Maker : OPTREX
Part No. : T-51756D121J-FW_A_AA

  Datasheet PDF : T-51756D121J-FW_A_AA.pdf
  Cross Reference : T-51756D121J-FW_A_AA Cross Reference
  Buy Component : T-51756D121J-FW_A_AA Find Stock and Price

Shortcut : T-51756D121J-FW-A-AA  T-51756D121J-FW_A_AA 

Product Information

om .c LCD Module Technical Specification 4U et he T-51756D121J-FW-A-AA aS at .D w w w Type No. First Edition Jul 14, 2003 Final Revision ****** Approved by (Quality Assurance Division) No. -1 2 3 4 5 6 7 8 9 10 11 ---- m o .c U t4 e e h S ta a .D w w w Item Page 1 2 3 3 6 7 CONTENTS OVERVIEW ABSOLUTE MAXIMUM RATINGS ELECTRICAL CHARACTERISTICS INTERFACE PIN CONNECTION INTERFACE TIMING BLOCK DIAGRAM 11 12 14 16 17 18 21 MECHANICAL SPECIFICATION OPTICAL CHARACTERISTICS RELIABILITY TEST CONDITION INSPECTION STANDARDS HANDLING PRECAUTIONS FOR TFT-LCD MODULE PACKAGING SPECIFICATION PRODUCT NUMBER LABELING FORMS LAMP UNIT FOR 12.1” XGA Checked by (ACI Engineering Division) Prepared by (Module Administration Group) T-51756D121J-FW-A-AA (AA) No. 2003-0113 OPTREX CORPORATION om 25 .c 27 4U et he aS at .D w w w Page 1/32 1. OVERVIEW T-51756D121J-FW-A-AA is 12.1” color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module composed of LCD panel, driver ICs, control circuit, and backlight unit. By applying 6 bit digital data, 1024 × 768, 260 K-color images are displayed on the 12.1” diagonal screen. Input power voltage is single 3.3V for LCD driving. Inverter for backlight is not included in this module. General specifications are summarized in the following table: ITEM SPECIFICATION 245.76 × 184.32 Display Area (mm) (12.106-inch diagonal) Number of Dots Pixel Pitch (mm) Color Pixel Arrangement Display Mode Number of Color Optimum Viewing Angle(Contrast ratio) Brightness (cd/m2) Module Size (mm) Module Mass (g) Backlight Unit Surface Treatment 1024 × 3 (H) × 768 (V) 0.240 (H) × 0.240 (V) RGB vertical stripe normally white 260 K 6 o’clock 300 280.0 (W) × 210.0 (H) × 12.0 (D) 720 CCFL, 2-tubes, edge-light, replaceable Antiglare and hard-coating 3H Sign “( )”represents preliminary value. Characteristic value without any note is typical value. The LCD product described in this specification is designed and manufactured for the standard use in OA equipment and consumer products, such as computers, communication equipment, industrial robots, AV equipment and so on. Do not use the LCD product for the equipment that require the extreme high level of reliability, such as aerospace applications, submarine cables, nuclear power control systems and medical or other equipment for life support. OPTREX assumes no responsibility for any damage resulting from the use of the LCD product in disregard of the conditions and handling precautions in this specification. If customers intend to use the LCD product for the above items or other no standard items, please contact our sales persons in advance. T-51756D121J-FW-A-AA (AA) No. 2003-0113 OPTREX CORPORATION Page 2/32 2. ABSOLUTE MAXIMUM RATINGS ITEM Power Supply Voltage for LCD Lamp Voltage Lamp Current Lamp Frequency Operation Temperature Note 1,2) Storage Temperature Note 2) SYMBOL VCC VL IL FL Top Tstg MIN. 0 0 0 --0 -20 MAX 6.0 2000 18 80 60 70 UNIT V Vrms mArms kHz °C °C [Note] 1) Display panel surface 2) Top,Tstg ≤ 40°C : 90%RH max. without condensation Top,Tstg > 40°C : Absolute humidity shall be less than the value of 90%RH at 40°C without condensation. 3. ELECTRICAL CHARACTERISTICS (1) TFT-LCD ITEM Power Supply Voltages for LCD *) Power Supply Currents for LCD Permissive input ripple Voltage *) at the Input connector (2) Backlight Ta = 25•Ž ITEM Lamp Voltage Lamp Current Lamp Frequency Starting Lamp Voltage Lamp Life Time SYMBOL Ambient temperature: Ta = 25•Ž SYMBOL VCC ICC VRP MIN. 3.0 --TYP. 3.3 470 -MAX. 3.6 770 100 UNIT V mA mVp-p Remarks Note A) (See: Page 5) Note B) (See: Page 6) VCC=+3.3V MIN. -6.0 30 1000 1200 50,000 TYP. 540 12.0 ----- MAX. -13.0 60 ---- UNIT Vrms mArms kHz Vrms h Remarks IL = 12.0 mArms Note 1),5) Note 2) VL IL FL VS LT Ta = 25°C Ta = 0°C Note 3) Note 3) IL = 12.0 mArms, Continuous operation Note 3),4) [Note] 1) Lamp Current measurement method (The current meter is inserted in low voltage line.) CTL LCD ...

Link URL