Maker : Intersil Corporation
Part No. : ISL6316

  Datasheet PDF : ISL6316.pdf
  Cross Reference : ISL6316 Cross Reference
  Buy Component : ISL6316 Find Stock and Price

Shortcut : ISL6310  ISL6312  ISL6312A  ISL6313  ISL6313B  ISL6314  ISL6315  ISL6316 

Product Information

www.DataSheet4U.com ® ISL6316 Data Sheet August 31, 2005 FN9227.0 Enhanced 4-Phase PWM Controller with 6-Bit VID Code Capable of Precision RDS(ON) or DCR Differential Current Sensing for VR10 Application The ISL6316 controls microprocessor core voltage regulation by driving up to 4 synchronous-rectified buck channels in parallel. Multiphase buck converter architecture uses interleaved timing to multiply channel ripple frequency and reduce input and output ripple currents. Lower ripple results in fewer components, lower component cost, reduced power dissipation, and smaller implementation area. Microprocessor loads can generate load transients with extremely fast edge rates. The ISL6316 features a high bandwidth control loop and ripple frequencies up to >4MHz to provide optimal response to the transients. Today’s microprocessors require a tightly regulated output voltage position versus load current (droop). The ISL6316 senses current by utilizing patented techniques to measure the voltage across the on resistance, RDS(ON), of the lower MOSFETs or DCR of the output inductor during the lower MOSFET conduction intervals. Current sensing provides the needed signals for precision droop, channel-current balancing, and over-current protection. A programmable internal temperature compensation function is implemented to effectively compensate for the temperature coefficient of the current sense element. A unity gain, differential amplifier is provided for remote voltage sensing. Any potential difference between remote and local grounds can be completely eliminated using the remotesense amplifier. Eliminating ground differences improves regulation and protection accuracy. The threshold-sensitive enable input is available to accurately coordinate the start up of the ISL6316 with any other voltage rail. Dynamic-VID™ technology allows seamless on-the-fly VID changes. The offset pin allows accurate voltage offset settings that are independent of VID setting. Features • Precision Multiphase Core Voltage Regulation - Differential Remote Voltage Sensing - ±0.5% System Accuracy Over Life, Load, Line and Temperature - Adjustable Precision Reference-Voltage Offset • Precision RDS(on) or DCR Current Sensing - Accurate Load-Line Programming - Accurate Channel-Current Balancing - Differential Current Sense • Microprocessor Voltage Identification Input - Dynamic VID™ Technology - 6-Bit VID Code at 12.5mV per Bit - 0.8375V to 1.600V Operation Range • Thermal Monitoring • Programmable Temperature Compensation • Threshold-Sensitive Enable Pins to Enable VR and Ensure Power Sequencing Control • Overcurrent Protection • Overvoltage Protection • 2, 3 or 4 Phase Operation • Adjustable Switching Frequency up to 1MHz per Phase • Package Option - QFN Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat No Leads - Product Outline - QFN Near Chip Scale Package Footprint; Improves PCB Efficiency, Thinner in Profile • Pb-Free Plus Anneal Available (RoHS Compliant) Ordering Information PART NUMBER ISL6316CRZ (Note) ISL6316IRZ (Note) TEMP. (°C) PACKAGE PKG. DWG. # 0 to 70 40 Ld 6x6 QFN (Pb-free) L40.6x6 -40 to 85 40 Ld 6x6 QFN (Pb-free) L40.6x6 *Add “-T” suffix for tape and reel. NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. www.DataSheet4U.com 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Dynamic VID™ is a trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2005. All Rights Reserved Al...

Link URL