mA
100mA
Relative
Capacity
100%
95%
Note: Percentage as an index of the capacity at 25(=1,250mAh) is 100%.
7.8 Discharge rate capabilities
Discharge capacity is measured with the various currents in under table and 2.5V
cut-off after the standard charge.
Discharge condition
Current
0.26A
4A
10A 15A
Relative
Capacity
104%
97%
100%
97%
Note: Percentage as an index of the capacity at 25(=1,250mAh) is 100%.
18A
95%
7.9-1 Cycle life
Each cycle is an interval between the standard charge and the discharge (discharge
current 15A) with 2.5V cut-off.
Capacity after 350cycles,
Capacity 750mAh (60% of the standard capacity at 25)
7.9-2 Cycle life2
Each cycle is an interval between the standard charge and the discharge (discharge
current 18A) with 2.5V cut-off.
Capacity after 250cycles,
Capacity 750mAh (60% of the standard capacity at 25)
7.10 Storage characteristics
Capacity after storage for 30days at 60from the standard charge,
measured with discharge current 10A with 2.5V cut-off at 25.
- 4 /18 -