Maker : Teccor
Part No. : K1100S

  Datasheet PDF : K1100S.pdf
  Cross Reference : K1100S Cross Reference
  Buy Component : K1100S Find Stock and Price

Shortcut : K1100BA  K1100E70  K1100F  K1100G  K1100S 

Product Information

DO-15X Axial Lead DO-214AA Surface Mount TO-202AB Type 1 TO-92 Type 70 Do not use mounting tab or center lead, electrically connected SIDAC (95 - 330 Volts) 9 General Description The Sidac is a silicon bilateral voltage triggered switch with greater power-handling capabilities than standard diacs. Upon application of a voltage exceeding the Sidac breakover voltage point, the Sidac switches on through a negative resistance region to a low on-state voltage. Conduction will continue until the current is interrupted or drops below the minimum holding current of the device. Teccor offers the complete voltage range (95-330) over three different packages: • • • • TO-92 (95-280 volts) Axial lead DO-15X (95-280 volts) Surface Mount DO-214AA (95-280 volts) TO-202AB (190-330 volts) Applications • • • • • • • • • High voltage lamp ignitors Natural gas ignitors Gas oil ignitors High voltage power supplies Xenon ignitors Over voltage protector Pulse generators Fluorescent lighting ignitors HID lighting ignitors Teccor’s Sidacs feature glass passivated junctions to ensure a rugged and dependable device capable of withstanding harsh environments. Variations of devices covered in this data sheet are available for custom design applications. Please consult the factory for more information. Features • • • AC circuit oriented Glass-passivated junctions High surge current capability Teccor Electronics (972) 580-7777 9-1 SIDAC Electrical Specifications Part No. IT(RMS) VDRM VBO Breakover Voltage 50/60Hz Sine Wave (1) IDRM IBO Type On-State Repetitive RMS Current Peak TJ≤125°C Off-State 50/60Hz Voltage Sine Wave (7) (8) Repetitive Breakover Current Peak 50/60Hz Off-State Current Sine Wave 50/60Hz Sine Wave V=VDRM DO-15X TO-92 TO-202AB DO-214AA G Package E Package F Package S Package See “Package Dimensions” section for variations. K1050E70 K1100E70 K1200E70 K1300E70 K1400E70 K1500E70 K2000E70 K2200E70 K2400E70 K2500E70 K1050G K1100G K1200G K1300G K1400G K1500G K2000G K2200G K2400G K2500G K2000F1 K2200F1 K2400F1 K2401F1 K2500F1 K3000F1 K2500S K1050S K1100S K1200S K1300S K1400S K1500S K2000S K2200S K2400S Amps MAX 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 (10) 1.0 1.0 Volts MIN ±90 ±90 ±90 ±90 ±90 ±90 ±180 ±180 ±190 ±190 ±190 ±190 Volts MIN 95 104 110 120 130 140 190 205 220 220 240 270 MAX 113 118 125 138 146 170 215 230 250 250 280 330 µAmps MAX 5 5 5 5 5 5 5 5 5 5 5 5 µAmps MAX 10 10 10 10 10 10 10 10 10 10 10 10 General Notes • • • All measurements are made at 60Hz with a resistive load at an ambient temperature of +25°C unless otherwise specified. Storage temperature range (TS) is -65°C to +150°C. The case (TC) or lead (TL) temperature is measured as shown on the dimensional outline drawings. See “Package Dimensions” section of this catalog. Junction temperature range (TJ) is -40°C to +125°C. Lead solder temperature is a maximum of +230°C for 10 seconds maximum; ≥ 1/16" (1.59mm) from case. Electrical Specification Notes (1) (2) (3) (4) (5) (6) (7) See Figure 9.6 for VBO change vs junction temperature. See Figure 9.7 for IBO vs junction temperature. See Figure 9.2 for IH vs case temperature. See Figure 9.14 for test circuit. See Figure 9.1 for more than one full cycle rating. RθJA for TO-202 Type 23 and Type 41 is 70°C/watt. TC ≤ 90°C for TO-92 Sidac and TC ≤ 105°C for TO-202 Sidacs. TL ≤ 100°C for DO-15X and TL ≤ 90°C for DO-214AA. (8) See Figure 9.15 for clarification of Sidac operation. (9) For best Sidac operation, the load impedance should be near or less than switching resistance. (10) Teccor's new, improved series of sidacs is designed to ensure goodcommutationathigherswitchingfrequencies asrequiredinignitor circuits for high intensity discharge (HID) lighting. A typical circuit for a metal halide lamp ignitor is shown in the schematic, Figure 9.3. With proper component selection this circuit will produce three pulses for ignition of...

Link URL