Maker : National Semiconductor
Part No. : LM317AT

  Datasheet PDF : LM317AT.pdf
  Cross Reference : LM317AT Cross Reference
  Buy Component : LM317AT Find Stock and Price

Shortcut : LM317A  LM317AEMP  LM317AH  LM317AT 

Product Information

LM117/LM317A/LM317 3-Terminal Adjustable Regulator August 1999 LM117/LM317A/LM317 3-Terminal Adjustable Regulator General Description The LM117 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 1.5A over a 1.2V to 37V output range. They are exceptionally easy to use and require only two external resistors to set the output voltage. Further, both line and load regulation are better than standard fixed regulators. Also, the LM117 is packaged in standard transistor packages which are easily mounted and handled. In addition to higher performance than fixed regulators, the LM117 series offers full overload protection available only in IC’s. Included on the chip are current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional even if the adjustment terminal is disconnected. Normally, no capacitors are needed unless the device is situated more than 6 inches from the input filter capacitors in which case an input bypass is needed. An optional output capacitor can be added to improve transient response. The adjustment terminal can be bypassed to achieve very high ripple rejection ratios which are difficult to achieve with standard 3-terminal regulators. Besides replacing fixed regulators, the LM117 is useful in a wide variety of other applications. Since the regulator is “floating” and sees only the input-to-output differential voltage, supplies of several hundred volts can be regulated as long as the maximum input to output differential is not exceeded, i.e., avoid short-circuiting the output. Also, it makes an especially simple adjustable switching regulator, a programmable output regulator, or by connecting a fixed resistor between the adjustment pin and output, the LM117 can be used as a precision current regulator. Supplies with electronic shutdown can be achieved by clamping the adjustment terminal to ground which programs the output to 1.2V where most loads draw little current. For applications requiring greater output current, see LM150 series (3A) and LM138 series (5A) data sheets. For the negative complement, see LM137 series data sheet. Features n n n n n n n n n Guaranteed 1% output voltage tolerance (LM317A) Guaranteed max. 0.01%/V line regulation (LM317A) Guaranteed max. 0.3% load regulation (LM117) Guaranteed 1.5A output current Adjustable output down to 1.2V Current limit constant with temperature P+ Product Enhancement tested 80 dB ripple rejection Output is short-circuit protected Typical Applications 1.2V–25V Adjustable Regulator LM117 Series Packages Part Number Suffix K H T E S EMP MDT DS009063-1 Design Package TO-3 TO-39 TO-220 LCC TO-263 SOT-223 TO-252 Load Current 1.5A 0.5A 1.5A 0.5A 1.5A 1A 0.5A Full output current not available at high input-output voltages *Needed if device is more than 6 inches from filter capacitors. †Optional — improves transient response. Output capacitors in the range of 1 µF to 1000 µF of aluminum or tantalum electrolytic are commonly used to provide improved output impedance and rejection of transients. SOT-223 vs D-Pak (TO-252) Packages DS009063-54 Scale 1:1 © 1999 National Semiconductor Corporation DS009063 www.national.com Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Power Dissipation Internally Limited Input-Output Voltage Differential +40V, −0.3V Storage Temperature −65˚C to +150˚C Lead Temperature Metal Package (Soldering, 10 seconds) 300˚C Plastic Package (Soldering, 4 seconds) 260˚C ESD Tolerance (Note 5) 3 kV Operating Temperature Range LM117 LM317A LM317 −55˚C ≤ TJ ≤ +150˚C −40˚C ≤ TJ ≤ +125˚C 0˚C ≤ TJ ≤ +125˚C Preconditioning Thermal Limit Burn-In All Devices 100% Electrical Characteristics (Note 3) Specifications with standard type face are for TJ = 25˚C...

Link URL