SGL-06SMT2.pdf 데이터시트 (총 5 페이지) - 파일 다운로드 SGL-06SMT2 데이타시트 다운로드

No Preview Available !

SGL-06SMT2
Low Noise Amplifier
5MHz to 4000MHz
RFMD’s SGL-06SMT2 is a low noise, high gain MMIC LNA
designed for low power, single supply operation from 2.7V to
3.6V. Its Class-1C ESD protection ensures rugged
performance, while its integrated active bias circuit provides
stable gain over temperature. SGL-06SMT2 is internally
matched from 5MHz to 4000MHz and requires minimal
external components. The SGL-06SMT2 die is fabricated
using highly repeatable Silicon Germanium technology and is
packaged in a hermetic SMT2 package.
SGL-06SMT2
Package: SMT2, 4-pin, 11.42mm x
11.42mm x 4.32mm
Features
27dB Gain at 1.575GHz
1.4dB Noise Figure at 1.575GHz
Single 3.3V Supply Operation
Integrated Active Bias Circuit
Hermetic Package
MIL-STD-883 Screening
Applications
GPS Receivers
Military and Industrial
Functional Block Diagram
Ordering Information
SGL-06SMT2
.005GHz to 4GHz LNA, SMT-2 package
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
DS140306
RF MICRO DEVICES® and RFMD® are trademarks of RFMD, LLC. BLUETOOTH is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed for use by RFMD. All other trade names,
trademarks, and registered trademarks are the property of their respective owners. ©2013, RF Micro Devices, Inc.
1 of 5

No Preview Available !

SGL-06SMT2
Absolute Maximum Ratings
Parameter
Rating
Unit
Device Current (ID)
30 mA
Device Voltage (VD)
RF Input Power (See Note)
4V
-10 dBm
Junction Temperature (TJ)
Operating Temperature Range (TL)
Storage Temperature Range
+150
-40 to +85
-65 to +150
W
°C
°C
ESD Rating - Human Body Model (HBM)
Class 1C
*Note: Survival Rating. ZLOAD = 50Ω. Max recommended input power for continuous operation:
-20dBm.
Nominal Operating Parameters
Parameter
Specification
Unit
Min Typ Max
General Performance
Device Operating Current
7.5 10.0 12.5 mA
32.0 35.0 38.0 dB 5MHz
Small Signal Gain
24.0 27.0 30.0 dB 1.575GHz
14.0 17.0 20.0 dB 3.55GHz
Input Return Loss
-13.5 -9.5 dB 1.575GHz
Output Return Loss
-17.0 -9.5
Output Power at 1dB Compression 3.3 5.5
dB 1.575GHz
dB 1.575GHz
Noise Figure
1.4 1.9 dBm 1.575GHz
Thermal Resistance
173 °C/W Junction to Case
Caution! ESD sensitive device.
Exceeding any one or a combination of the Absolute
Maximum Rating conditions may cause permanent
damage to the device. Extended application of Absolute
Maximum Rating conditions to the device may reduce
device reliability. Specified typical performance or
functional operation of the device under Absolute
Maximum Rating conditions is not implied.
Condition
Parameter
Small Signal Gain
Input Return Loss
Output Return Loss
Reverse Isolation
Output Power at 1dB
Compression
Noise Figure
Unit
dB
dB
dB
dB
dBm
dB
10MHz
35.0
-11.2
-12.6
-40.1
100MHz
34.9
-11.3
-12.8
-40.0
9.5 9.4
1.1 1.0
450MHz
33.7
-11.8
-12.9
-40.2
10.1
1.0
850MHz
31.5
-12.4
-14.1
f
1.575GHz
27.0
-13.5
-17.0
-39.0
1.95GHz
25.3
-15.9
-15.9
-37.1
2.44GHz
22.7
-23.5
-12.5
-35.0
3.55GHz
17.0
-14.1
-10.0
-32.0
8.4 5.5 4.9 3.6 0.6
1.1 1.4 1.6
-
-
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140306
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
2 of 5

No Preview Available !

SGL-06SMT2
Typical Performance: 50Ω Test Fixture with Bias Tees, VS = 3.3V, ID = 10.0mA
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140306
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
3 of 5

No Preview Available !

SGL-06SMT2
Typical Performance: 100MHz to 4GHz Application Circuit, VS = 3.3V, ID = 10.0mA
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140306
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
4 of 5

No Preview Available !

SGL-06SMT2
SMT2 Package Outline
Application Circuit Schematic 100MHz to 4GHz
RF Micro Devices Inc. 7628 Thorndike Road, Greensboro, NC 27409-9421
DS140306
For sales or technical support, contact RFMD at +1.336.678.5570 or customerservice@rfmd.com.
The information in this publication is believed to be accurate. However, no responsibility is assumed by RF Micro Devices, Inc. ("RFMD") for its use, nor for any infringement of patents or other rights of
third parties resulting from its use. No license is granted by implication or otherwise under any patent or patent rights of RFMD. RFMD reserves the right to change component circuitry, recommended
application circuitry and specifications at any time without prior notice.
5 of 5