VBT6045C-E3.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 VBT6045C-E3 데이타시트 다운로드

No Preview Available !

www.vishay.com
VBT6045C-E3
Vishay General Semiconductor
Dual Low-Voltage Trench MOS Barrier Schottky Rectifier
Ultra Low VF = 0.33 V at IF = 10 A
TMBS ®
TO-263AB
K
2
1
FEATURES
• Trench MOS Schottky technology
• Low forward voltage drop, low power losses
• High efficiency operation
• Meets MSL level 1, per J-STD-020, LF maximum
peak of 245 °C
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
VBT6045C
PIN 1
K
PIN 2
HEATSINK
TYPICAL APPLICATIONS
For use in high frequency DC/DC converters, switching
power supplies, freewheeling diodes, OR-ing diode, and
reverse battery protection.
PRIMARY CHARACTERISTICS
IF(AV)
VRRM
IFSM
VF at IF = 30 A
TJ max.
Package
2 x 30 A
45 V
320 A
0.47 V
150 °C
TO-263AB
Diode variations
Common cathode
MECHANICAL DATA
Case: TO-263AB
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: As marked
Mounting Torque: 10 in-lbs maximum
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Maximum repetitive peak reverse voltage
Maximum average forward rectified current
(fig. 1)
per device
per diode
VRRM
IF(AV)
Peak forward surge current 8.3 ms single half sine-wave
superimposed on rated load
IFSM
Operating junction and storage temperature range
TJ, TSTG
VBT6045C
45
60
30
320
-40 to +150
UNIT
V
A
A
°C
Revision: 09-Sep-13
1 Document Number: 89362
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

www.vishay.com
VBT6045C-E3
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
SYMBOL
Instantaneous forward voltage per diode
Reverse current per diode
IF = 10 A
IF = 15 A
IF = 30 A
IF = 10 A
IF = 15 A
IF = 30 A
VR = 45 V
Notes
(1) Pulse test: 300 μs pulse width, 1 % duty cycle
(2) Pulse test: Pulse width 40 ms
TA = 25 °C
TA = 125 °C
TA = 25 °C
TA = 125 °C
VF (1)
IR (2)
TYP.
0.44
0.47
0.54
0.33
0.37
0.47
-
18
MAX.
-
-
0.64
-
-
0.56
3000
50
UNIT
V
μA
mA
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
Typical thermal resistance
per diode
per device
RJC
VBT64045C
1.5
0.8
UNIT
°C/W
ORDERING INFORMATION (Example)
PACKAGE
PREFERRED P/N UNIT WEIGHT (g)
TO-263AB
VBT6045C-E3/4W
1.38
TO-263AB
VBT6045C-E3/8W
1.38
PACKAGE CODE
4W
8W
BASE QUANTITY
50/tube
800/reel
DELIVERY MODE
Tube
Tape and reel
RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)
70
60
50
40
30
20
10
0
100
110 120 130 140
Case Temperature (°C)
150
Fig. 1 - Maximum Forward Current Derating Curve
20
18
D = 0.5
D = 0.3
D = 0.8
16
14
D = 0.2
12
10
D = 0.1
8
6
D = 1.0
T
4
2
D = tp/T
tp
0
0 5 10 15 20 25 30 35
Average Forward Current (A)
Fig. 2 - Forward Power Loss Characteristics Per Diode
Revision: 09-Sep-13
2 Document Number: 89362
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

www.vishay.com
100
TA = 150 °C
10
TA = 125 °C
TA = 100 °C
1
TA = 25 °C
0.1
0
0.1 0.2 0.3 0.4 0.5 0.6
Instantaneous Forward Voltage (V)
0.7
Fig. 3 - Typical Instantaneous Forward Characteristics Per Diode
VBT6045C-E3
Vishay General Semiconductor
100 000
10 000
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
1000
100
0.1
1 10
Reverse Voltage (V)
100
Fig. 5 - Typical Junction Capacitance Per Diode
100
TA = 150 °C
TA = 125 °C
10
TA = 100 °C
1
0.1
0.01
TA = 25 °C
10
Junction to Case
1
0.001
20 40 60 80 100
Percent of Rated Peak Reverse Voltage (%)
Fig. 4 - Typical Reverse Characteristics Per Diode
0.1
0.01
0.1 1 10
t - Pulse Duration (s)
100
Fig. 6 - Typical Transient Thermal Impedance Per Diode
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
TO-263AB
0.411 (10.45)
0.380 (9.65)
0.245 (6.22)
MIN.
K
0.190 (4.83)
0.160 (4.06)
0.360 (9.14)
0.320 (8.13)
1K2
0.624 (15.85)
0.591 (15.00)
0.037 (0.940)
0.027 (0.686)
0.105 (2.67)
0.095 (2.41)
0.205 (5.20)
0.195 (4.95)
0.055 (1.40)
0.045 (1.14)
0.055 (1.40)
0.047 (1.19)
0 to 0.01 (0 to 0.254)
0.110 (2.79)
0.090 (2.29)
0.021 (0.53)
0.014 (0.36)
0.140 (3.56)
0.110 (2.79)
Mounting Pad Layout
0.42 (10.66) MIN.
0.670 (17.02)
0.591 (15.00)
0.08 (2.032) MIN.
0.105 (2.67)
0.095 (2.41)
0.33 (8.38) MIN.
0.15 (3.81) MIN.
Revision: 09-Sep-13
3 Document Number: 89362
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

No Preview Available !

www.vishay.com
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1 Document Number: 91000