|
Free integrated circuits, diodes, triacs, and other semiconductors Datasheet Search and Download Site
| datasheet.co.kr > datasheet > 4050B > Hex Inverting Buffer / Hex Non-Inverting Buffer |
|
|
Hex Inverting Buffer / Hex Non-Inverting BufferMaker : Fairchild Semiconductor
Shortcut : 4050B |
|
Product Information |
|
CD4049UBC • CD4050BC Hex Inverting Buffer • Hex Non-Inverting Buffer October 1987 Revised January 1999 CD4049UBC • CD4050BC Hex Inverting Buffer • Hex Non-Inverting Buffer General Description The CD4049UBC and CD4050BC hex buffers are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P-channel enhancement mode transistors. These devices feature logic level conversion using only one supply voltage (VDD ). The input signal high level (VIH) can exceed the VDD supply voltage when these devices are used for logic level conversions. These devices are intended for use as hex buffers, CMOS to DTL/ TTL converters, or as CMOS current drivers, and at VDD = 5.0V, they can drive directly two DTL/TTL loads over the full operating temperature range. Features s Wide supply voltage range: 3.0V to 15V s Direct drive to 2 TTL loads at 5.0V over full temperature range s High source and sink current capability s Special input protection permits input voltages greater than VDD Applications • CMOS hex inverter/buffer • CMOS to DTL/TTL hex converter • CMOS current “sink” or “source” driver • CMOS HIGH-to-LOW logic level converter Ordering Code: Order Number CD4049UBCM CD4049UBCN CD4050BCM CD4050BCN Package Number M16A N16E M16A N16E Package Description 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagrams Pin Assignments for DIP CD4049UBC CD4050BC Top View Top View © 1999 Fairchild Semiconductor Corporation DS005971.prf www.fairchildsemi.com CD4049UBC • CD4050BC Schematic Diagrams CD4049UBC 1 of 6 Identical Units CD4050BC 1 of 6 Identical Units www.fairchildsemi.com 2 CD4049UBC • CD4050BC Absolute Maximum Ratings(Note 1) (Note 2) Supply Voltage (VDD) Input Voltage (VIN) Voltage at Any Output Pin (VOUT) Storage Temperature Range (TS) Power Dissipation (PD) Dual-In-Line Small Outline Lead Temperature (TL) (Soldering, 10 seconds) 260°C 700 mW 500 mW −0.5V to +18V −0.5V to +18V −0.5V to VDD + 0.5V −65°C to +150°C Recommended Operating Conditions (Note 2) Supply Voltage (VDD) Input Voltage (VIN) Voltage at Any Output Pin (VOUT) Operating Temperature Range (TA) CD4049UBC, CD4050BC −40°C to +85°C Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed; they are not meant to imply that the devices should be operated at these limits. The table of “Recommended Operating Conditions” and “Electrical Characteristics” provides conditions for actual device operation. Note 2: VSS = 0V unless otherwise specified. 3V to 15V 0V to 15V 0 to VDD DC Electrical Characteristics (Note 3) Symbol IDD Parameter Quiescent Device Current VDD = 5V VDD = 10V VDD = 15V VOL LOW Level Output Voltage VIH = VDD, VIL = 0V, |IO| < 1 µA VDD = 5V VDD = 10V VDD = 15V VOH HIGH Level Output Voltage VIH = VDD, VIL = 0V, |IO| < 1 µA VDD = 5V VDD = 10V VDD = 15V VIL LOW Level Input Voltage (CD4050BC Only) |IO| < 1 µA VDD = 5V, VO = 0.5V VDD = 10V, VO = 1V VDD = 15V, VO = 1.5V VIL LOW Level Input Voltage (CD4049UBC Only) |IO| < 1 µA VDD = 5V, VO = 4.5V VDD = 10V, VO = 9V VDD = 15V, VO = 13.5V VIH HIGH Level Input Voltage (CD4050BC Only) |IO| < 1 µA VDD = 5V, VO = 4.5V VDD = 10V, VO = 9V VDD = 15V, VO = 13.5V VIH HIGH Level Input Voltage (CD4049UBC Only) |IO| < 1 µA VDD = 5V, VO = 0.5V VDD = 10V, VO = 1V VDD = 15V, VO = 1.5V IOL LOW Level Output Current (Note 4) VIH = VDD, VIL = 0V VDD = 5V, VO = 0.4V VDD = 10V, VO = 0.5V VDD = 15V, VO = 1.5V IOH HIGH Level Output Current (Note 4) VIH = VDD, VIL = 0V VDD = 5V, VO = 4.6V VDD = 10V, VO = 9.5V VDD = 15V, VO = 13.... |
|
Link URL |
| http://www.datasheet.co.kr/datasheet-html/4/0/5/4050B_FairchildSemiconductor.pdf.html |
|
Since 2010 - jixjix@gmail.com -
MOSFET -
TTL -
LINEAR VOLTAGE REGULATOR |