|
Free integrated circuits, diodes, triacs, and other semiconductors Datasheet Search and Download Site
| datasheet.co.kr > datasheet > 4051 > 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS |
|
|
8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERSMaker : UTC
Shortcut : 405 4050B 4051 4051B 4052 4052-7012 4052-7024 4052-8024 4052-8110 4052-8230 4053 |
|
Product Information |
|
UNISONIC TECHNOLOGIES CO., LTD 4051 8-CHANNEL ANALOG MULTIPLEXERS/DEMULTIPLEXERS SOP-16 CMOS IC DESCRIPTION UTC 4051 is single 8-channel analog multiplexers/demultiplexers for application as digitally–controlled analog switches. The device has three binary control inputs and an inhibit input. It feature low ON impedance and very low OFF leakage current. Control of analog signals up to the complete supply voltage range can be achieved. DIP-16 FEATURES * Wide Analog Voltage Range: VDD–VEE = 3V~18V. (Note: VEE must be VSS) * Break-Before-Make Switching Eliminates Channel Overlap. * Linearized Transfer Characteristics * Implement an SP8T solid state switch effectively. * Pin–to–Pin Replacement for CD4051 TSSOP-16 *Pb-free plating product number: 4051L ORDERING INFORMATION www.DataSheet4U.com Order Number Normal Lead Free Plating 4051-S16-R 4051L-S16-R 4051-S16-T 4051L-S16-T 4051-P16-R 4051L-P16-R 4051-P16-T 4051L-P16-T 4051-D16-T 4051L-D16-T Package SOP-16 SOP-16 TSSOP-16 TSSOP-16 DIP-16 Packing Tape Reel Tube Tape Reel Tube Tube www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., LTD 1 of 6 QW-R502-054,A 4051 PIN CONFIGURATION X4 X6 X X7 X5 INH VEE VSS 1 2 3 4 5 6 7 8 UTC 4051 16 VDD 15 X2 14 X1 13 X0 12 X3 11 A 10 B 9 C CMOS IC PIN DESCRIPTION PIN No. 3 6 7 8 11,10,9 13,14,15,12,1,5,2,4 16 SYMBAL X INH VEE VSS A,B,C X0~X7 VDD NAME AND FUNCTION Common Input/Output Inhibit Inputs Supply Voltage Ground Binary Control Inputs Independent Inputs/Outputs Positive Supply Voltage UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 6 QW-R502-054,A 4051 ABSOLUTE MAXIMUM RATING PARAMETER DC Supply Voltage (Referenced to VEE, VSS VEE) SYMBOL VDD RATINGS -0.5 ~ +18 CMOS IC UNIT V Input or Output Voltage (DC or Transient) VIN, VOUT -0.5 ~ VDD +0.5 V (Referenced to VSS for Control Inputs and VEE for Switch I/O) Input Current (DC or Transient), per Control Pin IIN ±10 mA Switch Through Current ISW ±25 mA 500 mW Power Dissipation PD mW/ Derating above 65 7 Junction Temperature TJ 125 Operating Temperature Range TOPR -40 ~ +125 Storage Temperature Range TSTG -40 ~ +150 Note: 1.Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2.The device is guaranteed to meet performance specification within 0 ~70 operating temperature range and assured by design from –40 ~125 . ELECTRICAL CHARACTERISTICS (Ta=25 , unless otherwise specified.) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX SUPPLY REQUIREMENTS (Voltages Referenced to VEE) VDD – 3.0 VSS VEE 3 18 Power Supply Voltage Range VDD VDD=5V 0.005 5 Control Inputs: VIN = VSS or VDD Quiescent Current per Switch I/O: VEE VI/O VDD, IQ VDD=10V 0.010 10 Package and ∆Vsw 500mV(Note 2) VDD=15V 0.015 20 Ta=25 only (The channel VDD=5V (0.07 µA/kHz) f + IQ Total Supply Current (Dynamic Plus Quiescent, VDD=10V ID(AV) component, (VIN-Vout)/Ron, is (0.20 µA/kHz) f + IQ not included.) Per Package) (0.36 µA/kHz) f + IQ VDD=15V SWITCHES IN/OUT AND COMMONS OUT/IN -- X, Y, Z (Voltages Referenced to VEE) Recommended Peak–to–Peak VI/O Channel On or Off 0 VDD Voltage Into or Out of the Switch Recommended Static or Dynamic ∆Vsw Channel On 0 600 Voltage Across the Switch Output Offset Voltage VO(OFF) VIN = 0V, No Load 10 ∆Vsw 500mV VDD=5V 250 1050 ON Resistance VIN = VIL or VIH (Control), and RON VDD=10V 120 500 VIN = 0 to VDD (Switch) VDD=15V 80 280 ON Resistance Between VDD=5V 25 70 ∆RON Any Two Channels in the VDD=10V 10 50 Same Package 10 45 VDD=15V VIN = VIL or VIH (Control) ±0.05 ±100 Channel to Channel or Any Off–Channel Leakage Current IOFF One Channel, VDD=15V Capacitance, Switch I/O CI/O Inhibit = VDD 10 Capacitance, Common O/I CO/I Inhibit = VDD 17 Pins Not Adjacent 0.15 Capacitance, Feedthrough CI/O Pins Adjacent 0.47 (Channel Off) UNIT V µA µA VPP mV µV Ω Ω nA pF pF pF UNISONIC TECHNOLOGIES CO., LT... |
|
Link URL |
| http://www.datasheet.co.kr/datasheet-html/4/0/5/4051_UTC.pdf.html |
|
Since 2010 - jixjix@gmail.com -
MOSFET -
TTL -
LINEAR VOLTAGE REGULATOR |