CPH6201.pdf 데이터시트 (총 4 페이지) - 파일 다운로드 CPH6201 데이타시트 다운로드

No Preview Available !

Ordering number:ENN5809
PNP/NPN Epitaxial Planar Silicon Transistors
CPH6101/CPH6201
High-Current Switching Applications
Applications
· DC-DC converter, relay drivers, lamp drivers, motor
drivers, strobes.
Package Dimensions
unit:mm
2146A
Features
· Adoption of FBET, MBIT processes.
· High current capacitance.
· Low collector-to-emitter saturation voltage.
· High-speed switching.
· Ultrasmall package permitting applied sets to be
made small and slim (0.9mm).
· High allowable power dissipation.
( ) : CPH6101
Specifications
[CPH6101/6201]
2.9
6 54
0.15
0.05
12 3
0.95
0.4
1 : Collector
2 : Collector
3 : Base
4 : Emitter
5 : Collector
6 : Collector
SANYO : CPH6
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Collector-to-Base Voltage
Collector-to-Emitter Voltage
Emitter-to-Base Voltage
Collector Current
Collector Current (Pulse)
Base Current
Collector Dissipation
Junction Temperature
Storage Temperature
Symbol
VCBO
VCEO
VEBO
IC
ICP
IB
PC
Tj
Tstg
Conditions
Mounted on a ceramic board (600mm2×0.8mm)
Ratings
(–)30
(–)30
(–)6
(–)2
(–)4
(–)400
1.3
150
–55 to +150
Unit
V
V
V
A
A
mA
W
˚C
˚C
Electrical Characteristics at Ta = 25˚C
Parameter
Collector Cutoff Current
Emitter Cutoff Current
DC Current Gain
Gain-Bandwidth Product
Output Capacitance
Symbol
Conditions
ICBO
IEBO
hFE
fT
Cob
VCB=(–)20V, IE=0
VEB=(–)3V, IC=0
VCE=(–)2V, IC=(–)100mA
VCE=(–)10V, IC=(–)50mA
VCB=(–)10V, f=1MHz
Ratings
min typ max
Unit
(–)0.1 µA
(–)0.1 µA
200 400
150 MHz
(32)19
pF
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircraft’s
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
D1099TS (KOTO) TA-1948 No.5809–1/4

No Preview Available !

CPH6101/CPH6201
Continued from preceding page.
Parameter
Collector-to-Emitter Saturation Voltage
Base-to-Emitter Saturation Voltage
Collector-to-Base Breakdown Voltage
Collector-to-Emitter Breakdown Voltage
Emitter-to-Base Breakdown Voltage
Turn-ON Time
Storage Time
Fall Time
Switching Time Test Circuit
Symbol
Conditions
VCE(sat) IC=()1.5A, IB=()75mA
VBE(sat)
V(BR)CBO
V(BR)CEO
V(BR)EBO
ton
IC=()1.5A, IB=()75mA
IC=()10µA, IE=0
IC=()1mA, RBE=
IE=()10µA, IC=0
See specified test circuit.
tstg See specified test circuit.
tf See specified test circuit.
PW=20µs
D.C.1%
INPUT
IB1
IB2
RB
VR
50
100µF
OUTPUT
RL
470µF
VBE=5V
VCC=12V
20IB1=20IB2=IC=500mA
(For PNP, the polarity is reversed.)
Ratings
min typ
(350)
180
()0.85
()30
()30
()6
60(60)
500
(350)
25(25)
max
(600)
400
()1.2
Unit
mV
mV
V
V
V
V
ns
ns
ns
ns
No.58092/4

No Preview Available !

CPH6101/CPH6201
No.58093/4

No Preview Available !

CPH6101/CPH6201
Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be exported without obtaining the export license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of December, 1999. Specifications and information herein are subject
to change without notice.
PS No.58094/4