Maker : AUO
Part No. : G150XG01

  Datasheet PDF : G150XG01.pdf
  Cross Reference : G150XG01 Cross Reference
  Buy Component : G150XG01 Find Stock and Price

Shortcut : G150XG01  G150XG01_V1  G150XG01_V2  G150XG01_V3  G150XG02_V0  G150XG02_V1  G150XG03  G150XG03  G150XG03_V0  G150XG03_V1  G150XG03_V2  G150XG03_V3 

Product Information

www.DataSheet4U.net Version: 1.0 Total pages: 28 Date: February 6, 2004 AU OPTRONICS CORPORATION Product Specifications 15.0” XGA Color TFT-LCD Module Model Name: G150XG01 V.0 Approved by Prepared by Martin Sun Yen Chuang AU Optronics Croporation Customer Checked & Approved by All (C) Copyright AU Optronics, Inc. 2004 All Rights Reserved. No Reproduction and Redistribution Allowed G150XG01 V.0 www.DataSheet4U.net 1/28 www.DataSheet4U.net Version: 1.0 Total pages: 28 Date: February 6, 2004 Product Specification 15.0” XGA Color TFT-LCD Module Model Name: G150XG01 V.0 (u) Preliminary Specifications ( ) Final Specifications (C) Copyright AU Optronics, Inc. 2004 All Rights Reserved. No Reproduction and Redistribution Allowed G150XG01 V.0 www.DataSheet4U.net 2/28 www.DataSheet4U.net i Contents 1.0 Handling Precautions 2.0 General Description 2.1 Display Characteristics 2.2 Functional Block Diagram P. 6 P. 7 3.0 Absolute Maximum Ratings 4.0 Optical Characteristics 4.1 Signal for Lamp connector 4.2 Parameter guideline for CCFL Inverter P. 12 P. 13 5.0 Signal Interface 5.1 Module Interface Connectors 5.2 Module Connector Pin Configuration 5.3 Backlight Connectors 5.4 Backlight Connector Pin Configuration 5.5 Signal Electrical Characteristics 5.6 Interface Timing Characteristics 5.7 Interface Timing Definition P. 14 6.0 Pixel Format Image 7.0 Power Consumption 8.0 Power ON/OFF Sequence 9.0 Backlight Characteristics 9.1 Signal for Lamp connector 9.2 Parameter guideline for CCFL Inverter P. 19 P. 20 P. 20 P. 21 10.0 Vibration, Shock, and Drop 10.1 Vibration & Shock 10.1.1 Vibration Test Spec 10.1.2 Shock Test Spec 10.2 Drop P. 22 11.0 Environment 11.1 Temperature and Humidity 11.1.1 Operating Conditions 11.1.2 Shipping Conditions 11.2 Atmospheric Pressure 11.3 Thermal Shock P. 23 (C) Copyright AU Optronics, Inc. 2004 All Rights Reserved. No Reproduction and Redistribution Allowed G150XG01 V.0 www.DataSheet4U.net 3/28 www.DataSheet4U.net 12.0 Reliability 12.1 Failure criteria 12.2 Failure rate 12.2.1 Usage 12.2.2 Components de-rating 12.3 CCFL life 12.4 ON/OFF cycle P. 24 13.0 Safety 13.1 Sharp edge requirement 13.2 Material 13.2.1 Toxicity 13.2.2 Flammability 13.3 Capacitors 13.4 Hazardous voltage P. 25 14.0 Other requirements 14.1 Smoke free design 14.2 National test lab requirement P. 25 15.0 Label 16.0 Mechanical Characteristics P. 25 P. 26 (C) Copyright AU Optronics, Inc. 2004 All Rights Reserved. No Reproduction and Redistribution Allowed G150XG01 V.0 www.DataSheet4U.net 4/28 www.DataSheet4U.net ii Record of Revision Version and Date Page 1.0 Feb. 6, 2004 All Old description N/A New Description First Edition for Customers Remark (C) Copyright AU Optronics, Inc. 2004 All Rights Reserved. No Reproduction and Redistribution Allowed G150XG01 V.0 www.DataSheet4U.net 5/28 www.DataSheet4U.net 1.0 Handling Precautions 1) Since front polarizer is easily damaged, pay attention not to scratch it. 2) Be sure to turn off power supply when inserting or disconnecting from input connector. 3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots. 4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when handling. 7) Do not open nor modify the Module Assembly. 8) Do not press the reflector sheet at the back of the module to any directions. 9) In case if a Module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the CCFL Reflector edge. Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT Module may be damaged. 10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the I...

Link URL