Maker : ON Semiconductor
Part No. : LM317D2T

  Datasheet PDF : LM317D2T.pdf
  Cross Reference : LM317D2T Cross Reference
  Buy Component : LM317D2T Find Stock and Price

Shortcut : LM317D2T  LM317D2T 

Product Information

Order this document by LM317/D LM317 Three-Terminal Adjustable Output Positive Voltage Regulator The LM317 is an adjustable 3–terminal positive voltage regulator capable of supplying in excess of 1.5 A over an output voltage range of 1.2 V to 37 V. This voltage regulator is exceptionally easy to use and requires only two external resistors to set the output voltage. Further, it employs internal current limiting, thermal shutdown and safe area compensation, making it essentially blow–out proof. The LM317 serves a wide variety of applications including local, on card regulation. This device can also be used to make a programmable output regulator, or by connecting a fixed resistor between the adjustment and output, the LM317 can be used as a precision current regulator. • Output Current in Excess of 1.5 A THREE–TERMINAL ADJUSTABLE POSITIVE VOLTAGE REGULATOR SEMICONDUCTOR TECHNICAL DATA • • • • • • • Output Adjustable between 1.2 V and 37 V Internal Thermal Overload Protection Internal Short Circuit Current Limiting Constant with Temperature Output Transistor Safe–Area Compensation Floating Operation for High Voltage Applications Available in Surface Mount D2PAK, and Standard 3–Lead Transistor Package Eliminates Stocking many Fixed Voltages T SUFFIX PLASTIC PACKAGE CASE 221A Heatsink surface connected to Pin 2. 1 2 3 Standard Application Vin LM317 R1 240 IAdj Cin* 0.1 µF R2 Adjust + C ** O 1.0 µF Vout Pin 1. Adjust 2. Vout 3. Vin D2T SUFFIX PLASTIC PACKAGE CASE 936 (D2PAK) 1 2 3 Heatsink surface (shown as terminal 4 in case outline drawing) is connected to Pin 2. ORDERING INFORMATION ** Cin is required if regulator is located an appreciable distance from power supply filter. ** CO is not needed for stability, however, it does improve transient response. V out Device LM317BD2T LM317BT LM317D2T LM317T TJ = 0° to +125°C Operating Temperature Range TJ = – 40° to +125°C Package Surface Mount Insertion Mount Surface Mount Insertion Mount Rev 1 + 1.25 V 1 ) R ) IAdj R2 R2 1 Since IAdj is controlled to less than 100 µA, the error associated with this term is negligible in most applications. © Motorola, Inc. 1996 MOTOROLA ANALOG IC DEVICE DATA 1 LM317 MAXIMUM RATINGS Rating Input–Output Voltage Differential Power Dissipation Case 221A TA = +25°C Thermal Resistance, Junction–to–Ambient Thermal Resistance, Junction–to–Case Case 936 (D2PAK) TA = +25°C Thermal Resistance, Junction–to–Ambient Thermal Resistance, Junction–to–Case Operating Junction Temperature Range Storage Temperature Range Symbol VI–VO Value 40 Unit Vdc PD θJA θJC PD θJA θJC TJ Tstg Internally Limited 65 5.0 Internally Limited 70 5.0 – 40 to +125 – 65 to +150 W °C/W °C/W W °C/W °C/W °C °C ELECTRICAL CHARACTERISTICS (VI–VO = 5.0 V; IO = 0.5 A for D2T and T packages; TJ = Tlow to Thigh [Note 1]; Imax and Pmax [Note 2]; unless otherwise noted.) Characteristics Line Regulation (Note 3), TA = +25°C, 3.0 V ≤ VI–VO ≤ 40 V Load Regulation (Note 3), TA = +25°C, 10 mA ≤ IO ≤ Imax VO ≤ 5.0 V VO ≥ 5.0 V Thermal Regulation, TA = +25°C (Note 6), 20 ms Pulse Adjustment Pin Current Adjustment Pin Current Change, 2.5 V ≤ VI–VO ≤ 40 V, 10 mA ≤ IL ≤ Imax, PD ≤ Pmax Reference Voltage, 3.0 V ≤ VI–VO ≤ 40 V, 10 mA ≤ IO ≤ Imax, PD ≤ Pmax Line Regulation (Note 3), 3.0 V ≤ VI–VO ≤ 40 V Load Regulation (Note 3), 10 mA ≤ IO ≤ Imax VO ≤ 5.0 V VO ≥ 5.0 V Temperature Stability (Tlow ≤ TJ ≤ Thigh) Minimum Load Current to Maintain Regulation (VI–VO = 40 V) Maximum Output Current VI–VO ≤ 15 V, PD ≤ Pmax, T Package VI–VO = 40 V, PD ≤ Pmax, TA = +25°C, T Package RMS Noise, % of VO, TA = +25°C, 10 Hz ≤ f ≤ 10 kHz Ripple Rejection, VO = 10 V, f = 120 Hz (Note 4) Without CAdj CAdj = 10 µF Long–Term Stability, TJ = Thigh (Note 5), TA = +25°C for Endpoint Measurements Thermal Resistance Junction to Case, T Package 4 3 1, 2 3 1 2 Figure 1 2 Sy...

Link URL