Maker : Freescale Semiconductor
Part No. : K10P144M100SF2

  Datasheet PDF : K10P144M100SF2.pdf
  Cross Reference : K10P144M100SF2 Cross Reference
  Buy Component : K10P144M100SF2 Find Stock and Price

Shortcut : K10P144M100SF2 

Product Information

Freescale Semiconductor Data Sheet: Product Preview Document Number: K10P144M100SF2 Rev. 4, 3/2011 Supports the following: MK10X128VLQ100, MK10X128VMD100, MK10X256VLQ100, MK10X256VMD100, MK10N512VLQ100, MK10N512VMD100 K10 Sub-Family Data Sheet K10P144M100SF2 Features • Operating Characteristics – Voltage range: 1.71 to 3.6 V – Flash write voltage range: 1.71 to 3.6 V – Temperature range (ambient): -40 to 105°C • Performance – Up to 100 MHz ARM Cortex-M4 core with DSP instructions delivering 1.25 Dhrystone MIPS per MHz • Memories and memory interfaces – Up to 512 KB program flash memory on nonFlexMemory devices – Up to 256 KB program flash memory on FlexMemory devices – Up to 256 KB FlexNVM on FlexMemory devices – 4 KB FlexRAM on FlexMemory devices – Up to 128 KB RAM – Serial programming interface (EzPort) – FlexBus external bus interface • Clocks – 3 to 32 MHz crystal oscillator – 32 kHz crystal oscillator – Multi-purpose clock generator • System peripherals – 10 low-power modes to provide power optimization based on application requirements – Memory protection unit with multi-master protection www.DataSheet4U.com – 16-channel DMA controller, supporting up to 64 request sources – External watchdog monitor – Software watchdog – Low-leakage wakeup unit • Security and integrity modules – Hardware CRC module to support fast cyclic redundancy checks – 128-bit unique identification (ID) number per chip • Human-machine interface – Low-power hardware touch sensor interface (TSI) – General-purpose input/output • Analog modules – Two 16-bit SAR ADCs – Programmable gain amplifier (up to x64) integrated into each ADC – Two 12-bit DACs – Three analog comparators (CMP) containing a 6-bit DAC and programmable reference input – Voltage reference • Timers – Programmable delay block – Eight-channel motor control/general purpose/PWM timer – Two 2-channel quadrature decoder/general purpose timers – Periodic interrupt timers – 16-bit low-power timer – Carrier modulator transmitter – Real-time clock • Communication interfaces – Two Controller Area Network (CAN) modules – Three SPI modules – Two I2C modules – Six UART modules – Secure Digital host controller (SDHC) – I2S module This document contains information on a product under development. Freescale reserves the right to change or discontinue this product without notice. © 2010–2011 Freescale Semiconductor, Inc. Preliminary www.DataSheet4U.com K10 Sub-Family Data Sheet Data Sheet, Rev. 4, 3/2011. 2 Preliminary Freescale Semiconductor, Inc. Table of Contents 1 Ordering parts...........................................................................4 1.1 Determining valid orderable parts......................................4 2 Part identification......................................................................4 2.1 Description.........................................................................4 2.2 Format...............................................................................4 2.3 Fields.................................................................................4 2.4 Example............................................................................5 3 Terminology and guidelines......................................................5 3.1 Definition: Operating requirement......................................5 3.2 Definition: Operating behavior...........................................6 3.3 Definition: Attribute............................................................6 3.4 Definition: Rating...............................................................7 3.5 Result of exceeding a rating..............................................7 3.6 Relationship between ratings and operating requirements......................................................................7 3.7 Guidelines for ratings and operating requirements............8 3.8 Definition: Typical valu...

Link URL