Maker : System Logic
Part No. : 74HC05

  Datasheet PDF : 74HC05.pdf
  Cross Reference : 74HC05 Cross Reference
  Buy Component : 74HC05 Find Stock and Price

Shortcut : 74HC00  74HC00  74HC00BQ  74HC00D  74HC00DB  74HC00N  74HC00PW  74HC01  74HC02  74HC02  74HC02AP  74HC03  74HC03  74HC04  74HC04  74HC04N  74HC05  74HC05  74HC05  74HC05  74HC05  74HC05  74HC07  74HC08  74HC08  74HC08  74HC09 

Product Information

SL74HC05 Hex Inverter with Open-Drain Outputs High-Performance Silicon-Gate CMOS The SL74HC05 is identical in pinout to the LS/ALS05. The device inputs are compatible with standard CMOS outputs; with pullup resistors, they are compatible with LS/ALSTTL outputs. This device contains six independent gates, each of which performs the logic INVERT function. The open-drain outputs require external pull-up resistors for proper logical operation. They may be connected to other open-drain outputs to implement active-high wired-AND functions. • Outputs Directly Interface to CMOS, NMOS, and TTL • Operating Voltage Range: 2.0 to 6.0 V • Low Input Current: 1.0 µA • High Noise Immunity Characteristic of CMOS Devices ORDERING INFORMATION SL74HC05N Plastic SL74HC05D SOIC TA = -55° to 125° C for all packages LOGIC DIAGRAM PIN ASSIGNMENT FUNCTION TABLE Inputs A L H PIN 14 =VCC PIN 7 = GND Z = High Impedance Output Y Z L SLS System Logic Semiconductor SL74HC05 MAXIMUM RATINGS * Symbol VCC VIN VOUT IIN IOUT ICC PD Tstg TL * Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage (Referenced to GND) DC Output Voltage (Referenced to GND) DC Input Current, per Pin DC Output Current, per Pin DC Supply Current, VCC and GND Pins Power Dissipation in Still Air, Plastic DIP+ SOIC Package+ Storage Temperature Lead Temperature, 1 mm from Case for 10 Seconds (Plastic DIP or SOIC Package) Value -0.5 to +7.0 -1.5 to VCC +1.5 -0.5 to VCC +0.5 ±20 ±25 ±50 750 500 -65 to +150 260 Unit V V V mA mA mA mW °C °C Maximum Ratings are those values beyond which damage to the device may occur. Functional operation should be restricted to the Recommended Operating Conditions. +Derating - Plastic DIP: - 10 mW/°C from 65° to 125°C SOIC Package: : - 7 mW/°C from 65° to 125°C RECOMMENDED OPERATING CONDITIONS Symbol VCC VIN, VOUT TA tr, t f Parameter DC Supply Voltage (Referenced to GND) DC Input Voltage, Output Voltage (Referenced to GND) Operating Temperature, All Package Types Input Rise and Fall Time (Figure 1) VCC =2.0 V VCC =4.5 V VCC =6.0 V Min 2.0 0 -55 0 0 0 Max 6.0 VCC +125 1000 500 400 Unit V V °C ns This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, VIN and VOUT should be constrained to the range GND≤(VIN or VOUT)≤VCC. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either GND or V ). CC Unused outputs must be left open. SLS System Logic Semiconductor SL74HC05 DC ELECTRICAL CHARACTERISTICS (Voltages Referenced to GND) VCC Symbol Parameter Test Conditions V Guaranteed Limit 25 °C to -55°C 1.5 3.15 4.2 0.5 1.35 1.8 0.1 0.1 0.1 0.26 0.26 ±0.1 1.0 ≤85 °C 1.5 3.15 4.2 0.5 1.35 1.8 0.1 0.1 0.1 0.33 0.33 ±1.0 10 ≤125 °C 1.5 3.15 4.2 0.5 1.35 1.8 0.1 0.1 0.1 0.4 0.4 ±1.0 40 µA µA Unit VIH Minimum High-Level Input Voltage Maximum Low -Level Input Voltage Maximum Low-Level Output Voltage VOUT=0.1 V IOUT≤ 20 µA VOUT= VCC-0.1 V or 0.1 V IOUT ≤ 20 µA VIN=VIH IOUT ≤ 20 µA VIN=VIH IOUT ≤ 4.0 mA IOUT ≤ 5.2 mA 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 4.5 6.0 6.0 6.0 V VIL V VOL V IIN ICC Maximum Input Leakage Current Maximum Quiescent Supply Current (per Package) Maximum Three-State Leakage Current VIN=VCC or GND VIN=VCC or GND IOUT=0µA Output in High-Impedance State VIN= VIL or VIH IOUT= VCC or GND IOZ 6.0 ±0.5 ±5.0 ±10 µA SLS System Logic Semiconductor SL74HC05 AC ELECTRICAL CHARACTERISTICS (CL=50pF,Input t r=t f=6.0 ns) VCC Symbol tPLZ, t PZL Parameter Maximum Propagation Delay, Input A to Output Y (Figures 1 and 2) Maximum Output Transition Time, Any Output (Figures 1 and 2) Maximum Input Capacitance Maximum Three-State Output Capacitance (Output in High-Impedance State) V 2.0 4.5 6.0 2.0 4.5 6.0...

Link URL